Brother SDX1200 Handleiding

Brother Niet gecategoriseerd SDX1200

Lees hieronder de 📖 handleiding in het Nederlandse voor Brother SDX1200 (111 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 57 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/111

Be sure to read this document before using the machine.

Operation Manual

Cutting Machine

Product Code: 893-Z05/Z09

IMPORTANT-PLEASE READ CAREFULLY:

This Terms of Use (“Agreement”) is a legal agreement between Brother Industries, Ltd. (“Company”) and you

that governs your use of any Software, installed on or made available by Company for use with sewing or craft

products (“Company Product”). The term of “Software” means any and all contents data, design data, data

format, firmware of Company Product, and PC application or mobile device application.

By using the Software and Company Product, you shall be deemed to have agreed to be bound by the terms of

this Agreement. If you do not agree to the terms of this Agreement, Company is unwilling to license the Software

and you are not allowed to use the Software. Amendments and supplements to this Agreement may be attached

to the Software.

An individual who accepts this Agreement on behalf of an entity represents to Company that he or she has the

legal right to enter into a binding legal agreement for that entity.

Terms and Conditions

1 Grant of License.

1.1 Subject to this Agreement, Company hereby grants you a personal, non-exclusive, non-

transferable and revocable license to use the Software only within the Company Product.

1.2 Your right to use of the Software is licensed and not sold, and solely for your use subject to this

Agreement. Company or its suppliers retains all right, title, and interest relating to Software,

including without limitation all intellectual property rights relating thereto.

2 Restrictions

2.1 Except as expressly set out in this Agreement or as required by any local law, you shall undertake:

2.1.1 not to disassemble, de-compile, reverse engineer, translate or otherwise attempt to learn

the source code of the Software(including the data or contents created by using the

Company Product or contents editing application software; hereinafter the same shall

apply in this Clause 2.);

2.1.2 not to create derivative works based on the whole or any part of the Software;

2.1.3 not to distribute, provide or make available the Software in any form, in whole or in part

to any person without prior written consent from Company;

2.1.4 not to copy the Software, except where such copying is incidental to normal use of the

Software with Company Product or where it is necessary for the purpose of back-up or

operational security;

2.1.5 not to transfer, rent, lease, sub-license, loan, translate, merge, adapt, vary, alter or modify,

the whole or any part of the Software nor permit the Software or any part of it to be

combined with, or become incorporated in, any other programs;

2.1.6 to include Company’s copyright notice and this Agreement on all entire and partial copies

of the Software; and

2.1.7 not to use the Software for any purpose (including, but not limited to, use with

unauthorized sewing/craft products or software) other than as provided under Clause 1 of

this Agreement.

3 No warranty

TO THE EXTENT PERMISSIBLE BY APPLICABLE LAW, THIS SOFTWARE IS PROVIDED TO YOU

"AS IS" WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, WHETHER ORAL OR

WRITTEN, EXPRESS OR IMPLIED. COMPANY SPECIFICALLY DISCLAIMS ANY IMPLIED

WARRANTIES OR CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, NON-

INFRINGEMENT AND/OR FITNESS FOR A PARTICULAR PURPOSE.

4 Limitation of liability

4.1 COMPANY SHALL NOT BE LIABLE TO YOU, ITS END-USERS OR ANY OTHER ENTITY FOR

ANY LOSS OF PROFITS OR INCOME OR SAVINGS, LOSS OF DATA, INTERRUPTION OF USE,

OR CONSEQUENTIAL, INCIDENTAL, SPECIAL, PUNITIVE OR INDIRECT DAMAGES

INCURRED BY SUCH PARTY (WHETHER IN AN ACTION IN CONTRACT OR TORT), EVEN IF

COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, ARISING OUT

OF OR RELATING TO THE SOFTWARE, SUPPORT SERVICE OR THIS AGREEMENT. THESE

LIMITATIONS SHALL APPLY TO THE MAXIMUM EXTENT ALLOWED BY APPLICABLE LAW

NOTWITHSTANDING ANY FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.

4.2 NOTWITHSTANDING THE CLAUSE 3 OR 4.1 HEREOF, THIS AGREEMENT DOES NOT

PURPORT TO EXCLUDE OR RESTRICT COMPANY'S LIABILITY FOR DEATH OR PERSONAL

INJURY RESULTING FROM NEGLIGENCE OR LIMIT THE STATUTORY RIGHTS OF A

CONSUMER.

5 Termination

5.1 Company shall have the right to terminate this Agreement at any time by providing a written

notice to you if you commit a material breach of any terms of this Agreement and fail to

immediately rectify such breach upon Company’s request.

5.2 Upon termination for any reason all rights granted to you under this Agreement shall cease, you

shall cease all activities authorized by this Agreement and you shall immediately delete or

remove the Software from all computer equipment in your possession and delete or destroy all

copies of the Software or its derivative works in your possession. In addition to the above, you

shall delete contents or design data created by you from the Company Product in your

possession.

6 Miscellaneous terms

6.1 You shall not export or re-export the Software or any copy or adaptation thereof in violation of

any applicable laws or regulations.

6.2 You shall not assign all or any part of this Agreement to any third party or any interest therein,

without prior written consent of Company. A change of control or reorganization of you

pursuant to a merger, sale of assets or stock shall be deemed to be an assignment under this

Agreement.

6.3 You agree that a breach of this Agreement will cause irreparable injury to Company for which

monetary damages would not be an adequate remedy and Company shall be entitled to seek

equitable relief in addition to any remedies it may have hereunder or at law without a bond,

other security, or proof of damages.

6.4 If any provisions of this Agreement shall be declared or determined as void or unenforceable by a

court of competent jurisdiction, such provisions shall be severable and independent from the

other provisions of this Agreement and the validity of the other provisions and of the entire

Agreement shall not be affected thereby.

6.5 This Agreement, together with all exhibits or other attachments referenced herein, constitutes the

entire agreement between the parties on the subject matter hereof, and supersedes all proposals,

oral and written, between the parties on this subject.

6.6 If Company fails to insist that you perform any of your obligations under this Agreement, or if

Company does not enforce any rights against you, or if Company delay in doing so, that will not

mean that Company have waived any rights against you and will not mean that you do not have

to comply with those obligations. If Company does waive a default by you, Company will only

do so in writing, and that will not mean that Company will automatically waive any later default

by you.

6.7 This Agreement is governed by the laws of Japan and Japanese Courts shall have exclusive

jurisdiction with respect to this Agreement except with regard to enforcement in which case the

jurisdiction of the Japanese Courts shall be non-exclusive.

6.8 The Company may update this Agreement in the below cases: A) When the changes are made for

the users’ benefit, or B) When the updates to the Agreement are adequate, reasonable, and not

contrary to the purposes of the Agreement. The Company will notify you and give you the

opportunity to review any material changes or updates to the Agreement, by posting a notice on

the Company’s website or a website specified by the Company at least 30 days before the

Agreement enters into effect. Once the updated Agreement is in effect, you will be bound by it if

you continue to use the Software.

Product specificaties

Merk:	Brother
Categorie:	Niet gecategoriseerd
Model:	SDX1200
Ingebouwd display:	Ja
Gewicht:	5800 g
Breedte:	531 mm
Diepte:	215 mm
Hoogte:	173 mm
Bluetooth:	Nee
Beeldschermdiagonaal:	5 "
USB-poort:	Ja
Ondersteund beeldformaat:	SVG
Mac-compatibiliteit:	Ja
Draadloze verbindingen:	Ja
Maximum scanresolutie:	600 x 600 DPI
Geschikt voor materialen:	Stof/Weefsel
Type product:	Elektronisch
Type beeldscherm:	LCD
Aantal lettertypes:	17
Snijbreedte (max):	- mm
Snijmat:	Ja
Media dikheid (max):	3 mm
Instelbare mesdiepte:	Ja
Instelbare mesdruk:	Ja