Brother QL-550 Handleiding

Brother Labelprinter QL-550

Lees hieronder de 📖 handleiding in het Nederlandse voor Brother QL-550 (2 pagina's) in de categorie Labelprinter. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

222

444

333

555

QUICK START GUIDE

English

[Getting Started]

www.brother.com

Printed in China

LB7065001

Introduction

Thank you for purchasing the QL-500/550.

Your new QL-500/550 is a label printer that connects to your personal computer, enabling you to quickly and easily print professional custom labels that

you have created on your personal computer using the label editing software provided.

This guide briefly describes the steps to start using your QL-500/550.

Refer to the User's Guide for more detailed information. The User's Guide can be found in the Manuals folder of the CD-ROM included with the QL-500/550.

Press the ON/OFF button to turn the

QL-500/550 off. Hold the DK Roll

compartment cover at the sides near

the front of the QL-500/550 and firmly

lift up to open the cover.

Place the spool into the

spool guides in the DK

Roll compartment.

Lift the label lever and then thread

the end of the DK Roll into the

slot immediately before the cutter.

Lower the label lever and then close

the DK Roll compartment cover.

Connect the AC power cord to the QL-500/550 and then plug the power supply cord

into a standard electrical outlet.

• Check that the electrical outlet is 220 ~ 240 V before inserting the plug.

• Remove the power supply cord from the electrical outlet after you have finished using the QL-500/550.

• Do not pull the cord when removing it from the electrical outlet. The wire in the cord may become damaged.

Check that the package contains the following before using your QL-500/550. If any item is missing or

damaged, please contact your Brother dealer.

Unpacking Your QL-500/550

The installation procedure differs depending on the operating system running on your personal computer. Refer to the

installation procedure for the appropriate operating system to install the software.

Installing the Software

Connecting to the Power Supply

Your QL-500/550 comes with a paper guide that collects strips of printed

labels that have not been cut off from the machine.

Attach the paper guide to the front of the QL-500/550 as shown in the

figure.

Remove the paper guide when printing more than 10 labels continuously and cutting

each label automatically (QL-550 only).

Installing the Paper Guide

Installing the DK Roll

When using Microsoft® Windows® 2000 Professional/XP (Home/Professional)

Start up the PC and put the CD-ROM into the CD-ROM

drive.

The QL-series Installer starts up and the P-touch Setup screen

is displayed.

• It may take a short time to display the screen.

• If it does not start up automatically, double click the “Setup.exe”

icon on the CD-ROM.

If you are happy with you settings, click [Next].

• It may take some time to display this screen.

• If it is not set correctly, click [Back] and set it again.

The Add-In settings screen is displayed.

Click [Next].

The installation of the driver is completed, the User Registration

screen is displayed.

Read the license agreement carefully. If you agree with the

terms and conditions of the license agreement, click [Yes]

to continue the installation.

The Customer Information screen is displayed.

Click [Next].

The Add shortcut screen is displayed.

To instaIl to a different folder click [Browse] and select another

folder.

USB cable

AC Power cord

CD-ROM

Starter roll

Front

Back

FEED button

CUT button

(QL-550 only)

LED lamp

ON/OFF button

CUT lever

(QL-500 only)

DK Roll compartment cover

AC Power cord

USB port

· Make sure that the

spool arms are

inserted firmly in the

spool guides on the

left and right.

· Insert the spool with

the DK Roll located

on the right hand

side of the QL-

500/550.

When unable to thread the end of the DK Roll

into the slot, thread it as far as possible, then

lower the label lever and close

the cover. Press the ON/OFF

button to turn the QL-500/550 on,

and then press the FEED

button to set the roll.

See the reverse side for an example of creating a label.

See the reverse side for an example of creating a label.See the reverse side for an example of creating a label.

Paper guide Cleaning Sheet

QL-500 QL-550

The QL-500/550 includes one starter

roll of DK Die-cut Standard Address

Labels (100 labels),

and one starter roll of DK Continuous

Durable Paper Tape 2-3/7" (25 feet).

Do not connect the QL-500/550 to your

personal computer until directed to do so

when installing the printer driver.

• Quick Start Guide

• DK Label & Tape Guide

• Warranty Card

333

Safety Precautions

• Do not expose the QL-500/550 to direct sunlight.

• Do not place or store the QL-500/550 near heaters or other hot appliances, in any location exposed to extremely high or low temperatures, high humidity or

dusty locations. Doing so could cause the machine to malfunction.

• Do not place any heavy objects containing water on top of the QL-500/550. If water or any foreign object enters the QL-500/550, immediately disconnect the

machine from the power and contact your Brother dealer.

• Do not insert any objects into or block the label output slot, or USB port.

• Use only the authorized power source for the QL-500/550.

• Do not disassemble the QL-500/550 or let it come into contact with water to avoid possible fire or electric shock. Do not remove the power cord from nor insert it

into the electrical outlet with wet hands. Doing so could cause an electrical shock.

• If the QL-500/550 will not be used for an extended period, remove the power cord from the electrical outlet.

• Always hold the plug when removing the power cord from or inserting it into the outlet. Do not pull on the cord when removing it from the electrical socket.

The wire in the cord may become damaged.

• You should position the QL-500/550 near an easily accessible, standard electrical socket.

• Do not connect the QL-500/550 to your personal computer until directed to do so when installing the printer driver.

• To prevent injury from a broken cutter blade and unit, follow these points: Close the top cover when

operating the cutter unit.

Do not apply excessive pressure to the cutter unit.

When the cutter blade has difficulty cutting the label, replace the existing cutter unit with a new one.

If the cutter blade should break off, unplug the power cord from the electrical outlet and remove the

cutter unit carefully with tweezers so you do not touch the blade.

• If a paper jam should occur due to a build up of adhesive on the paper guide surface, unplug the

power cord from the electrical outlet and wipe away the adhesive buildup on the paper guide surface

with a cloth dipped in ethanol or isopropyl (rubbing) alcohol. It is recommended that you clean the

paper guide when replacing the cutter unit.

• The average number of cuts is 5,000 or more depending on the operating environment. Difficulty

cutting, the inability to cut straight, or frequent paper jams may indicate that the cutter life is near the

end. Replace the cutter if these conditions occur.

• The last label on the DK roll is not attached to the core.

As a consequence, the last label may not be cut correctly, however this does not indicate a problem with the QL-500/550 printer.

Should there be a problem with the last label, remove any existing labels, insert another DK Roll and re-print.

Each roll contains a few more labels than stated.

Paper guide surface

Click “Standard

Installation”.

The preparation for

installing the software

starts and the License

Agreement screen is

displayed.

Each button selects the

following operations.

Standard Installation

P-touch Editor 4.2, P-touch Address Book 1.0, Printer Driver,

and User's Guide are all installed.

Custom Installation

P-touch Editor 4.2, P-touch Address Book 1.0, Printer Driver,

and User's Guide can be installed individually.

Show User's Guide

The Software User's Guide PDF manual can be viewed without

actually installing the QL-500/550 software.

Install Acrobat Reader

“Adobe® Acrobat® Reader®” can be installed so that you can

view the Software User's Guide (PDF Manual).

Adobe® Acrobat® Reader® 5.1 will be installed. If you have a

later version already installed you do not have to install it.

Click [Finish].

The software installation is

now complete. Connect

the printer to complete the

driver installation.

When the installation is

complete, you may be

prompted to reboot the

PC. To restart the PC,

select “Restart” and click

[Finish].

Select if you want to register your printer and then [Next].

• If you select “Yes, display the page”, you will be directed to

the online user registration page. After user registration,

continue with the installation (registration is recommended).

• If you select “No, do not display the page”, the installation will

continue.

Starting up the installed software.

• When starting P-touch Editor, click [Start] - [All Programs

(Programs)] - [Brother Ptouch] - [P-touch Editor 4.2].

• When starting P-touch Address Book, click [Start] - [All

Programs (Programs)] - [Brother P-touch] - [P-touch Address

Book 1.0].

Check the box for each

Microsoft® Office®

application that you

want to install the Add-

in for, then click [Next].

Make sure that you

have closed all

Microsoft® Office®

applications.

For details on Add-In

setting, See the

“Software User's Guide

(PDF Manual)”.

The Driver Setup (Brother P-touch) screen is displayed.

When using Mac OS® X

The Pre-Installation

Summary screen is

displayed.

Click [Next].

You can choose which

programs are installed.

Uncheck any programs that

you do not want to install.

The Choose Alias Folder

screen is displayed.

Check the content and click [Continue].

The License agreement screen is displayed.

When continuing the installation, click [Agree].

The Select a Destination screen is displayed.

Start up your Mac® and put the CD-ROM into the CD-ROM drive.

The QL-Series screen is displayed.

If it does not start up automatically, double click the QL-Series (CD-ROM)

icon.

112

Click [Install].

The screen in which the name and password of the administrator is

now displayed.

Input the “Name” and the “Password” of the administrator and

click [OK].

The screen to check the installation is displayed.

When continuing the installation, click [Continue Installation].

The installation starts.

Select the destination you

want to install, and click

[Continue].

The Easy Install screen is

displayed.

Select the drive where the

Mac OS® X is installed.

When the installation is completed and the message “The

software was successfully installed” is displayed, click [Restart].

Your Mac® will restart.

The installation of the printer driver is now complete.

Connect the USB cable to the USB port of the Mac®.

Press the ON/OFF button ( ) of the printer to turn on the power.

If you are using a USB hub and your Mac® has problems recognizing the

printer, try connecting the printer directly to your Mac®.

Double click the drive where Mac OS® X is installed, and click in

order [Applications]-[Utilities]-[Printer Setup Utility (Print Center)].

The Printer List screen is displayed.

When the Printer List screen is displayed, click [Add].

After rebooting, connect the USB

cable and power cord to the printer.

Remove the caution label before

connecting the USB cable.

Click [USB], “QL-500” or

“QL-550”, and [Add].

The screen returns to Printer

List screen.

Click [Add] (Add Printer).

Check that “QL-500” or “QL-550” is added, and close the Printer

List screen.

You can start using your Brother QL-500/550.

Double click the drive where P-touch Editor is installed, click in

order [Applications] - [P-touch Editor 3.2] and double click

P-touch Editor 3.2 icon. P-touch Editor will start.

Check the content and click [Next].

The Important Information screen is displayed.

Check the content and click [Next].

Click [Install].

The installation starts.

When the installation is complete, click [Done].

The software installation is now complete.

Next, install the printer driver.

Click [Continue].

The Important Information screen is displayed.

Click [Continue].

The Software License Agreement screen is displayed.

Select the location where you want to create the alias, and click

[Next].

See the reverse side for an example of creating a label.

See the reverse side for an example of creating a label.See the reverse side for an example of creating a label.

Click the [Mac OS X] folder and double click [P-touch Editor 3.2

Installer].

P-touch Editor 3.2 Installer starts up and the Introduction

screen is displayed.

Double click [QL-Series Driver.pkg] in [Mac OS X] folder.

The Driver Installer starts up and the Driver Setup

screen is displayed.

Enter your user name

and company name,

then click [Next].

The Choose the

Destination Location

screen is displayed.

Check the locations

where you want the

installer to add the

program shortcuts and

click [Next].

The Start Copying Files

screen is displayed.

Click [OK] on the Driver Setup (Brother P-touch) screen

to start the installation.

USB cable

USB port

Power cord slot

Power cord

USB cable

USB port

Power cord slot

Power cord

QUICK START GUIDE

[Creating Labels]

English

www.brother.com

Printed in China

LB7065001

Click on to print your label.

This section describes the general procedure for creating labels using your QL-500/550.

1 42 3

Shown above are a few of the type of labels you can create with the

QL-500/550.

Select an appropriate DK Roll for the label you have in mind, and insert the DK Roll in the QL-500/550.

Separate DK Roll purchase may be necessary.

Enter text directly using P-touch Editor, or copy text from a Microsoft® Office® application.

Use P-touch Editor's variety of editing functions to format and decorate your label.

Print the label from the QL-500/550.

Learn the basic workflow of P-touch Editor while creating a general label.

Creating an Address Label using P-touch Editor

Label Creation Outline

1 2 3 4 5

Click [Start] - [All Programs (or Programs)] - [Brother P-

touch] - [P-touch Editor 4.2]. Select "New Layout" in the

dialog box displayed, and then click .

Click on the Page Property box.

If the required Property box is not displayed in the

Property dock, click the corresponding button at the

left of the dock to open it.

Click in the Object dock to create a text box, and then

enter the text.

You can use the Text Property box to select options for

formatting the text.

Click in the Object dock.

The Frame Properties dialog box appears. Select a frame

and then click .

Click in the Print Property box.

If the required Property box is not displayed in

the Property dock, click the corresponding button

at the left of the dock to open it.

Peel the printed label from the backing and

apply the label.

Choose the type of label you want to create.

Start P-touch Editor and create a new label layout.

Select the label size. Enter the text. Add a frame to the label. Print the label.

Completed label

Select the DK Roll. Edit the label data. Print the label.

Copy text from Microsoft Word and create an address label.

Creating an Address Label using Microsoft Word Add-In

1 2 3 4 5

In MS Word, select the text to be imported, and then

click in the toolbar.

Text can also be copied from MS Excel and MS

Outlook.

The Add-in Preview Window appears. Verify the

contents. To make formatting changes click .

Changes to the layout of a label can also be made

using the Layout Style Function. For details refer to

IV step 2 below.

Click the text box of the text you wish to format to select it.

Use the Text Property box to change the text formatting.

Select the text box you wish to move, then drag and drop

to move it to the desired position.

Click in the Print Property box.

If the required Property box is not displayed in the Property dock,

click the corresponding button at the left of the dock to open it.

Peel the printed label from the backing and

apply the label.

Copy text. Verify the copied data.

Format the text. Position the text box. Print the label.

Completed label

Peel the printed label from the backing and

apply the label.

Completed label

Create a banner using DK Continuous Durable Paper Tape.

Creating a Banner Label

1 2 3 4 5

Insert the "DK Continuous Durable Paper Tape 62 mm"

into the QL-500/550.

Start P-touch Editor and create a new label layout.

Use the tape length spin buttons in the Page Property box

to set the banner length.

Click in the Object dock to create a text box, and then

enter the text.

Click in the Object dock.

The Clip Art Gallery dialog box appears. Select a piece

of clip art and then click .

Click in the Print Property box.

If the required Property box is not displayed in

the Property dock, click the corresponding

button at the left of the dock to open it.

Peel the printed label from the backing and

apply the label.

Insert the DK Roll. Select the Tape Length. Enter the text.Add clip art to the banner. Print the label.

Completed label

Create a name badge label quickly and easily using the Auto Format Wizard.

Creating a Name Badge Label using Auto Format Wizard function

1 2 3 4 5

Start P-touch Editor, select "Use the Auto Format Wizard"

in the dialog box displayed, and then click .

This label cannot be created using the Starter Roll(s) provided with the

QL-500/550.

The Auto Format Wizard dialog box appears. Select

a category "For Visitor Name Badges" and then click

A list of templates for the selected category appears.

Select a template and then click .

Change the text in the template's Input field.

Use the and buttons to move between

Input fields.

Click when finished.

Check the "Print Immediately After Creating the

Layout" checkbox, and then click .

Peel the printed label from the backing and

apply the label.

Start the Auto Format Wizard. Select a category. Select a template. Enter the text. Print the label.

Completed label

Create an address label using data from Microsoft Outlook, taking advantage of the Layout Style Function.

Creating an Address Label using Microsoft Outlook Add-In

1 2 3 4 5

The Add-in Preview Window appears. Verify the contents.

To change the style, click .

In Microsoftted, and then click in the Toolbar. The Add-In Preview Window appears. Verify the Layout.

If further editing is required, enter the P-touch Editor

by clicking . Refer to step 2 of

III

Click to print your label.

If the contact does not have a Job Title, there

may be a blank space before the address. Use

P-touch Editor to change any formatting.

Peel the printed label from the backing and

apply the label.

Select a Layout style.

Verify the copied data.

Copy the text from MS Outlook - Contacts.

Verify the Layout. Print the label.

Completed label

• Enter text in P-touch Editor. • Copy text from Microsoft® Office®.

The Apply Layout Style Window appears.

Select the "Standard_Address_02" layout and click

DK Continuous

Durable Paper

Tape 62 mm

Product specificaties

Merk:	Brother
Categorie:	Labelprinter
Model:	QL-550
Kleur van het product:	Blue, Silver
Printsnelheid:	50 lpm
Standaard interfaces:	USB
Afmetingen (B x D x H):	142.5 x 192.5 x 150 mm
Printsnelheid (metrisch):	90 mm/sec
Soort tape:	DK