Brother P-Touch Edge PT-E110 Handleiding

Brother Labelprinter P-Touch Edge PT-E110

Lees hieronder de ๐Ÿ“– handleiding in het Nederlandse voor Brother P-Touch Edge PT-E110 (17 pagina's) in de categorie Labelprinter. Deze handleiding was nuttig voor 55 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/17
ELECTRONIC LABELING SYSTEM
(QJOLVK
๎˜ƒ8VHUยทV๎˜‡*XLGH
E11
0
ELECTRONIC LABELING SYSTEM
GETTING STARTED
Installing Power Supply and Tape Cassette
With the LCD facing down, open the Cassette
Cover by pressing the grooved tab and
pushing in the direction of the arrow, as
illustrated.
When replacing batteries or tape cassettes,
make sure the power is turned off.
This P-touch labeling system requires six (6)
AAA alkaline batteries or six (6) fully-charged
Ni-MH batteries, not included.
1
Print Head
Tape Cutter LeverCassette Cover
1 2
Thank you for purchasing a Brother P-touch labeling system!
Use your new Brother P-touch labeling system to create a wide variety of custom, self-adhesive labels.
This P-touch labeling system uses Brother TZe or HGe tapes. TZe and HGe tape cassettes are available in many color and sizes. For
a complete list of tapes compatible with your P-touch labeling system, visit us at: www.brother.com.
Please read this guide, and the included Product Safety Guide, before using this P-touch labeling system. After reading this guide, keep
it in a safe place.
D01240001
(QJOLVK
๎˜ƒ8VHUยทV๎˜‡*XLGH
E11
0
Insert the Tape Cassette following the
drawing marked inside the case. Gently
press the Cassette into the P-touch labeling
system until it clicks into place.
๎˜‚ &๎˜Ž๎˜œ๎˜…๎˜†๎˜–๎˜‹๎˜”๎˜…๎˜†๎˜’๎˜Š๎˜‹๎˜”๎˜†๎˜ƒ๎˜Ž๎˜“๎˜…๎˜†'๎˜Ž๎˜–๎˜–๎˜…๎˜‰๎˜‰๎˜…๎˜†๎˜๎˜–๎˜†๎˜๎˜Ž๎˜”๎˜œ๎˜…๎˜˜๎˜† ๎˜†๎˜Š๎˜”๎˜† ๎˜—
๎˜‚ ;๎˜–๎˜…๎˜†๎˜Š๎˜‘๎˜๎˜’๎˜†<๎˜”๎˜Š๎˜‰๎˜„๎˜…๎˜”๎˜†๎˜ƒ=๎˜…๎˜†๎˜Š๎˜”๎˜†>?๎˜…๎˜†๎˜‰๎˜Ž๎˜“๎˜…๎˜–๎˜†!๎˜๎˜‰๎˜„๎˜†๎˜‰๎˜„๎˜๎˜–๎˜†
machine.
Close the Cassette Cover and gently press
until it clicks into place.
NOTE
If you prefer to use the optional AC Adapter instead
of using batteries:
1.
Insert the Power Adapter cord into the AC Adapter
Jack on the side of the P-touch labeling system.
2.
Insert the Power Adapter into a grounded
AC electrical outlet.
Tape Exit Slot
Toothed Wheel
Cutter Edge
End of Tape
Tape Guides
3
AC Adapter Jack
4


Product specificaties

Merk: Brother
Categorie: Labelprinter
Model: P-Touch Edge PT-E110
Soort bediening: Knoppen
Kleur van het product: Black, Orange
Gewicht: 400 g
Breedte: 109 mm
Diepte: 202 mm
Hoogte: 55 mm
Kleur: Nee
Beeldscherm: LCD
Ethernet LAN: Nee
Ondersteund aantal accu's/batterijen: 6
Temperatuur bij opslag: -20 - 60 ยฐC
Printsnelheid: 0.8 lpm
AC-adapter, uitgangsspanning: 9 V
AC-adapter, uitgangsstroom: 1.6 A
Maximale resolutie: 180 x 180 DPI
Printkleuren: Zwart
Printtechnologie: Thermo transfer
Cartridge(s) meegeleverd: Ja
Toetsenbordindeling: QWERTY
Maximale print breedte: 9 mm
Printsnelheid (metrisch): 20 mm/sec
Maximale label breedte: 12 mm
Wifi: Nee
Bedrijfstemperatuur (T-T): 10 - 35 ยฐC
Batterijtechnologie: Alkaline
Type batterij: AAA
Soort tape: HGe/TZe

Heb je hulp nodig?

Als je hulp nodig hebt met Brother P-Touch Edge PT-E110 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Labelprinter Brother

Handleiding Labelprinter

Nieuwste handleidingen voor Labelprinter