Century MultiGrip Alarm T511 Handleiding

Century Niet gecategoriseerd MultiGrip Alarm T511

Lees hieronder de 📖 handleiding in het Nederlandse voor Century MultiGrip Alarm T511 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

INSTRUCTION MANUAL

TM ++

MultiGrip

MultiGrip Alarm

Alarm

Alarm (

(

()

)

T511

TM ++

MultiGrip Alarm ( )T511

RESET

RESETRESET ALARM

ALARM

ALARMALARM

HOW TO STOP ALARMING

To stop the alarm release the lock using the magnetic

detacher and it will stop.

MultiGrip

Alarm 511

(T )

When you push in the button on the end of the

handle to lock, if flashes times

continuously, it indicates that the tag is in the low battery

state.

lock

10MultiGrip Alarm

TM ++

In normal operation LED flashes once every 20 seconds while the tag is under working.

Frequency: 58KHz/8.2MHz

Dimension: Ø73x50mm

Color: black or customize

Alarm decibel: dB≥95

Battery: CR2450

Usage environment:

Temperature 0~40 (32~104F)

Humidity 20%~85%

： ℃

：

LOW BATTERY WARNING

NOTICE

SPECIFICATION

4. Releasing point

3. LED

2. Handle

1. Lock button

5. Speaker

6. Battery cover screw

8. Battery cover

7. Lanyard

COMPONENTS INSTRUCTION

HOW TO ATTACH

Unlocked

Locked

MultiGrip

Alarm 511

(T )

NOTE: .

. Pullout the lanyard;

Ensure the lock is in the “unlocked” position

. Attach around the merchandise.

. Rotate the handle clockwise to wind in the lanyards and tighten it onto the merchandise.

. Push the lock button into the "locked" position, at this point it will beep to let you know that

it is armed. (If it is pushed within 1 minutes after disarmed, no beep happens.)

. Continue to wind the handle to tighten the lanyards around the merchandise, a clicking

sound will occur as you carry this out.

. Place the detacher (standard / super) on the releasing point and press in the lock button

to enable it to pop out and release the lanyards.

. Pullout the lanyard. take merchandise out;

. Rotate the handle clockwise to wind back in the lanyards for storage, leave it in the

"unlocked" position so that it is unarmed and saving the battery life while not in use.

1 2 3

HOW TO RELEASE

MULTI ALARM TECHNOLOGY

Alarm1:

If the armed multigrip is taken into the

system will trigger system alarming.

Anti tamper, the multigrip will alarm If

the wire is cut or tampered with.

Alarm2:

Alarm2

Alarm1

HOW TO CHANGE BATTERY

MultiGrip

Alarm 511

(T )

Product specificaties

Merk:	Century
Categorie:	Niet gecategoriseerd
Model:	MultiGrip Alarm T511
Kleur van het product:	Zwart
Breedte:	73 mm
Diepte:	500 mm
Gewicht verpakking:	17700 g
Breedte verpakking:	530 mm
Diepte verpakking:	400 mm
Hoogte verpakking:	265 mm
Aantal per verpakking:	150 stuk(s)
Frequentie:	8.2 MHz