Brother P-touch PT-D202 Handleiding

Brother Niet gecategoriseerd P-touch PT-D202

Lees hieronder de 📖 handleiding in het Nederlandse voor Brother P-touch PT-D202 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 6 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
User’s Guide
Thank you for purchasing a Brother P-touch Home label
maker! With your new P-touch Home label maker, you
can create labels to organize and personalize items just
the way you want them around your home. Select from
the many frames, character sizes and styles to design
beautiful custom labels. In addition, the variety of tape
cartridges available allows you to print labels with
different widths and exciting colors.
For a complete list of tapes compatible with your label
maker, visit us at: www.brother.com.
Please read this guide, including all Precautions, before
using this label maker. After reading this guide, keep it in
a safe place.
D01EL0001
Follow these guidelines to avoid the risk of fire, burns, injury, electric
shocks, rupture, overheating, abnormal odours or smoke.
Always use the specified voltage and the suggested AC Adapter (AD-24) for the label
maker to prevent any damage or failure.
Do not touch the label maker or AC Adapter during a thunderstorm.
Do not use the label maker or AC Adapter in places of high humidity such as
bathrooms.
Do not overload the power cord.
Do not place heavy objects on, or damage the power cord or plug. Do not forcibly
bend or pull the power cord. Always hold the AC Adapter when disconnecting from
the power outlet.
Make sure that the plug is fully inserted to the power outlet. Do not use an outlet that
is loose.
Do not allow the label maker, AC Adapter, power plug, or batteries to get wet, for
example, by handling them with wet hands or spilling beverages on to them.
Since loss of eyesight may result when leaked fluid from batteries gets into your eyes,
immediately rinse your eyes with a large amount of clean water, and then seek
medical attention.
Do not disassemble or modify the label maker, AC Adapter, or batteries.
Do not allow a metal object to contact both the plus and minus ends of a battery.
Do not use sharp objects, such as tweezers or a metallic pen, to change the batteries.
Do not throw the batteries into fire or expose to heat.
Disconnect the AC Adapter and remove batteries immediately and stop using the
label maker if you notice abnormal odor, heat, discoloration, deformation or
anything unusual while using or storing it.
Do not use a damaged or leaking battery as the fluid may get on your hands.
Do not use a deformed or leaking battery or one whose label is damaged. There is a
possibility of generating heat.
Follow these guidelines to avoid personal injury, liquid leakage,
burns or heat.
When the label maker is not being used, store it out of the reach of children. In
addition, do not allow children to put the label maker parts or labels in their mouths.
If any object has been swallowed, seek medical attention.
Do not touch metal parts around the Print Head immediately after printing.
Do not touch the Cutter Blade.
If leaked fluid from batteries gets on your skin or clothes, immediately rinse them with
clean water.
Remove the batteries and disconnect the AC Adapter if you do not intend to use the
label maker.
Do not use a battery other than that specified. Do not use combinations of old and
new batteries or combinations of different types, different charging levels, different
manufacturers or different models. Do not insert a battery with its plus and minus
ends reversed.
Do not drop or hit the label maker or AC Adapter.
Do not press on the LCD display.
Do not put your finger inside the label maker when you close the Cassette Cover.
Before using Ni-MH rechargeable batteries, carefully read the instructions for the
batteries and battery charger, and be sure to use them correctly.
When using Ni-MH rechargeable batteries, charge the batteries with a specialized
battery charger before using the batteries.
Depending on the location, material, and environmental conditions, the label may
unpeel or become irremovable, the color of the label may change or be transferred
to other objects. Before applying the label, check the environmental conditions and
the material.
Do not use the label maker in any way or for any purpose not described in this guide.
Doing so may result in accidents or damage the label maker.
Use only genuine Brother TZe tapes with the label maker. Do not use tapes that do
not have the mark.
Only use a soft, dry cloth to clean the label maker; never use alcohol or other organic
solvents.
Use a soft wipe to clean the Print Head; never touch the Print Head.
Do not put any foreign objects into the tape exit slot or AC Adapter connector or
battery compartment, etc.
Do not place the label maker, batteries, or AC Adapter in direct sunlight or rain, near
heaters or other hot appliances, in any location exposed to extremely high or low
temperatures (for example, on the dashboard or in the back of your car) or high
humidity, or in dusty locations.
Do not apply excessive pressure to the Tape Cutter Lever.
Do not try to print if the Tape Cassette is empty; it will damage the Print Head.
Do not pull the tape while printing or feeding; it will damage the tape and the label
maker.
Any data stored in memory will be lost due to failure or repair of the label maker, or if
the battery expires.
The label maker is not equipped with a charging feature for rechargeable batteries.
The printed text may differ from the text that appears in the LCD.
The length of the printed label may differ from the displayed label length.
A protective clear plastic sticker it placed over the display during manufacturing and
shipping. This sticker should be removed prior to use.
When power is disconnected for more than three minutes, all text, format settings and
any text files stored in the memory will be cleared.
Safety Precautions
Indicates a potentially hazardous
situation which, if not avoided,
could result in death or serious
injuries.
WARNING
Indicates a potentially hazardous
situation which, if not avoided, may
result in minor or moderate injuries.
General Precautions
CAUTION
Federal Communications Commission (FCC)
Supplier’s Declaration of Conformity (USA)
Responsible Party: Brother International Corporation
200 Crossing Boulevard
Bridgewater, NJ 08807-0911, U.S.A.
TEL: (908) 704-1700
Product Name: Label Maker
Model Number: PT-D202
This equipment complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This equipment may not cause
harmful interference, and (2) this equipment must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Important
Changes or modifications not expressly approved by Brother Industries, Ltd.
could void the user's authority to operate the equipment.
GETTING STARTED
Installing Power Supply and Tape Cassette
With the LCD facing down, open the
Cassette Cover by pressing the grooved tab
and pushing in the direction of the arrow, as
illustrated.
If a Tape Cassette is already installed, remove
it by pulling it straight up.
When replacing batteries or Tape
Cassettes, make sure the power is
turned off.
This label maker requires six (6) AAA
alkaline batteries or six (6) fully charged
Ni-MH batteries, not included.
Insert the Tape Cassette following the
drawing marked inside the case. Gently
press the Tape Cassette into the label
maker until it locks into place.
Make sure your Tape Cassette is marked .
Use only tape widths of 0.13" (3.5 mm),
0.23" (6 mm), 0.35" (9 mm), or 0.47" (12 mm)
If your TZe is packaged with protective plastic,
be sure to remove the plastic before inserting
the Tape Cassette.
Use only Brother TZe tapes with this machine.
Make sure that the End of the Tape feeds under
the Tape Guide.
Close the Cassette Cover and gently press
until it locks into place.
NOTE
If you prefer to use the optional AC Adapter
(AD-24; not included) instead of using batteries:
1.
Insert the Power Adapter cord into the AC
Adapter Jack on the side of the label maker.
2. Insert the Power Adapter into an AC
electrical outlet.
For backup memory, we recommend using both
batteries AND the optional AC Adapter, in the event
that one or the other power method fails.
1
1Print
Head
Tape
Cutter
Lever
Cassette
Cover
2
Toothed
Wheel
Cutter’s
Edge
End of
Tape
Tape Exit Slot
Tape Guide
Tape
Cassette
3
AC Adapter
Jack
NOTE
The LCD displays one row of 15 characters;
however, there is a maximum of 80 characters and
spaces for a text label, and 50 characters and
spaces if using templates.
• When selecting the settings, press to
return to the default item.
*1Visit us at support.brother.com for the latest
information about the recommended batteries.
LCD and Keyboard
1. Font Size
2. Cursor
3. Underline/Frame
4. Width
5. Style
6. Caps
7. Label Length
If a specific label length has
been selected, also
appears.
8. Cursor key : Right (Use with
Shift key to go to end of the
text.)
9. OK key
10. Escape key
11. Cursor key : Left (Use with
Shift key to go to top of the
text.)
12. Power key
13. Menu key
14. Font key
15. Character key
16. Tab key
17. Caps key
18. Shift key
19. File key
20. Print key
21. Preview key
22. Frame key
23. Symbol key
24. Template key
25. Backspace key
26. Enter key
27. Accent key
28. Space key
Pressing the Preview key (21) displays a
preview of the label, and may differ from the
actual label when printed.
Label length shown on the LCD may differ
slightly from the actual length when printed.
Specifications
Dimensions:
(W x D x H)
Approx. 6.49" × 6.10" × 2.67"
(Approx. 165 (W) × 155 (D) ×
68 (H) mm)
Weight: Approx. 1.08 lb. (Approx. 490 g)
(without batteries and Tape
Cassette)
Power supply: Six AAA alkaline batteries (LR03)
Six AAA Ni-MH batteries (HR03)*
1
Optional AC Adapter (AD-24)
Tape Cassette: Brother TZe tape (width)
0.13" (3.5 mm), 0.23" (6 mm),
0.35" (9 mm), 0.47" (12 mm)
For FAQs, Troubleshooting, and manuals, visit:
support.brother.com.
1Turn your label maker on.
Supply power by using six AAA batteries or the
optional AC Adapter (AD-24), and then
press .
2Set the language.
The default setting is [English].
3Set the unit of measurement.
The default setting is [inch].
NOTE
The label maker automatically turns off if no keys
are pressed within five minutes.
• To cancel any operation, press .
• After pressing , [Accepted] appears for
approximately one second.
Initial Settings
/ [Language]
/ (Select a language) .
/ [Unit]
/ [inch/mm] .
Over time, the Cutter Blade may become blunt
from repetitive use. If the Cutter does not cut tape
cleanly, replace the Cutter Unit. Contact your
local authorized Brother reseller and order item
TC-4, the Cutter Unit.
Replacing the Cutter Unit
1. Remove the two sections of the Cutter Unit
(green) in the direction of the arrows as
illustrated below.
2. Install a new Cutter Unit. Push it in gently until
it locks into place.
Accessories
Tape
Cassettes:
Visit www.brother-usa.com for a
list of available Brother P-touch
tapes
AC Adapter: AD-24
Cutter Unit: TC-4 (replacement)
WARNING
Do not touch the cutter blade directly with your
fingers.
BASIC USAGE
You can enter a maximum of 80 characters and
spaces for a text label, and 50 characters and
spaces if using templates.
To cancel any operation, press .
Switching Upper Case/Lower Case
Upper case Lower case
(ON) (OFF)
Creating Two-Line Tapes
Move the cursor to where you want to start the
next line and press . Use either 0.35" (9 mm)
or 0.47" (12 mm) tape for two-line printing.
NOTE
The return symbol ( ) appears when you press
the Enter key .
Entering Tabs
You can also set a tab by pressing .
The tab symbol appears when you insert a
tab in the text.
Changing Tab Length
Entering Accented Characters
Refer to the Accented Characters table in this
guide.
The order of accented characters varies based
on the language you selected.
Changing Label Length
NOTE
After printing a label, cut along the printed dots (:)
with scissors so the label length matches what is
shown on the LCD.
The lock symbol appears when you set a
specific label length.
To return to the default length (automatic, based
on text length), press , and [Auto]
appears on the LCD.
Clearing Text and Settings
To delete individual letters and spaces, press
.
To delete all text:
To delete all text and settings :
Cursor Keys
To move to the end of your text:
To move to the beginning of your text:
Entering Text
2
Line 1 Label image
Line 2
/ [Tab]
/ [Tab Length]
/ [Auto/0.0"-4.0" (0-100 mm)]
Caps
Caps
- / /
/ [Label Length]
/ [Auto/1.2"-12.0" (30-
300 mm)]
+ / [Text Only]
+ / [Text&Format]
+
+
Setting Margins
You can also access the Margin menu by
pressing .
[ ]Full] / [Half] / [Narrow
Use one of these options to customize margin
length before and after your text.
The printed dots (:) indicate the end of the label.
Cut along the printed dots (:) with scissors.
NOTE
To print more than 1 copy of a label with minimum
margin, set the margin to [Narrow].
[Chain Print] (tape-saving option)
Use this option to print multiple different labels
with narrow margins. This option saves tape.
1.
Enter your text.
2.
Press . [
Copies:
] appears on the LCD.
3.
Press the number keys to enter the number of
copies you want of this text.
4.
Press to start printing.
5.
When [
OK to Feed?
] appears on the LCD,
press to change the text.
6.
Clear the text, enter the text you want on the
next label, and then press .
7.
After your last label prints, when [
OK to
Feed?
] appears on the LCD, press .
NOTE
When you use [Chain Print], feed the tape
before pressing the Tape Cutter Lever
( + ), otherwise part of the text may be
cut off.
Do not pull the tape, as this may damage the
Tape Cassette.
You can save up to 30 labels and recall them for
printing at a later date. A maximum
of 80 characters can be saved per file and
a maximum of 2400 characters can be saved
in total memory. You can also edit and overwrite
the stored labels.
Saving a new file
Printing a saved file
Opening a saved file
You can also access the File menu by
pressing .
NOTE
When saving a file, if you reuse a number that is
already assigned to another file, [Overwrite?]
appears on the LCD. To overwrite the previously
saved file, press . To cancel without saving,
press .
Printing Labels (cont)
/ [Margin]
/
[
Full/Half/Narrow/Chain Print
]
LCD Printout
Full
Half
Narrow
2.7"
ABC
1" 1"
1.6"
ABC
0.47" 0.47"
1.0"
ABC
0.16"0.16"
Saving Label Files
(Enter text) / [Save]
/
/ [Print]
/
[Copies: ] / -
/ [Open]
/
Preview
Pressing the Preview key displays a
preview of the label, and may differ from the
actual label when printed.
If the LCD cannot display all the text at once,
press / to display the hidden text.
Press , or to exit Preview
mode.
Feeding (Tape Feed)
This function feeds approximately 1" (25 mm)
of blank tape.
Do not pull the tape, as this may damage the
Tape Cassette.
Printing
If you need only one copy of the label, press
after you press .
You can print up to nine copies of each label.
Press a number key to specify the number of
copies you wish to print.
DO NOT touch the Tape Cutter Lever while the
message [Printing...] or [Feeding...]
appears on the LCD.
When printing stops, push the Tape Cutter
Lever.
To remove label backing, fold the label
lengthwise (with the text facing inward), to
expose the inside edges that run down the
center of the tape backing. Peel and apply.
Using Print Options
[
Numbering
]
You can print a series of up to nine labels using
auto-numbering. Use this feature to
automatically increase a selected number by 1
after each one is printed.
Ex: Print copies of a label containing a serial
number (0123, 0124, and 0125)
Select the highest number you wish to print
when setting the number.
[
Mirror
]
Ex: To Mirror Print "J.SMITH", follow the
instructions below after entering
"J.SMITH".
Use clear tape when using this function, so the
labels can be read correctly from the opposite
side when attached on glass, windows, or
other transparent surfaces.
Printing Labels
+
[Copies: ] / -
+
(Enter numbers) move the cursor to the
number you wish to increment using /
+
/ [Numbering]
/
(Enter text or characters) +
/ [Mirror] [Mirror
Print?]
USING TEMPLATES
Use Home Label templates to create polished
labels by selecting one of our predesigned formats.
Refer to the Home Label Templates table in this
guide.
Ex:
Use Deco Mode templates to add visual texture to
your labels. Refer to the Deco Mode Formats
table in this guide.
Ex:
NOTE
Depending on the format you have selected, the
entire contents of your text may not be printed.
For example, if you selected a fixed Label Length
and the text is too long, an error message [Text
Limit!] will appear.
Templates cannot be edited.
Only the highlighted symbols, shaded in the
Basic Symbols/Pictograph Symbols table in
this guide, can be used in Deco Mode.
To clear all text, press and . When
[Clear?] appears, press to clear. Press
to cancel.
When you access templates, your most recent
label created with a template opens
automatically.
Press to return to the previous step.
To exit a template and return to the text entry
screen, do one of following:
a) Press .
b) Press / to select [Cancel], and
then press when "Print" appears on the
LCD.
Templates can be used ONLY with 0.47"
(12 mm) Tape Cassettes.
Maximum label length is 7.8" (200 mm) when
using templates.
When you select [Auto] for [Label Length],
the label length is automatically adjusted. The
text prints once.
Press to return to the [Auto] setting for
[Label Length].
3
Home Label
[Select Layout] /
Enter text: FRESH SQUEEZED
Enter text: 12/31/19
/ [Auto/
1.2" - 7.8" (30 -200mm)]
[Print]
Deco Mode
/ [Deco mode]
[Select Layout] /
[Input Text]
Enter text: ABCDEF
/ [Auto/1.2"-7.8"(30-
200mm)] [Print]
 Error message What to do when...
Troubleshooting
Message Cause/Remedy
Low
Battery!
The batteries are weak.
If using AAA alkaline batteries: Replace them
with new ones.
If using Ni-MH batteries, charge them fully.
Battery
Dead Replace the batteries.
Invalid!
There is no text above the cursor when you
selected [Numbering].
• Invalid character is selected for [Numbering].
Invalid number is selected for [Tab Length]
or [Label Length].
An invalid value was entered as the label
length while using the Deco Mode or Home
Label function.
No Text!
You tried to print a text file when there is no
data stored in the memory.
is pressed when no text is entered.
You tried to select [Numbering Mirror], [ ],
or Text Preview when no text is entered.
or was pressed when no text was
entered while using the Deco Mode or Home
Label function.
Line Limit!
You tried to enter a 3rd line by pressing .
You tried to print or preview two lines of text
while 0.13" (3.5 mm) or 0.23" (6 mm) tape is
installed. Install tape of a larger size.
No
Cassette! There is no Tape Cassette installed.
Cutter
Error
The Tape Cutter Lever was pressed in the
middle of the printing process.
Text Full!
The maximum number of characters
(80 characters, 50 characters for Deco Mode or
Home Label function) have already been
entered.
Text Limit!
If you selected Deco Mode or Home Label
templates, try to reduce the text. The maximum
number of characters for these templates is
50 characters.
In general:
If the number of characters exceeds the label
length, reduce the text or select [Auto] as the
label length.
No Frame OK?
Printing on 0.13" (3.5 mm) tape with invalid
Frame setting ON.
• Select to print with no Frame,
to cancel.
OK to Feed?
Feeding tape after printing when [Chain
Print] is selected. Refer to the Setting
Margins section in this guide.
Insert
0.47"
Only 0.47" (12 mm) Tape Cassette is available
for Deco Mode or Home Label templates.
Wrong Tape! Use a Tape Cassette with the mark.
Problem Solution
The display
stays blank
after you have
turned on the
label maker.
Check that the batteries are correctly
inserted.
If the batteries are weak, replace them.
Check that the AC Adapter is correctly
connected.
When the label
is printed out,
there is too
much margin
(space) on both
sides of the text.
Refer to the Setting Margins section in this
guide and select [Half] or [Narrow] to have
smaller margins for your label.
The label
maker does not
print, or the
printed
characters are
not formed
properly.
Check that the Tape Cassette has been
inserted correctly.
If the Tape Cassette is empty, replace it.
Check that the Cassette Cover is closed
correctly.
The setting has
cleared on its
own.
The batteries may be weak. Replace them.
When power is disconnected for more than
three minutes, all text and formats in the
display are cleared. Language and Unit
settings will also be cleared.
A blank
horizontal line
appears
through the
printed label.
There maybe some dust on the Print Head.
Remove the Tape Cassette and use a dry
cotton swab to gently wipe the Print Head with
an up-and-down motion.
The label
maker has
locked up (i.e.,
nothing
happens when
a key is
pressed, even
though the label
maker is on.)
Refer to the Resetting the P-touch Home
section in this guide.
The power
turns off when
you try to print.
The batteries may be weak. Replace them.
Check that the batteries are correctly
inserted.
• T
he wrong AC Adapter is used. We recommend
using the AD-24 Adapter.
The tape does
not feed
properly or the
tape gets stuck
inside the label
maker.
Check that the end of the tape feeds under
the Tape Guides.
The Tape Cutter Lever is pressed while
printing. Do not touch the Tape Cutter Lever
during printing.
All text and
format settings
need to be
cleared to create
a new label.
Press + and select
[Text&Format].
To change the
language
setting.
Refer to the Initial Settings section in this
guide.
Category Basic Symbols/Pictograph Symbols
Punctuation
Business
Mathematics
Brackets
Arrows
Unit
Greek Letter
Number 1
Number 2
Number 3
Number 4
Basic Shape
Electrical
Fun
Family
Fashion
Vehicle
Sports
Category Basic Symbols/Pictograph Symbols (cont)
Hobby
Animal
Event
Food
Flower
Messaging
Signs
Audio/Visual
Nature
Others
Accented Characters
A a
C D c d
E e
G I g i
K L k l
N R n r
O o
S T s t
U u
Y Z y z
Deco Mode Formats
1 7
2 8
3 9
4 10
5 11
6 12
Home Label Templates
61
62
63
64
65
66
67
68
69
70
71
72
73
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
Frame Designs (cont)
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Font Samples
1 4
2 5
3 6
Frame Designs
Helsinki
Brussels
US
Florida
Belgium
San Diego
Los Angeles
Calgary
Atlanta
Adams
Brunei
Istanbul
Sofia
Germany
DON’T FORGET TO REGISTER!
Registering your product will provide purchase confirmation, proof of ownership and, if you choose, allow us to notify you of product
enhancements and special offers! You can register online at: www.registermybrother.com
LIMITED WARRANTY
Product warranty information can be found online at www.brother-usa.com/brother-support
FORMATTING KEYS
1Press to change the font settings.
2Press / to select the settings
you want, and then press .
NOTE
To cancel operations, press .
Refer to the
Font Samples
table illustrated in this
guide.
The actual, printed font size depends on the tape
width, number of characters, and number of input
lines. Once characters reach a minimum size, the
selected font will default to a custom font, based on
the Helsinki style. This allows labels to print using
the smallest text possible on narrow or multi-line
labels.
Font Key
4
/ (Select an item)
Font Helsinki
Brussels
US
Florida
Belgium
San Diego
Los Angeles
Calgary
Atlanta
Adams
Brunei
Istanbul
Sofia
Germany
Size Large
Medium
Small
Width Normal
× 2
× 1/2
Style Normal
Bold
Outline
Shadow
Solid
Italic
I + Bold
I + Outline
I + Shadow
Vertical
Press to select the frame design. Refer to
the Frame Designs table section in this guide.
NOTE
To cancel operations, press .
Press to select various symbols. Refer to
the Basic Symbols/Pictograph Symbols table
sections in this guide.
NOTE
To cancel operations, press .
You can also select from the Basic Symbols and
Pictograph Symbols categories by pressing the
shortcut keys under (5)
Helpful Hints, Shortcuts
.
HELPFUL HINTS
Frame Key
/ (Select a frame)
Symbol Key
/ [
Basic/Pictograph
]
/ (Select category)
/ (Choose a symbol)
Shortcuts (Symbol)
Symbol
/
[
Basic/Pictograph
]
Basic
Punctuation Number 1
Business Number 2
Mathematics Number 3
Brackets Number 4
Arrows Basic Shape
Unit Electrical
Greek Letter
Pictograph
Fun Food
Family Flower
Fashion Messaging
Vehicle Signs
Sports Audio/Visual
Hobby Nature
Animal Others
Event
5
Reset your label maker when you want to initialize
the settings, or in the event it is not working
properly. Resetting clears all the text, settings, and
stored files.
1Turn off the label maker, hold down
and , and then press to turn the
label maker back on.
2First release the power button, and then
release and .
The label maker turns on with its internal
memory reset.
NOTE
Shortcuts
Language
Label Length
Margin
Deco Mode
File
Tab
Tab Length
Clear
Unit
Helpful Tips
Clear
Feed
Print Options
Resetting the P-touch Home
If you have questions or need information
about your Brother product, please visit us
online or call.
For FAQs, Troubleshooting, and to download
manuals, visit support.brother.com.
To order supplies and accessories, visit
www.brother-usa.com or call
1-877-552-6255.
For USA Customer Service, call
1-877-BROTHER (1-877-276-8437)
Fax: 1-901-379-1210
CAUTION
USING A COMBINATION OF DIFFERENT
BATTERIES (SUCH AS ALKALINE WITH
Ni-MH) , MAY RESULT IN AN EXPLOSION.
DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUCTIONS.
• Remove the batteries if you do not intend to
use the label maker for an extended period
of time.
• Dispose of batteries at an appropriate
collection point, not in the general waste
stream. Be sure to observe all applicable
federal, state, and local regulations.
• When storing or discarding a battery, wrap
it with cellophane tape to prevent it from
short-circuiting. (see illustration)
1. Cellophane tape
2. Alkaline or Ni-MH
battery
Replace all six batteries at the same time.
Do not mix old and new batteries when you use
the machine.
2
1


Product specificaties

Merk: Brother
Categorie: Niet gecategoriseerd
Model: P-touch PT-D202

Heb je hulp nodig?

Als je hulp nodig hebt met Brother P-touch PT-D202 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Brother

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd