Brother CE-5500 Handleiding

Brother Naaimachine CE-5500

Lees hieronder de 📖 handleiding in het Nederlandse voor Brother CE-5500 (14 pagina's) in de categorie Naaimachine. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/14

APPENDIX

UTILITY STITCHES

SEWING BASICS

KNOWING YOUR

SEWING MACHINE

Operation Manual

Product Code: 888-E30/E31/E37/E38/E39/V61/V63/V65/V67

Sewing Machine

Be sure to read this document before using the machine.

We recommend that you keep this document nearby for future reference.

Please read these safety instructions before at-

tempting to use the machine.

DANGER

- To reduce the risk of electric shock:

1Always unplug the machine from the

electrical outlet immediately after using, when

cleaning, when making any user servicing

adjustments mentioned in this manual, or if

you are leaving the machine unattended.

WARNING

- To reduce the risk of burns, fire, electric shock,

or injury to persons.

2Always unplug the machine from the

electrical outlet when making any

adjustments mentioned in the instruction

manual:

• To unplug the machine, switch the machine to

the symbol “O” position to turn it off, then

grasp the plug and pull it out of the electrical

outlet. Do not pull on the cord.

• Plug the machine directly into the electrical

outlet. Do not use an extension cord.

• Always unplug your machine if the power is

cut.

3 Electrical Hazards:

• This machine should be connected to an AC

power source within the range indicated on

the rating label. Do not connect it to a DC

power source or inverter. If you are not sure

what kind of power source you have, contact a

qualified electrician.

• This machine is approved for use in the

country of purchase only.

4Never operate this machine if it has a

damaged cord or plug, if it is not working

properly, if it has been dropped or damaged,

or water is spilled on the unit. Return the

machine to the nearest authorized dealer or

service center for examination, repair,

electrical or mechanical adjustment.

• While the machine is stored or in use if you

notice anything unusual, such as an odor,

heat, discoloration or deformation, stop using

the machine and immediately unplug the

power cord.

• When transporting the machine, be sure to

carry it by its handle. Lifting the machine by

any other part may damage the machine or

result in the machine falling, which could

cause injuries.

• When lifting the machine, be careful not to

make any sudden or careless movements,

otherwise you may injure your back or knees.

5Always keep your work area clear:

• Never operate the machine with any air

openings blocked. Keep ventilation openings

of the machine and foot control free from the

build up of lint, dust, and loose cloth.

• Do not store objects on the foot controller.

• Do not use extension cords. Plug the machine

directly into the electrical outlet.

• Never drop or insert any object into any opening.

• Do not operate where aerosol (spray) products

are being used or where oxygen is being

administered.

• Do not use the machine near a heat source,

such as a stove or iron; otherwise, the machine,

power cord or garment being sewn may ignite,

resulting in fire or an electric shock.

• Do not place this machine on an unstable surface,

such as an unsteady or slanted table, otherwise the

machine may fall, resulting in injuries.

6Special care is required when sewing:

• Always pay close attention to the needle. Do

not use bent or damaged needles.

• Keep fingers away from all moving parts.

Special care is required around the machine

needle.

• Switch the machine to the symbol “O”

position to turn it off when making any

adjustments in the needle area.

• Do not use a damaged or incorrect needle

plate, as it could cause the needle to break.

• Do not push or pull the fabric when sewing,

and follow careful instruction when freehand

stitching so that you do not deflect the needle

and cause it to break.

IMPORTANT SAFETY

INSTRUCTIONS

Product specificaties

Merk:	Brother
Categorie:	Naaimachine
Model:	CE-5500
Soort bediening:	Buttons, Rotary
Kleur van het product:	Wit
Gewicht:	6350 g
Breedte:	500.3 mm
Diepte:	251.4 mm
Hoogte:	381 mm
Beeldscherm:	LCD
Soort voeding:	Electrisch
Naaimachine functies:	Naaiwerk
Vrije arm:	Ja
Knoopsgat type:	1 stap
Steekpatronen aantal:	50
Automatische draadinsteker:	Ja
Naai snelheid:	850 steken per minuut
Hechtings lengte:	5 mm
Stikslebreedte:	7 mm
Meegeleverde draadschaar:	Ja