Bxterra MODBUS-110 Handleiding
Lees hieronder de š handleiding in het Nederlandse voor Bxterra MODBUS-110 (12 pagina's) in de categorie UPS. Deze handleiding was nuttig voor 5 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/12
USER GUIDE
www.bxterra.com
MODBUS CARD
MODBUS 110
1
PRODUCT INTRODUCTION
INSTALLATION & OPERATION
Thank you for purchasing this bXterra Modbus card. This manual contains instructions
and warnings that should be followed during the installation, operation and storage of
the card. Please keep this manual for future reference.
Special Precautions
ā¢ If the card is stored prior to installation, it must be stored in a dry place
ā¢ The admissible storage temperature range is from 14ĀŗF to 158ĀŗF
1. RS-485 port 2. Address switch
3. Communication setting
4. Resistance switch
The Modbus card provides UPS systems with the functionality of communication with
PCs through the Modbus protocol it also:
ā¢ Implements Modbus RTU protocol
ā¢ Provides Modbus functions including read Holding Registers and write Registers
ā¢ Provides RS-485 interface
ā¢ Provides surge protection
Follow these steps to install and use this Modbus card:
1. for details)Conī “gure Modbus ID (Refer to the Machine ID Conī “guration
2. for details)Conī “gure communication format (Refer to Communication Format
3. Insert this Modbus card into the Network slot of your UPS
4. Connect the Modbus card to a computer with a RJ-45 cable, and it is not necessary to
turn the UPS oī¦ during card installation (Refer to the Connection section for details)
2
CONFIGURATION
Machine ID Conī “guration
Communication Format Conī “guration
RS-485 Resistance Conī “guration
There are eight bits to used present
the ID of each card. Use SW1 to set the
machine ID. From left to right, itās 8 to
1. As shown in the diagram, when the
switch is pushed down, the bit is set to
ā1ā. Otherwise, the bit is set as ā0ā. The
ID of the Modbus card is set to 0x01 as
shown in the chart. Please check the
appendix for detailed ID number and
SW1 settings.
FUNCTION BIT SETTING MEANING
Baud
Rate
# 2 # 1
OFF OFF 2400bps
OFF ON 4800bps
ON OFF 9600bps
ON ON 19200bps(default)
Parity
Check
# 4 # 3
OFF OFF Even parity
ON OFF Odd parity
OFF ON No parity check 1 stop
bits (Default)
ON ON No parity check 2 stop
bits
Function Bit# Setting Meaning
Push up
resistance # 6
ON Enable (Default)
OFF Disable
Push down
resistance # 7
ON Enable (Default)
OFF Disable
Terminate
resistance # 8
ON Enable (Default)
Disable
Product specificaties
| Merk: | Bxterra |
| Categorie: | UPS |
| Model: | MODBUS-110 |
Heb je hulp nodig?
Als je hulp nodig hebt met Bxterra MODBUS-110 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding UPS Bxterra
19 Februari 2024
19 Februari 2024
19 Februari 2024
19 Februari 2024
19 Februari 2024
19 Februari 2024
19 Februari 2024
19 Februari 2024
19 Februari 2024
19 Februari 2024
Handleiding UPS
- UPS HP
- UPS IKEA
- UPS AEG
- UPS Siemens
- UPS Apc
- UPS Dell
- UPS Digitus
- UPS Eaton
- UPS Emerson
- UPS Furman
- UPS Gembird
- UPS Gys
- UPS Lenovo
- UPS LevelOne
- UPS Riello
- UPS Schneider
- UPS Voltcraft
- UPS Jung
- UPS Steren
- UPS Conceptronic
- UPS Tripp Lite
- UPS Approx
- UPS Block
- UPS LC-Power
- UPS Energenie
- UPS CyberPower
- UPS Adj
- UPS East
- UPS Equip
- UPS Liebert
- UPS Avocent
- UPS Minute Man
- UPS Minuteman
- UPS Maruson
- UPS V7
- UPS Phoenix Contact
- UPS Puls Dimension
- UPS Vanson
- UPS Salicru
- UPS SurgeX
- UPS Murr Elektronik
- UPS Altronix
- UPS Ditek
- UPS Middle Atlantic
- UPS FSP
- UPS Atlantis Land
- UPS PowerWalker
- UPS FSP/Fortron
- UPS Online USV
Nieuwste handleidingen voor UPS
14 December 2024
14 December 2024
10 December 2024
10 December 2024
8 December 2024
8 December 2024
2 December 2024
2 December 2024
2 December 2024
2 December 2024