Camille Bauer SIRAX BT5400 Handleiding

Camille Bauer Niet gecategoriseerd SIRAX BT5400

Lees hieronder de 📖 handleiding in het Nederlandse voor Camille Bauer SIRAX BT5400 (36 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 137 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/36

Camille Bauer Metrawatt AG

Aargauerstrasse 7

CH-5610 Wohlen/Switzerland

Tel: +41 56 618 21 11

Fax: +41 56 618 21 21

info@cbmag.com

www.camillebauer.com

Operating Instructions

SIRAX BT5400

Transducer for Active, Apparent, Reactive Power,

Phase Angle and Power Factor

PM 1000291 000 00 Device handbook SIRAX BT5400 2/36

Legal information

Warning notices

In this document warning notices are used, which you have to observe to ensure personal safety and to prevent damage to property. Depending

on the degree of danger the following symbols are used:

Qualiﬁ ed personnel

The product described in this document may be handled by personnel only, which is qualiﬁ ed for the respective task. Qualiﬁ ed personnel have

the training and experience to identify risks and potential hazards when working with the product. Qualiﬁ ed personnel are also able to understand

and follow the given safety and warning notices.

Intended use

The product described in this document may be used only for the application speciﬁ ed. The maximum electrical supply data and ambient con-

ditions speciﬁ ed in the technical data section must be adhered. For the perfect and safe operation of the device proper transport and storage as

well as professional assembly, installation, handling and maintenance are required.

Disclaimer of liability

The content of this document has been reviewed to ensure correctness. Nevertheless it may contain errors or inconsistencies and we cannot

guarantee completeness and correctness. This is especially true for di erent language versions of this document. This document is regularly

reviewed and updated. Necessary corrections will be included in subsequent version and are available via our webpage http://www.camillebauer.

com.

Feedback

If you detect errors in this document or if there is necessary information missing, please inform us via e-mail to:

customer-support@camillebauer.com

If the warning notice is not followed death or severe personal injury result.will

If the warning notice is not followed damage to property or severe personal injury may result.

If the warning notice is not followed the device be damaged or not fulﬁ ll the expected may may

functionality.

PM 1000291 000 00 Device handbook SIRAX BT5400 3/36

Table of content

1. Introduction ……………………………………………………………………………………………………………4

1.1 Purpose of this document ………………………………………………………………………………………………4

1.2 Scope of supply …………………………………………………………………………………………………………4

1.3 Further documents ………………………………………………………………………………………………………4

2. Safety notes ……………………………………………………………………………………………………………4

3. Device overview ……………………………………………………………………………………………………………5

4. Mechanical mounting ………………………………………………………………………………………………………5

4.1 Mounting ……………………………………………………………………………………………………………5

4.2 Demounting of the device ………………………………………………………………………………………………5

5. Electrical connections ……………………………………………………………………………………………………6

5.1 General safety notes ……………………………………………………………………………………………………6

5.2 Cross sections and tightening torques ……………………………………………………………………………………6

5.3 Inputs ……………………………………………………………………………………………………………6

5.4 Power supply …………………………………………………………………………………………………………7

5.5 Connection Diagram ……………………………………………………………………………………………………8

5.6 Modbus interface RS485 …………………………………………………………………………………………………8

6. Commissioning ……………………………………………………………………………………………………………8

6.1 Operating the device …………………………………………………………………………………………………9

6.2 LED indication …………………………………………………………………………………………………………9

6.3 Input and output screens ………………………………………………………………………………………………9

7. Programming ………………………………………………………………………………………………………… 10

7.1 Programming via Front LCD & Two keys ………………………………………………………………………………… 10

7.1.1. Password Protection …………………………………………………………………………………………… 10

7.1.1.1 Password Veriﬁ cation …………………………………………………………………………………… 10

7.1.1.2 Editing Existing Password ………………………………………………………………………………… 11

7.1.2 Transducer Type Selection …………………………………………………………………………………… 12

7.1.3 System Type Selection ………………………………………………………………………………………… 12

7.1.4 Output Type Selection ………………………………………………………………………………………… 12

7.1.4.1 Output 1 Type Selection ………………………………………………………………………………… 12

7.1.4.2 Output 2 Type Selection ………………………………………………………………………………… 13

7.1.5 Potential Transformer Parameter Setting ………………………………………………………………………… 13

7.1.5.1 Potential Transformer primary value ……………………………………………………………………… 13

7.1.5.2 Potential Transformer Secondary Value …………………………………………………………………… 14

7.1.6 Current Transformer Parameter Setting ………………………………………………………………………… 15

7.1.6.1 Current Transformer Primary Value ………………………………………………………………………… 15

7.1.6.2 Current Transformer Secondary Value ……………………………………………………………………… 16

7.1.7 Communication Parameter Setting ……………………………………………………………………………… 17

7.1.7.1 Address Setting ………………………………………………………………………………………… 17

7.1.7.2 RS 485 Baud rate ……………………………………………………………………………………… 17

7.1.7.3 RS 485 Parity Selection ………………………………………………………………………………… 18

7.1.8 Input Characteristics Setting …………………………………………………………………………………… 18

7.1.8.1 End value of Input ……………………………………………………………………………………… 18

7.1.9 Output Characteristics Setting …………………………………………………………………………………… 21

7.1.9.1 Output 1 Characteristics Setting ………………………………………………………………………… 21

7.1.9.1.1 End value of output 1 ……………………………………………………………………………… 21

7.1.9.1.2 Start value of output 1 ……………………………………………………………………………… 22

7.1.9.1.3 Elbow value of output 1 ……………………………………………………………………………… 23

7.1.9.2 Output 2 Characteristics Setting ………………………………………………………………………… 24

7.1.9.2.1 End value of output 2 ……………………………………………………………………………… 24

7.1.9.2.2 Start value of output 2 ……………………………………………………………………………… 24

7.1.9.2.3 Elbow value of output 2 ……………………………………………………………………………… 25

7.1.10 Mode Selection ……………………………………………………………………………………………… 26

8. Phasor Diagram ………………………………………………………………………………………………………… 28

9. Programming via the programming connection and the PRKAB5000 programming cable ……………………………… 29

9.1. Programming via the RS485 (Modbus) interface ……………………………………………………………………… 29

9.2. DIP Switch Setting for Output ………………………………………………………………………………………… 29

Product specificaties

Merk:	Camille Bauer
Categorie:	Niet gecategoriseerd
Model:	SIRAX BT5400

Heb je hulp nodig?

Als je hulp nodig hebt met Camille Bauer SIRAX BT5400 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Camille Bauer

Camille Bauer Sineax V624 Handleiding

2 Februari 2024

Camille Bauer Sineax I552 Handleiding

2 Februari 2024

Camille Bauer Sineax M561 Handleiding

2 Februari 2024

Camille Bauer Sineax TI802 Handleiding

2 Februari 2024

Camille Bauer Sineax I542 Handleiding

2 Februari 2024

Camille Bauer Sineax VS30 Handleiding

2 Februari 2024

Camille Bauer Sineax TI801 Handleiding

2 Februari 2024

Camille Bauer Sineax U543 Handleiding

2 Februari 2024

Camille Bauer Sineax V610 Handleiding

2 Februari 2024

Camille Bauer Sineax I538 Handleiding

2 Februari 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Zipper ZI-UVGW1 Handleiding

15 November 2024

Dimplex Optiflame 3D GLN20BR3D Handleiding

15 November 2024

Tesla MultiCook M90 Premium Handleiding

15 November 2024

Scott AirFlex Pro Back Protector Handleiding

15 November 2024

Scott AirFlex Junior Back Protector Handleiding

15 November 2024

AVM FRITZ!WLAN USB Stick AC 860 Handleiding

14 November 2024

Nedis ANOR5G10WT Handleiding

14 November 2024

Nedis ANOR5G20WT Handleiding

14 November 2024

LAS 16271 Handleiding

14 November 2024

LAS 16275 Handleiding

14 November 2024