BT Decor 210 Handleiding

BT telefoon met snoer Decor 210

Lees hieronder de 📖 handleiding in het Nederlandse voor BT Decor 210 (2 pagina's) in de categorie telefoon met snoer. Deze handleiding was nuttig voor 61 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

To make a handsfree call

Press the HANDSFREE

button.

The handsfree light will come

on and you will hear the dial

tone. The display will also

show the volume level.

Dial the telephone number.

You can now talk to your caller

through the microphone, or

pick up the handset to speak

to your caller privately.

To receive a call in

handsfree mode

Press the HANDSFREE button

when the phone rings.

To change the volume

on a handsfree call

You can adjust the speaker

volume when you are on a

handsfree call.

Press the VOLUME button.

The volume level will be

shown on the display .

There are 5 levels to choose

from. It is pre-set to the

mid-range level. Press the

VOLUME button to move up

and down each level.

To adjust the

ringer volume

There are 3 ringer volume

settings to choose from:

HIGH, LOW or OFF.

The default setting is HIGH.

Lift the handset and press the

STORE button.

Press the ✱button.

The display will show: BELL

LEVEL HI

Press either, 1for HIGH, 2

for LOW or 3for OFF.

Press the STORE button.

Your selected setting will be

displayed.

You will hear a confirmation

tone and the display will show

SAVEd.

Replace the handset.

(If the ringer is set to OFF,

the call indicator light will still

flash to indicate someone is

calling you. The display will

show RINGER OFF when you

lift the handset or use

handsfree.)

To set the ringer pitch

The ringer pitch can be set to

HIGH or LOW. The default

setting is HIGH.

Lift the handset and press the

STORE button.

Press the

button.

The display will show BELL

Pitch HI.

Press either, 1for HIGH or 2

for LOW.

Press the STORE button.

You will hear a confirmation

tone and the display will

show SAVEd.

Replace the handset.

Note

You can only change the volume

of a call when using handsfree.

Note

You can swap between using the

handset and handsfree during a

call.

If using the handset, press the

HANDSFREE button and replace

the handset.

If using handsfree, lift the handset

to talk privately.

1 2

At a glance

Setting up

Plan the location of

your BT Decor 210.

Situate your BT Decor 210 close

enough to a phone socket so

that the line cord will reach.

You can wall-mount your

product, see back page.

Plug your BT Decor 210

into the telephone

socket.

Your BT Decor 210 is now

ready for use.

Using the telephone

Safety information

General

Simply clean your BT Decor 210

with a damp (not wet) cloth, or an

antistatic wipe. Never use household

polish as this may damage the

product. Never use a dry cloth as

this may cause static shock.

Do not open the BT Decor 210.

This could expose you to high

voltages or other risks.

Environmental

Do not expose to direct sunlight.

We recommend that you do not

place the product on antique/

veneered wood to avoid damage.

Do not stand your product on

carpets or other surfaces which

generate fibres, or place it in

locations preventing free flow of

air over its surfaces.

Do not submerge any part of

your product in water and do not

use it in damp or humid

conditions, such as in bathrooms.

Do not expose your product to

fire, explosive or other hazardous

conditions.

Making and ending

calls

To make a call

Lift the handset and wait for

the dial tone.

The icon will be shown on

the display to indicate that the

phone is in use.

Dial the telephone number.

Preparatory dialling

Dial the telephone number

without lifting the handset.

It is shown on the display but

will not be dialled. If you have

entered the number incorrectly

press the HANDSFREE button

or lift the handset to clear the

number.

If the number is correct,

press the QUICKDIAL button.

Your BT Decor 210 will

automatically dial the number

using handsfree. The call can

now be taken using handsfree

or you can use the handset.

To end a call

Replace the handset.

Call timer

Your BT Decor 210

automatically times the

duration of all outgoing

external calls. The display will

show to indicate that

call timer is on. The call

duration will be shown both

during the call and for a few

seconds after it is completed.

To receive a call

When the telephone rings the

call indicator light will also

flash to indicate that there is

an incoming call. Simply pick

up the handset.

To redial the last

number called

Lift the handset.

Press the REDIAL button.

The last number called is

displayed and then dialled.

A redial number can be no

longer than 32 digits.

You can also press the REDIAL

button when the handset is

down to check the number first.

If it is correct, press the

QUICKDIAL button. The

number will be dialled

automatically using handsfree.

Secrecy/Music on hold

When on a call you can talk to

someone in the same room,

without your caller hearing.

To switch secrecy

on and off

During a call press and release

the SECRECY button.

Your caller will be put on hold

and both you and the caller

will hear music. You can now

talk to someone in the room

without your caller hearing

you. The display will flash

SECRECY to confirm secrecy

is on.

Press and release the

SECRECY button again to

return to your caller.

Handsfree talking

The handsfree feature allows

you to use the phone without

picking up the handset, giving

you more freedom when you

are speaking on the phone.

You can hear the caller’s voice

through the in-built speaker.

Note

If the telephone has been

unplugged the last number dialled

will not be saved.

Note

When secrecy is in use, and

another telephone connected to

the same line is picked up, secrecy

is cancelled and the call will be

transferred to that telephone.

Important

Your BT Decor 210 is specially

designed to operate without the

need of a mains power supply.

It is therefore necessary to make

your first call via the handset.

This call should last at least

1 minute. Subsequent calls can

now be made using the handset

or handsfree feature.

Note

Whilst storing a number in

the memory you can cancel

the operation by replacing the

handset on the cradle.

One-Touch memories

You can store your three

most frequently used

telephone numbers in the

One-Touch memories (M1,

M2 or M3). Please note that

the number can be no longer

than 18 digits.

To store a one

touch number

Lift the handset.

Press the STORE button.

The display will show Loc-.

Press the memory location

number, (M1,M2,M3), under

which you want to store the

number. The display will

show, e.g. Loc-dl if you want

to store in M1 location.

Enter the telephone number

you want to store, including

the area code if applicable.

Press the STORE button.

You will hear a confirmation

tone and the display will show

SAVEd. Replace the handset.

To dial a One-Touch

number

Lift the handset and wait for

the dial tone.

Press the memory location

number, (M1,M2,M3), under

which the number is stored.

The number is displayed and

dialled automatically.

You can also dial a One-Touch

number when the handset is

down. Simply press the

memory location number

(M1,M2,M3). Your BT Decor

210 will automatically dial the

number using handsfree.

To insert a pause in

a memory number

Sometimes you may need to

enter a pause when storing a

number, e.g. with an

overseas number you may

need to enter a pause after

storing the international

code.

Press the REDIAL button in

the place where you want to

enter a pause.

When you dial the number

your BT Decor 210 will

automatically insert the

pause where you stored it.

Quickdial memories

You can store a further 10

telephone numbers in the

Quickdial memories. Please

note that the numbers can be

no longer than 18 digits long.

To store a number in

the Quickdial memory

Lift the handset.

Press the STORE button.

Enter the memory location

number between 0and 9,

under which you want to

store the number. The display

shows, e.g. Loc-8 if you want

to store in location 8.

Enter the telephone number

you want to store, including

the area code if applicable.

Press the STORE button.

You will hear a confirmation

tone and the display will show

SAVEd. Replace the handset.

BT Decor 210 ~ Issue 2 ~ 1st Edition ~ 27th August ’02 ~ 5597

123

456

789

BT Decor 210

Quickdial

Store

Handsfree

Redial

Vol

Liquid Crystal Display

Displays dialled numbers and

numbers stored in the memory.

Also displays call timer, and other

visible information.

One-Touch memory buttons

(M1,M2,M3)

Allows you to store and dial up to

three numbers at the touch of a

button. If pressed when handset

is down these are dialled

automatically using handsfree.

Secrecy/Music on hold button

Press to talk to someone in the

same room without your caller

hearing you. When pressed music

will be played to both you and

your caller.

Handsfree button

Allows you to hold a conversation

over the loudspeaker without

lifting the handset.

Volume button

Use to adjust the volume during

handsfree operation.

Quickdial button

Allows you to dial the 10 numbers

stored in the Quickdial memory

at the touch of two buttons.

Also used as a dial button when

using preparatory dialling.

Call indicator light

Flashes to indicate an incoming

call. Also flashes when storing

numbers and setting the ringer.

Store button

Use to store numbers in the

memory and to change the ringer

and pitch volume.

Recall button

For use with a switchboard/PBX

and BT Calling Features.

Please contact your switchboard

supplier for more information.

For more information on BT’s

Calling Features, please call

Freefone 0800 800152.

Redial/Pause button

Redials the last number called.

Also, press to enter a pause when

storing a number.

Handset hook

Keeps the handset in place when

the BT Decor 210 is wall

mounted. See pages 9 & 10 for

more information.

Revolve the handset catch on the

base unit. The handset will now

be able to rest on the hook when

wall-mounted.

To dial a number in

the Quickdial memory

Lift the handset and wait for

the dial tone.

Press the QUICKDIAL button.

Enter the memory location

number between 0and 9,

under which the number is

stored. The number is

displayed and dialled

automatically.

To delete stored

numbers

Lift the handset.

Press the STORE button.

Enter the memory location

number (0-9) or (M1,M2,M3)

under which you have stored

the number you wish to delete.

Press the STORE button. You

will hear a confirmation tone.

Replace the handset.

Alternatively, any existing

number stored in the

One-Touch or Quickdial

memories can be overwritten

by entering a new number

under the same memory

location. Simply follow the

instructions under the storing

numbers sections previously

shown.

Note

If any error occurs in the

storing mode you will hear

three short beeps, then the

product will return to talk

mode.

If you unplug your BT Decor 210

the numbers stored in the

memory will be saved. However,

the last number redial memory

will be lost.

Note

There is a Quickdial memory

label included on the reverse

side of your handset and a

One-Touch memory label on

the base unit. You can use

these labels to keep a record of

which memory location

number you have used for each

telephone number.

Note

You can mix manual and

memory dialling as required,

for example, you can dial the

area code 020 8304 from the

memory and then complete the

number manually.

General information Technical information

How many telephones can

you have?

All items of telephone

equipment have a Ringer

Equivalence Number (REN),

which is used to calculate the

number of items which may

be connected to any one

telephone line. Your

BT Decor 210 has a REN of 1.

A total REN of 4 is allowed, if

the total REN of 4 is

exceeded, the telephones may

not ring. With different

telephone types there is no

guarantee of ringing, even

when the REN is less than 4.

R&TTE Directive

Hereby, Suncorp

Technologies Ltd, declares

that this BT Decor 210 is in

compliance with the essential

requirements and other

relevant provisions of

Directive 1999/5/EC.

The Declaration of

Conformance for the

BT Decor 210 is published on

the website

http://www.suncorptech.com/bt

Switchboard

compatibility

This product is intended for

use within the UK for

connection to the public

telephone network and

compatible switchboards,

which support tone dialling

and time break recall. If in

doubt please consult your

service provider.

Wall

mounting

1. Locate lugs and mount into

holes under base unit as

shown.

2. Swing mount down to clip

into top hole.

3. Drill 2 holes, 25mm deep

using a 3mm drill, for the

screws using the template.

Ensure that you do not drill

into any hidden wiring or

pipes. Insert the wall plugs

provided and then insert a

screw into each hole. Leave

2-3mm between the head of

the screw and the wall.

4. Position the product onto

the screws.

5. Drop down to secure.

910

69mm

BT Decor 210 ~ Issue 2 ~ 1st Edition ~ 27th August ’02 ~ 5597

Offices worldwide

The telecommunications services described in

this publication are subject to availability and may be modified

from time to time. Services and equipment are provided subject

to British Telecommunications plc’s respective standard

conditions of contract. Nothing in this publication forms any part

of any contract.

Registered Office: 81 Newgate Street, London EC1A 7AJ.

Registered in England No. 1800000.

BT Decor 210 Issue 2 (8/03) 1

Printed in China.

Visit us at www.bt.com

This product is intended

for connection to analogue public switched telephone

networks and private switchboards

in the United Kingdom.

BT Decor 210

CORDED TELEPHONE

Guarantee

Your BT Decor 210 is

guaranteed for a period of

12 months from the date of

purchase.

Subject to the terms listed

below the guarantee will

provide for the repair of, or at

BT’s or its agent’s discretion

the option to replace the BT

Decor 210, or any component

thereof, which is identified as

faulty or below standard, or

fails as a result of inferior

workmanship or materials.

Products over 28 days old from

the date of purchase may be

replaced with a refurbished

or repaired product.

The conditions of this

guarantee are:

•The guarantee shall only

apply to defects that occur

within the 12 month

guarantee period.

•Proof of purchase is

provided.

•The equipment is returned

to the point of purchase.

•This guarantee does not

cover any faults or defects

caused by accidents, misuse,

fair wear and tear, neglect,

tampering with the

equipment, or any attempt

at adjustment or repair other

than by approved agents.

•This guarantee does not

affect your statutory rights.

Within the 12 month

guarantee period:

In the unlikely event of a

defect occurring, please return

the product, with the receipt,

to the place of purchase.

Outside of the 12 month

guarantee period:

If your product needs repair

after the guarantee period has

ended, the repair must meet

the approval requirements for

connection to the telephone

network. We recommend that

you contact BT’s approved

repair agent, TecLogic on

01672 564444 or a local

qualified repairer.

If you have to return

your BT Decor 210

Pack the unit securely,

preferably in the original

packaging. All parts must be

returned. We cannot take

responsibility for goods

damaged in transit.

BT Accessories and

Replacement Items

For a full range of

accessories and replacement

items for BT products please

call 0870 240 5522, or visit:

Product specificaties

Merk:	BT
Categorie:	telefoon met snoer
Model:	Decor 210

Heb je hulp nodig?

Als je hulp nodig hebt met BT Decor 210 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding telefoon met snoer BT

BT Decor 210 Handleiding

6 Oktober 2022

BT Decor 2200 - 2016 Handleiding

6 Oktober 2022

BT Converse 1400 Handleiding

6 Oktober 2022

BT Converse 1300 Handleiding

6 Oktober 2022

BT Decor 1300 Handleiding

6 Oktober 2022

BT Decor 1100 Handleiding

6 Oktober 2022

BT Converse 320 Handleiding

6 Oktober 2022

BT Converse 1200 Handleiding

6 Oktober 2022

BT Decor 2200 - 2012 Handleiding

6 Oktober 2022

BT Converse 2025 Handleiding

6 Oktober 2022

Handleiding telefoon met snoer

Nieuwste handleidingen voor telefoon met snoer

Mitel 5320 IP Handleiding

15 September 2023

Belgacom specifics 200 programatie Handleiding

8 September 2023

Belgacom Belgacom specifics 200 Handleiding

8 September 2023

Emporia T20AB telefoon met snoer Handleiding

18 Augustus 2023

Emporia KFT19 SOS - big-button telefoon met snoer Handleiding

18 Augustus 2023

Telekom Concept P 214 Handleiding

31 Juli 2023

Telekom Concept PX721 Handleiding

31 Juli 2023

Bigtel 40 Handleiding

27 Mei 2023

Telekom Concept PX722 Handleiding

31 Juli 2023

Primafoon Jan des Bouvrie Handleiding

21 April 2023