BT Converse 320 Handleiding
BT
telefoon met snoer
Converse 320
Lees hieronder de 📖 handleiding in het Nederlandse voor BT Converse 320 (11 pagina's) in de categorie telefoon met snoer. Deze handleiding was nuttig voor 54 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/11
Userfriendly
Guide
Converse 320
Reminder
Call Off
Reminder
Call On
Call
Minder
Call
Diversion
Call
Return
Installing
your
Converse 320
Situating your
Converse 320
Situate your Converse 320
close enough to a phone
socket so that the cables
will reach.
Do not stand it on carpets
or other similar surfaces
that generate fibres.
Your Converse 320 can be
wall-mounted. See ‘Wall-
mounting’.
Warning
Your Converse 320 is only
designed to be operated in a
normal office or domestic
environment. It should not
be used in bathrooms or
near water.
Check your
telephone wall socket
If you do not have a
modern-style socket, call
Freefone 0800 800 150.
Install the batteries
The display on your
Converse 320 is powered by
3 x AAA alkaline batteries
(available separately).
Make sure the phone is
not plugged in to the
phone socket. Open the
battery compartment
cover.
Insert batteries as shown.
Close the lid and replace
the compartment cover.
Plug your Converse 320
into the phone socket
Check the
dialling mode
Set the dialling mode
switch on the underside of
your Converse 320.
It should be set to TB.
This gives you Tone
dialling and ensures the
phone will work with all
modern digital exchanges.
If your phone does not
work, try setting the
dialling mode to P.
If you are connecting to a
switchboard, check with
your switchboard operator
or communications
manager which dialling
mode you need.
Set the time
Press the Store button.
Press the Clock button.
Enter the current time
using the 24-hour clock,
eg. 0 9 3 0 = 9.30am,
1 5 3 0 = 3.30pm.
Press the Store button.
The time is set and
displayed.
Your Converse 320
is now ready for
making and
receiving calls.
Using
your
Converse 320
Emergency calls
The emergency services can
be contacted by dialling 999
or 112.
If your Converse 320 is
connected to a switchboard
or PBX, you might have to
dial another number before
999 or 112 in order to get
an outside line.
On some switchboards,
you may not be able to get
an outside line if the power
fails. Check with your
switchboard operator or
communications manager.
To make a call
Lift the handset off the
base and dial the number
you want. The display
shows the number dialled.
At the end of your call,
replace the handset.
To use Handsfree
You can make and receive
calls without lifting the
handset by pressing the
Handsfree button.
To make a call:
Press the Handsfree button.
You hear the dialling tone.
Dial the number you want.
The display shows the
number dialled.
When your call is answered,
either lift the handset or
speak in ‘handsfree’ mode.
To receive a call:
When the phone rings,
press the Handsfree button
and speak to answer the call.
To make a call using
the Dial button
Without lifting the handset,
dial the number you want.
The display shows the
number to be dialled.
If you make a mistake, use
the 䊴Clear button to edit the
number you have entered.
The Next 䊳button inserts a
space when storing names
and numbers.
Press the Dial button.
The number shown in the
display is dialled in
‘handsfree’ mode.
Note
There are 3 ways to make a
call on your Converse 320:
by lifting the handset, using
the Handsfree button or by
using the Dial button.
For simplicity, only the
‘handsfree’ method is used
throughout the rest of this
guide. You may still use the
other methods if you wish.
Using a headset
Converse headsets (RJ11
jack) are available
separately from BT shops or
by calling Freefone 0800
800 150.
Plug the headset into the
socket marked HEADSET
on the underside of the
base.
To make a call, press the
Headset button.
Dial the phone number.
To end the call, press the
Headset button.
To use the
Secrecy button
You can prevent your
caller from hearing you
while you talk to someone
else close by.
During a call, press the
Secrecy button.
The red Secrecy light
comes on. Your caller
cannot hear you.
To resume your
conversation, press the
Secrecy button again.
The Secrecy light goes off.
To redial the
last number
You can redial a number
up to 32 digits long.
Press the Handsfree
button.
Press the Redial button.
The last number you
called is redialled.
To repeat-dial
a number
This feature works in
handset, handsfree and
headset modes.
If the number you call is
engaged, you can set your
Converse 320 to dial a
number repeatedly, saving
you from having to
continually press the
Redial button.
When you hear the
engaged tone, press the
Redial button.
Replace the handset (or
press the Handsfree or the
Headset button - depending
which mode you are in).
The display shows BUSY.
Ten seconds after the
handset is replaced, your
Converse 320 will switch to
‘handsfree’ mode and the
number is redialled.
If the number is still
engaged, your Converse
320 will wait for 45
seconds before repeating
the procedure. This will be
repeated every 45 seconds
up to a maximum of 15
times or until the call is
answered.
Note
Lifting the handset, pressing
the Handsfree button or the
Headset button again will
cancel the procedure.
Visual ring indicator
When you have an
incoming call, the Visual
ring indicator will flash in
time with the ringing
signal. Lift the handset to
answer the call.
Message Waiting
indicator
When you have Voice Mail
messages waiting, the
Message Waiting indicator
will flash at regular
constant intervals.
Note
This feature is for Meridian
switchboard users only.
To adjust the
ringer volume
Set the ringer volume
switch on the underside of
your Converse 320 to the
setting you want: HI, LOW
or OFF.
The call indicator light will
flash when you have an
incoming call with all 3
settings.
To adjust the
ringer tone
Set the ringer tone switch
on the underside of your
Converse 320 to the
setting you want: R1 for a
low pitch ring or R2 for a
high pitch ring.
To adjust the caller’s
speech volume
During a call, you can
make your caller’s voice
louder.
When using Handsfree:
Press the VOL + or VOL -
button to increase or
decrease the volume of
your caller’s voice.
When using the handset or
a headset:
Press the Amplify button.
Press the VOL + or VOL -
button to increase or
decrease the volume of
your caller’s voice.
To store a one-touch
number in the memory
Your Converse 320 can
store up to 20 telephone
numbers: 10 one-touch
numbers under the
memory buttons and 10
two-touch numbers, using
the memory buttons with
the Shift button.
Stored numbers can be up
to 21 digits long and
include the ✱and #
buttons and a pause.
Use the label to keep a
directory of each one-touch
and two-touch number.
One-touch memory buttons
6-10 (the bottom 5 buttons)
are pre-set with BT Select
Services numbers (see
‘Using Select Services’).
These can be overwritten if
you wish.
Press the Store button.
Press the Memory button
under which you want to
store the number.
Enter the phone number
you want to store.
Press the Store button.
The number is stored.
To change a stored number,
repeat the steps shown
above. The new number
will replace the existing
one-touch number.
To dial a
one-touch number
Press the Handsfree button
and press the memory
button you want.
The number is dialled.
To store a two-touch
number in the memory
Press the Store button.
Press the Shift button.
Press the Memory button
under which you want to
store the number.
Enter the phone number
you want to store.
Press the Store button.
The number is stored.
To dial a
two-touch number
Press the Handsfree button.
Press the Shift button.
Press the Memory button
you want.
The number is dialled.
To store a number
longer than 21 digits
Store the first 21 digits as
shown previously, then
repeat the steps to store
the remaining digits under
another Memory button.
To dial a stored
number of more than
21 digits
Press the Handsfree button.
Press the Memory button
which contains the first 21
digits.
Press the Memory
button which contains the
remaining digits.
The number is dialled
automatically.
P
T
TB
MODE
R1
R2
RINGER
HI
LOW
OFF
RINGER
VOLUME
IMPORTANT
Thank you for making the
right choice. You can
expect your Converse 320
to provide many years of
quality service. Please
read the instructions
carefully before use and
keep this user guide for
future reference.
Check that your
Converse 320 is
complete. When you
unpack you must have:
Converse 320 phone with
telephone line cable
attached
Screws and wall plugs for
wall mounting
Blank memory label
& Select Services
memory label
✓
✓
✓
At a glance
Headset
Used in conjunction
with a headset.
Secrecy button (and light)
Allows you to talk to someone
in the same room without
your caller being able to hear
the conversation.
Display
Shows 24-hour clock,
battery low indicator, phone
numbers, and ‘Error’ message if
you press a wrong button
Visual ring indicator
Flashes when you have an
incoming call. Message Waiting indicator
(for Meridian Switchboard users only)
Flashes when there is Voice Mail.
Handset park
Used when the phone is wall-mounted.
Hang the handset on the hook if you
need to leave the phone during a call.
Store
Lets you store numbers in the one-
touch and two-touch memories.
Dial
Dials the number shown on the
display.
Recall
For use with switchboard services
and some BT Select Services.
Redial
Redials the last number called.
Repeat-dials the redial number.
Clock
Used to set the clock and time the
duration of a call.
Calculator button
Switches the display to the calculator
function.
Phone number label
Lift the plastic cover to remove the
label and write your phone numbers.
Memory buttons
Press to dial a stored number.
Buttons M6 to M10 are pre-
programmed with Select Service
codes.
Volume
Adjusts the volume of your caller’s
voice.
Shift
Used to store and dial two-touch
memory numbers.
Next
Inserts a space in a number
when storing numbers in the
memory.
Clear
Used to edit numbers when
pre-dialling or when storing
numbers in the memory.
Handset clip
Holds the handset in place
when wall-mounted.
Voice amplification
Amplifies your caller’s voice
when using the handset or
headset.
Handsfree
Allows you to make and
receive calls without lifting
the handset, leaving your
hands free.
eg
eg
eg
eg
1
2
3
1
1
2
3
1
2
3
1
2
3
1
2
1
2
1
2
3
1
2
1
1
2
3
4
5
1
2
3
1
2
3
1
2
3
4
Reminder
Call Off
Reminder
Call On
Call
Minder
Call
Diversion
Call
Return
Installing
your
Converse 320
Situating your
Converse 320
Situate your Converse 320
close enough to a phone
socket so that the cables
will reach.
Do not stand it on carpets
or other similar surfaces
that generate fibres.
Your Converse 320 can be
wall-mounted. See ‘Wall-
mounting’.
Warning
Your Converse 320 is only
designed to be operated in a
normal office or domestic
environment. It should not
be used in bathrooms or
near water.
Check your
telephone wall socket
If you do not have a
modern-style socket, call
Freefone 0800 800 150.
Install the batteries
The display on your
Converse 320 is powered by
3 x AAA alkaline batteries
(available separately).
Make sure the phone is
not plugged in to the
phone socket. Open the
battery compartment
cover.
Insert batteries as shown.
Close the lid and replace
the compartment cover.
Plug your Converse 320
into the phone socket
Check the
dialling mode
Set the dialling mode
switch on the underside of
your Converse 320.
It should be set to TB.
This gives you Tone
dialling and ensures the
phone will work with all
modern digital exchanges.
If your phone does not
work, try setting the
dialling mode to P.
If you are connecting to a
switchboard, check with
your switchboard operator
or communications
manager which dialling
mode you need.
Set the time
Press the Store button.
Press the Clock button.
Enter the current time
using the 24-hour clock,
eg. 0 9 3 0 = 9.30am,
1 5 3 0 = 3.30pm.
Press the Store button.
The time is set and
displayed.
Your Converse 320
is now ready for
making and
receiving calls.
P
T
TB
MODE
1
2
3
1
1
2
3
4
Product specificaties
| Merk: | BT |
| Categorie: | telefoon met snoer |
| Model: | Converse 320 |
Heb je hulp nodig?
Als je hulp nodig hebt met BT Converse 320 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding telefoon met snoer BT
6 Oktober 2022
6 Oktober 2022
6 Oktober 2022
6 Oktober 2022
6 Oktober 2022
6 Oktober 2022
6 Oktober 2022
6 Oktober 2022
6 Oktober 2022
6 Oktober 2022
Handleiding telefoon met snoer
- telefoon met snoer Panasonic
- telefoon met snoer Brondi
- telefoon met snoer Fysic
- telefoon met snoer Motorola
- telefoon met snoer Medion
- telefoon met snoer Siemens
- telefoon met snoer Topcom
- telefoon met snoer Amplicom
- telefoon met snoer Amplicomms
- telefoon met snoer Audioline
- telefoon met snoer Belgacom
- telefoon met snoer Bigtel
- telefoon met snoer Emporia
- telefoon met snoer FHF
- telefoon met snoer Geemarc
- telefoon met snoer HUMANTECHNIK
- telefoon met snoer KPN
- telefoon met snoer Maxcom
- telefoon met snoer Mitel
- telefoon met snoer Premier
- telefoon met snoer Primafoon
- telefoon met snoer RTT
- telefoon met snoer Telekom
- telefoon met snoer Ucom
Nieuwste handleidingen voor telefoon met snoer
15 September 2023
8 September 2023
8 September 2023
18 Augustus 2023
Emporia KFT19 SOS - big-button telefoon met snoer Handleiding
18 Augustus 2023
31 Juli 2023
31 Juli 2023
27 Mei 2023
31 Juli 2023
21 April 2023