Challenge T-43ELC Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Challenge T-43ELC (7 pagina's) in de categorie Kluis. Deze handleiding was nuttig voor 58 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/7
Digital Home Safe
Always Read the Instruction Manual
NEVER LOCK YOUR SPARE OVERRIDE KEYS OR THE INSTRUCTION MANUAL IN THE SAFE.
ONCE THE BATTERIES DEPLETE, YOU WILL NEED TO USE THE KEYS TO OPEN THE SAFE.
SPARE KEYS ARE UNAVAILABLE!
THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING THE
OPERATION AND MAINTENANCE OF THE SAFE
COMPLETELY READ AND UNDERSTAND THE MANUAL BEFORE SECURING ITEMS IN THE SAFE
SAVE THIS MANUAL FOR FUTURE REFERENCE
MODELS: T-43ELC
SAFE DIAGRAM
-1-
Locking knob LCD (display)
Key pad
Instructions
4 x ‘AA’
batteries
Override keys 4 x rawlbolts
Concealed hinges
Key lock cover
Dia.1
NOTE: This safe is NOT re proof.
NOTE: This safe has no cash rating.
CONTENTS
1 X Instruction book
2 X Manual override keys
1 X Internal mat
4 X ‘AA’ Batteries
4 X Rawlbolts
IMPORTANT INFORMATION
This safe can be programmed with two sets of codes, User and Master. After opening the safe and
installing the batteries you should change the USER and MASTER PINS, from the factories pre-set
codes, for security reasons. You could give the user code to a guest while maintaining the master code.
OPERATING THE SAFE FOR THE FIRST TIME
Use the Manual override key to open the safe.
Remove the plastic key lock cover (dia 1)•
Insert the override key; turn it anti-clockwise, at the same time turn the locking knob clockwise and pull •
open the safe.
See • BATTERY REPLACEMENT
Keep the safe door open until you have set the PIN code.•
LCD DISPLAY
To hide the numbers from being displayed when entered, Press “START” twice before entering you’re •
PIN. “-” will be displayed instead of the number.
SPECIFICATION
T-43ELC
SIZE : 43 (w) x 35 (h) x 20 (d) Cm
NET WEIGHT: 11.25Kgs
POWER SUPPLY: 4x ‘AA’ 1.5V Batteries
INTERNAL VOLUME: 30.19 Litre
-2-
PROGRAMMING YOUR USER PIN NUMBER ( )personal identication number
DEFAULT FACTORY USER PIN: 0000
Each time a button is pressed, a beep will be heard. This is a safety feature so that you will know when
the safe is being accessed and cannot be switched off.
Keep PIN Codes in a safe place.
Do not use personal information like birthdays, telephone numbers etc.
Write down your PIN number so you do not forget it. (any •
combination of numbers from 3 to 8 digits)
With the door open, remove the security cap by unscrewing it, •
(dia.2).
Depress the red reset button located at the back of the door.•
The LCD screen displays “SEt-CodE”•
You now have 20 seconds to enter your PIN.•
Enter your PIN code. You can enter 3-8 numbers. •
Press “START” button•
“In” will be displayed on the LCD screen and two beeps will be •
heard
You PIN has now been set.•
Screw the security cap back onto the red reset button. Ensure you do this for security reasons.
While the door is open familiarise yourself with the door opening procedure, and leave the door open
untilyouaresatisedthatyoufullyunderstandtheopeningandclosingmethod.Youcanre-setthePIN
at any time by following the above procedure.
PROGRAMMING YOUR MASTER PIN NUMBER ( )personal identication number
DEFAULT FACTORY MASTER PIN: 8888
Each time a button is pressed, a beep will be heard. This is a safety feature so that you will know when
the safe is being accessed and cannot be switched off.
Keep PIN Codes in a safe place.
Do not use personal information like birthdays, telephone numbers etc.
Write down your PIN number so you do not forget it. (any •
combination of numbers from 3 to 8 digits)
With the door open, remove the security cap by unscrewing it, •
(dia.3).
Depress the red reset button located at the back of the door.•
The LCD screen displays “SEt-CodE”•
Press “START” button•
The LCD screen displays “oLd-CodE”•
EntertheexistingPIN(atrstthiswillbethefactoryPIN)•
Press “START” button•
The LCD screen displays “SET”•
You now have 20 seconds to enter your PIN.•
Enter your new PIN code. You can enter 3-8 numbers. •
Press “START” button•
The LCD screen displays “rE-inPut”•
Re-Enter your new PIN code.•
Press “START” button•
Dia.2
Security cap
covering reset
button
Dia.3
Security cap
covering reset
button
Product specificaties
| Merk: | Challenge |
| Categorie: | Kluis |
| Model: | T-43ELC |
Heb je hulp nodig?
Als je hulp nodig hebt met Challenge T-43ELC stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Kluis Challenge
26 Juli 2023
26 Juli 2023
26 Juli 2023
Handleiding Kluis
- Kluis Philips
- Kluis Honeywell
- Kluis Abus
- Kluis Avanti
- Kluis Burg-Wachter
- Kluis Dometic
- Kluis Duralock
- Kluis EasySafe
- Kluis Ferm
- Kluis Filex
- Kluis FireKing
- Kluis First Alert
- Kluis Fluke
- Kluis Hama
- Kluis Handson
- Kluis M-Locks
- Kluis Master Lock
- Kluis Nauta
- Kluis Nedis
- Kluis Perel
- Kluis Phoenix
- Kluis Protector
- Kluis Renkforce
- Kluis ROMA
- Kluis Rottner
- Kluis Royal Safe
- Kluis Royal Sovereign
- Kluis Salvus
- Kluis Sentry
- Kluis Sistec
- Kluis SMC
- Kluis Sygonix
- Kluis Technomax
- Kluis Thule
- Kluis Toolland
- Kluis Topcraft
- Kluis Tulox
- Kluis Varo
- Kluis Westfalia
- Kluis Workzone
- Kluis Yale
- Kluis Jewel
- Kluis Juwel
- Kluis Olympia
- Kluis Oxloc
- Kluis First Austria
- Kluis Guzzanti
- Kluis Steren
- Kluis Barska
- Kluis Conrad
- Kluis SereneLife
- Kluis MSW
- Kluis Hard Head
- Kluis Kidde
- Kluis SentrySafe
- Kluis CAWI
- Kluis Kreator
- Kluis Fichero
- Kluis Kreator-Varo
- Kluis Rottner Tresor
- Kluis Olymp
- Kluis Suncast
- Kluis Winholt
- Kluis Homak Security
- Kluis NOFIRE
- Kluis Stamony
Nieuwste handleidingen voor Kluis
14 December 2024
14 December 2024
6 December 2024
6 December 2024
6 December 2024
2 December 2024
2 December 2024
2 December 2024
2 December 2024
2 December 2024