Brother XL-5070 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Brother XL-5070 (90 pagina's) in de categorie Naaimachine. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/90
English
885-448
XC6752-021
Printed in China
XL5050us_cover
Operation Manual
XC6752-021 XL5050 (NA03J061) Bk
1
IMPORTANT SAFETY INSTRUCTIONS
When using this machine, basic safety precautions, including the following, should always be taken:
Read all instructions before use.
DANGER - To reduce the risk of electric shock:
1. The machine should never be left unattended while plugged in. Always unplug the machine
from the electrical outlet immediately after using it and before cleaning it.
2. Always unplug the machine before you change the light bulb.
Replace the bulb with the same type and rated 15 watts.
WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons:
1. Do not allow this machine to be used as a toy. Close attention is necessary when the machine is
used by or near children.
2. Use this machine only for its intended use as described in this manual. Use only accessories
recommended by the manufacturer as contained in this manual.
3. Never operate this machine if it has a damaged cord or plug, if it is not working properly, if it has
been dropped or damaged, or dropped into water. Return the machine to the nearest authorized
dealer or service center for examination, repair, or electrical or mechanical adjustment.
4. Never operate the machine with any air openings blocked. Keep ventilation openings of the
machine and foot controller free from the accumulation of lint, dust, and loose cloth.
5. Never drop or insert any object into any opening.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being used or where oxygen is being
administered.
8. To disconnect the machine, set the main switch to the “{” position (which represents off), and
then remove the plug from the outlet.
9. Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.
10. Keep fingers away from all moving parts. Special care is required around the machine needle.
11. Always use the proper needle plate. The wrong plate can cause the needle to break.
12. Do not use bent needles.
13. Do not pull or push fabric while stitching. It may deflect the needle, causing it to break.
14. Switch the machine to the {” position to turn it off when making any adjustments in the needle
area, such as threading the needle, changing the needle, threading the bobbin, or changing the
presser foot.
15. Always unplug the machine from the electrical outlet when removing covers, lubricating, or
when making any other user servicing adjustments mentioned in the instruction manual.
16. This sewing machine is not intended for use by young children or infirm persons without
supervision.
17. Young children should be supervised to ensure that they do not play with this machine.
SAVE THESE INSTRUCTIONS
This machine is intended for household use.
XL5000us.book Page 1 Tuesday, November 11, 2003 9:25 AM


Product specificaties

Merk: Brother
Categorie: Naaimachine
Model: XL-5070

Heb je hulp nodig?

Als je hulp nodig hebt met Brother XL-5070 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Naaimachine Brother

Handleiding Naaimachine

Nieuwste handleidingen voor Naaimachine