Brother PT-M95 Handleiding

Brother Labelprinter PT-M95

Lees hieronder de 📖 handleiding in het Nederlandse voor Brother PT-M95 (9 pagina's) in de categorie Labelprinter. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/9

User’s Guide

M95

M95M95M95

English

User’s Guide

M95

M95M95M95

English

Introduction

Read this manual carefully before starting and keep it in a

handy place for future reference.

Safety Precautions

Warning

Follow these guidelines to avoid the risk of fire, burn,

injury, electric shock, damage, overheating, abnormal

odours or smoking.

• Always use the specified voltage and the suggested AC adapter

(AD-24ES) for this machine to prevent any damage or failure.

• Unplug the adapter cord immediately and stop using the P-touch

during an electrical storm.

• Do not use the machine/AC adapter in places of high humidity such

as bathrooms.

• Do not overload the adapter cord.

• Do not place heavy objects on, or damage the adapter cord or plug.

Do not forcibly bend or pull the adapter cord. When disconnecting

the adapter cord from the power outlet, always hold the plug.

• Make sure that the plug is fully inserted in the power outlet. Do not

use an outlet that is loose.

• Do not swallow the cutter stopper.

• Do not get the machine/AC adapter/adapter plug wet, such as by

handling them with wet hands or spilling liquids on to them.

• Do not disassemble or modify the P-touch/AC adapter/batteries.

• Do not use metallic objects, such as tweezers or a metallic pen,

when changing the batteries.

• Do not throw the batteries into fire or expose to heat.

• Disconnect the AC adapter, remove batteries immediately and stop

using the machine if you notice abnormal odour, heat,

discolouration, deformation or anything unusual while using or

storing it.

Caution

Follow these guidelines to avoid personal injury,

battery leakage, burn and heat.

• Do not touch the cutter blade near the print head.

• Remove the batteries and disconnect the AC adapter if you do not

intend to use the P-touch for an extended period of time.

• Do not use old and new batteries together or mix alkaline batteries

with other type batteries, or set the positive and negative end in the

wrong position.

• Do not drop or hit the P-touch/AC adapter.

• Do not press hard on the LCD display.

• Make sure you do not trap your fingers when closing the cassette

cover.

D01CJ0001

General Precautions

• Depending on the location, material, and environmental conditions,

the label may unpeel or become irremovable, the colour of the label

may change or be transferred to other objects. Before applying the

label, check the environmental condition and the material.

• Do not use the P-touch in any way or for any purpose not described

in this guide. Doing so may result in accidents or damage to the

machine.

• Use only Brother M tapes with this machine. Do not use tapes that

do not have the mark.

• Only use a soft, dry cloth to clean the machine; never use alcohol

or other organic solvents.

• Use a cotton swab to clean the print head; never touch the print

head.

• Do not put any foreign objects into the tape exit slot or AC adapter

connector, etc.

• Do not place the P-touch/battery/adapter in direct sunlight or rain,

near heaters or other hot appliances, in any location exposed to

extremely high or low temperatures (e.g. on the dashboard or in the

back of your car), high humidity, or dusty locations.

• Do not apply excessive pressure to the cutter lever.

• Do not try to print if the cassette is empty; it will damage the print

head.

• Do not pull the tape while printing or feeding; it will damage the tape

and machine.

• When power is disconnected for more than three minutes, all texts

settings and any text files stored in the memory will be cleared.

• Any data stored in memory will be lost due to failure or repair of the

P-touch, or if the battery expires and no adapter is connected.

• A protective clear plastic sticker is placed over the display during

manufacturing and shipping. This sticker should be removed prior

to use.

Installing the Power Supply and Tape Cassette

Using the Optional AC Adapter

1Insert the small plug on the adapter cord into the AC adapter socket at the top of the machine.

2Insert the power plug into the nearest standard electrical socket.

NOTE

For the memory backup feature, we recommend using AAA alkaline batteries (LR03) together when using the AC adapter.

Remove the cassette cover by pressing the

highlighted area.

If you already installed a tape cassette, remove it by

pulling it straight up. If you already installed batteries,

remove them as well.

• Make sure the power is turned off when replacing

batteries or tape cassettes.

Insert a tape cassette, making sure it snaps

into place.

• Make sure the end of the tape feeds under the tape

guide.

• Use only Brother M tapes with this P-touch labelling

machine.

Insert four new AAA alkaline batteries

(LR03), making sure their positive and

negative ends point in the correct directions.

• Always replace all four batteries at the same time

using brand new ones.

• For details of the optional AC adapter (AD-24ES),

see “Using the Optional AC Adapter”.

Insert the two hooks at the bottom of the

cassette cover into the slots on the machine

(1), and then close the cover securely until

it snaps into place (2).

After you have installed the tape, feed the tape (see

“Feeding”) once, and then press the tape cutter lever

to cut the tape.

Print head

Tape cutter lever

Cassette

cover

2Cutter

blade

Tape

exit slot

Tape guide

End of tape

AC adapter

socket

Product specificaties

Merk:	Brother
Categorie:	Labelprinter
Model:	PT-M95
Kleur van het product:	Wit
Gewicht:	250 g
Breedte:	111 mm
Diepte:	150 mm
Hoogte:	61 mm
Gewicht verpakking:	650 g
Breedte verpakking:	204 mm
Diepte verpakking:	193 mm
Hoogte verpakking:	86 mm
Gebruikershandleiding:	Ja
Materiaal behuizing:	Kunststof
Kleur:	Nee
Type verpakking:	Doos
Automatisch uitschakelen:	Ja
Beeldscherm:	LCD
Ethernet LAN:	Nee
Garantiekaart:	Ja
Inclusief AC-adapter:	Ja
Ondersteund aantal accu's/batterijen:	4
Tekstregels:	1 regels
Maximale resolutie:	203 x 203 DPI
Printtechnologie:	Thermo transfer
Maximale printlengte:	0.3 m
Toetsenbordindeling:	QWERTY
Aantal karakters beeldscherm:	12
Toetsenbord:	Ja
Maximale print breedte:	- mm
Printsnelheid (metrisch):	7.5 mm/sec
Maximale print hoogte:	8 mm
Wifi:	Nee
Batterijtechnologie:	Alkaline
Type batterij:	AAA
Code geharmoniseerd systeem (HS):	84433210
Tapebreedte (metrisch):	12 mm
Afdrukvoorbeeld:	Ja
Geheugen capaciteit:	240 tekens
Aantal letterstijlen:	8
Onderstrepen:	Ja
Verticaal printen:	Ja
Minimale printlengte:	30 mm
Aantal etiketformaten:	27