Canon Speedlite Transmiter ST-E2 Handleiding

Canon Flitser Speedlite Transmiter ST-E2

Lees hieronder de 📖 handleiding in het Nederlandse voor Canon Speedlite Transmiter ST-E2 (19 pagina's) in de categorie Flitser. Deze handleiding was nuttig voor 90 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/19
COPY
.
Thank you for purchasing a Canon product.
Speedlite Transmitter ST
-
E2 is a wireless transmit
-
ter which can control up to two Speedlite 550EX
groups set as slaves.
The transmitting range is about 12 to 15 meters
/
39.4 to 49.2 ft indoors and 8 to 10 meters
/
26.2 to
32.8 ft outdoors. With Type A cameras (EOS
-
3, EOS
Elan IIIIIE, EOS 50/50E, EOS 500NlRebel
G,
EOS
IX.
EOS
IX7AX
Lite), the ST
-
E2 can execute the fol
-
lowing operations through wireless control:
E-?"rL autoflash
High
-
speed sync (FP flash)
FE lock
Flash exposure compensation
Manual flash (Flash output set with Speedlite)
Multi
-
flash firing (Set with the Speedlites)
This Instructions booklet assume that a Type
A
cam
-
'
era is used with the ST-E2.
With Type
H
cameras (EOS cameras except 'I'ype
A
models), the ST
-
E2 can be used only for manual
flash and multi
-
flash photography. See pages 23
to 27 in this booklet and the Speedlite 550EX
Instructions.
Symbols used in this Instructions booklet:
0:
Warning for preventing camera or ST
-
E2
malfunction.
a:
Supplementary notes for using the ST
-
E2
with the camera.
:'&:
Helpful tip for using the ST
-
E2 and taking
-
,
AF-askt dea'm to areak.
-
I
I
With the EOS
-
3, the following operations are also
possible: Flash ratio control between two Speedlite
slave
P~OUDS.
modeline flash firing. and linkage of
C€
The
CE
Mark
is
a
Directive cunformity
mark
of
the
European
Community
(ECl
pictures.
Keep this Instructions booklet handy for future
reference.
1.
This digital apparatus does not exceed the Class
B
limits for radio noise emissions frnrn digital appara
-
tus as set out in the interference
-
causing equipment
standard entitled
"
Digital Apparatus
"
, ICES
-
003 of
the Industry Canada.
COPY
Contents
1.
Nomenclature
................................................................................................................
22
2.
Readying the ST-E2
.......................................................................................................
23
3.
Readying the
550EX
(Slave Setting)
............................................................................
25
4.
Basic Wireless E-TTL Autoflash Operation
.................................................................
26
5.
Wireless Multi-Flash E-TTL Autoflash Operation
......................................................
29
6.
Applications
...................................................................................................................
33
7.
Troubleshooting
.............................................................................................................
34
Specifications
.......................................................................................................................
.35
Note
All
the operation instructions in this booklet assume that the ST
-
E2 and other relevant equipment are
already turned on. Before proceeding, make sure the
ST
-
E2
and other equipment are on.
I
I
This device complies with Part
15
of the
FCC
Rules. Operation is subject to the following two conditions:
(1)
This device may not
cause harmful interference, and
(2)
this device must accept any interference receivcd, including interlilrence that may cause
undesired operation.
Do not make any changes or modifications
to
the equipment unless otherwise specified in the instructions. If such
changt.s
or
modifications should be made, you could
be
required to
stop
operation of the equipment.
This equipment has been tested and found to conlply with the limits for a class
B
digital device, pursuant
to
part
15
16
the
FCC
Rules. These limits arc designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference
to
radio communications.
However, there is no guarantec that interference will not occur in a particular installation. If this equipment does cause harmful
interference
to
radio or television reception, which can be determined by turning the equipment off and on, the user is encour;~g-ed
to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Consult the dealer or an experienced radiolIli technician for help.
21
COPY


Product specificaties

Merk: Canon
Categorie: Flitser
Model: Speedlite Transmiter ST-E2

Heb je hulp nodig?

Als je hulp nodig hebt met Canon Speedlite Transmiter ST-E2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Flitser Canon

Handleiding Flitser

Nieuwste handleidingen voor Flitser

Bolt

Bolt VS-570F Handleiding

13 December 2024
Bolt

Bolt VX-760C Handleiding

13 December 2024
Bolt

Bolt VD-420 Handleiding

13 December 2024
Vello

Vello OCS-C1.5 Handleiding

11 December 2024
Vello

Vello OCS-P3 Handleiding

11 December 2024
Vello

Vello OCS-C3 Handleiding

11 December 2024
Vello

Vello OCS-C33 Handleiding

11 December 2024
Vello

Vello OCS-NK6 Handleiding

11 December 2024
Vello

Vello OCS-NK3 Handleiding

11 December 2024
Vello

Vello OCS-NK33 Handleiding

11 December 2024