Broan BWT2304SSB Handleiding

Broan Afzuigkap BWT2304SSB

Lees hieronder de 📖 handleiding in het Nederlandse voor Broan BWT2304SSB (36 pagina's) in de categorie Afzuigkap. Deze handleiding was nuttig voor 60 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/36

MODELS BWT1304SS • BWT1304SSB •

BWT2304SS • BWT2304SSB

Page 1

READ AND SAVE THESE INSTRUCTIONS

CHIMNEY

RANGE HOOD

! INTENDED FOR DOMESTIC COOKING ONLY . !

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR

INJURY TO PERSON(S) OBSERVE THE FOLLOWING:

1. Use this unit only in the manner intended by the manufacturer.

If you have questions, contact the manufacturer at the

address or telephone number listed in the warranty.

2. Before servicing or cleaning unit, switch power off at service

panel and lock service disconnecting means to prevent

power from being switch on accidentally. When the service

disconnecting means cannot be locked, securely fasten a

prominent warning device, such as a tag, to the service

panel.

3. Installation work and electrical wiring must be done by

qualified personnel in accordance with all applicable codes

and standards, including fire-rated construction codes and

standards.

4. Sufficient air is needed for proper combustion and exhausting

of gases through the flue (chimney) of fuel burning equipment

to prevent backdrafting. Follow the heating equipment

manufacturer’s guidelines and safety standards such as

those published by the National Fire Protection Association

(NFPA), the American Society for Heating, Refrigeration

and Air Conditioning Engineers (ASHRAE) and the local

code authorities.

5. This product may have sharp edges. Be carefule to avoid

cuts and abrasions during installation or cleaning.

6. When cutting or drilling into wall or ceiling, do not damage

electrical wiring and other hidden utilities.

7. Ducted fans must always be vented to the outdoors.

8. Do not use this unit with any other solid-state speed control

device.

9. Use only metal ductwork.

10. This unit must be grounded.

TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE:

a) Never leave surface units unattended at high settings.

Boilovers cause smoking and greasy spillovers that may

ignite. Heat oils slowly on low or medium settings.

b) Always turn hood ON when cooking at high heat or when

cooking flaming foods (i.e. Crêpes Suzette, Cherries Jubilee,

Peppercorn Beef Flambé).

c) Clean ventilating fans frequently. Grease should not be

allowed to accumulate on fan or filters.

d) Use proper pan size. Always use cookware appropriate for

the size of the surface element.

WARNING

TO REDUCE THE RISK OF INJURY TO PERSON(S) IN THE

EVENT OF A RANGE TOP GREASE FIRE, OBSERVE THE

FOLLOWING*:

1. SMOTHER FLAMES with a close-fitting lid, cookie sheet, or

metal tray, then turn off the burner. BE CAREFUL TO PREVENT

BURNS. IF THE FLAMES DO NOT GO OUT IMMEDIATELY,

EVACUATE AND CALL THE FIRE DEPARTMENT.

2. NEVER PICK UP A FLAMING PAN – You may be burned.

3. DO NOT USE WATER, including wet dishcloths or towels –

This could cause a violent steam explosion.

4. Use an extinguisher ONLY if:

A. You know you have a Class ABC extinguisher and you

know how to operate it.

B. The fire is small and contained in the area where it

started.

C. The fire department has been called.

D. You can fight the fire with your back to an exit.

* Based on “Kitchen Fire Safety Tips” published by NFPA.

CAUTION !

1. For indoor use only.

2. For general ventilating use only. Do not use to exhaust

hazardous or explosive materials and vapors.

3. To avoid motor bearing damage and noisy and/or

unbalanced impeller, keep drywall spray, construction dust,

etc. off power unit.

4. Do not use over cooking equipment greater than 60,000

BTU/hr. as the blower motor will shut down intermittently.

5. Your hood motor has a thermal overload which will

automatically shut off the motor if it becomes overheated.

The motor will restart when it cools down. If the motor

continues to shut off and restart, have the hood serviced.

6. The bottom of the hood MUST NOT BE LESS than 26” and

at a maximum of 36” above cooktop for best capture of

cooking impurities.

7. Two installers are recommended because of the size of

this hood.

8. To reduce risk of fire and to properly exhaust air, be sure

to duct air outside. Do not exhaust air into spaces within

walls or ceilings or into attics, crawl spaces, or garages.

9. Be careful when installing the decorative flue and hood,

they may have sharp edges.

10. Please read specification label on product for further

information and requirements.

INSTALLER: LEAVE THIS GUIDE WITH THE HOMEOWNER.

HOMEOWNER: OPERATION AND MAINTENANCE INFORMATION ON PAGE 2.

WARNING

To register this product visit:

www.broan-nutone.com or

www.broan.ca

MODELS BWT1304SS • BWT1304SSB •

BWT2304SS • BWT2304SSB

Page 2

CLEANING & MAINTENANCE

Proper maintenance of the Range Hood will assure proper

performance of the unit.

MOTOR

The motor is permanently lubricated and never needs oiling. If

the motor bearings make excessive or unusual noise, replace

the blower with the exact service blower.

GREASE FILTERS

The grease filters should be cleaned frequently. Use a warm

dishwashing detergent solution. Grease filters are dishwasher

safe.

Clean all-metal filters in the dishwasher using a non-phosphate

detergent. Discoloration of the filters may occur if using phosphate

detergents, or as a result of local water conditions - but this will

not affect filter performance. This discoloration is not covered by

the warranty.

Remove grease filters by pulling down on the metal latch tab. This

will disengage the filters from the hood. Tilt the filters downward

and remove.

NON-DUCTED RECIRCULATION FILTERS

The non-ducted recirculation filters should be changed every

6 months. Replace more often if your cooking style generates

extra grease, such as frying and wok cooking. Turn the filter

mounting tabs to remove filter and replace.

GLASS PANEL (Models BWT1304SSB and BWT2304SSB)

Hot water with mild soap or glass cleaner is all that is usually

needed. When using mild soap, rinse with clear water. Wipe dry

with a clean, soft cloth to avoid water marks.

STAINLESS STEEL CLEANING

DO:

• Regularly wash with clean cloth or rag soaked with warm water

and mild soap or liquid dish detergent.

• Always clean in the direction of original polish lines.

• Always rinse well with clear water (2 or 3 times) after cleaning.

Wipe dry completely.

• You may also use a specialized household stainless steel

cleaner.

DON’T:

• Use any steel or stainless steel wool or any other scrapers to

remove stubborn dirt.

• Use any harsh or abrasive cleansers.

• Allow dirt to accumulate.

• Let plaster dust or any other construction residues reach the

hood. During construction/renovation, cover the range hood to

make sure no dust sticks to the stainless steel surface.

Avoid: When choosing a detergent

• Any cleaners that contain bleach will attack stainless steel

• Any products containing: chloride, fluoride, iodide, bromide

will deteriorate surfaces rapidly.

• Any combustible products used for cleaning such as acetone,

alcohol, ether, benzol, etc., are highly explosive and should

never be used close to a range.

OPERATION

BWT1304SS .AND BWT2304SS MODELS

Push the light button to turn the lights on and off.

Push the blower controls to select low, medium, or high blower

speed (for each speed selected, its indicating light will beam).

Press on the current blower speed another time to stop it.

While the blower is activated, press the 5-minute delay button

once (its indicating light will beam) to get the hood running for

5 minutes and then turn off automatically.

When the 5-minute delay is activated, changing the blower

speed will cancel the 5-minute delay function.

To cancel the delay off function before the end of the 5-minute

cycle, press again on 5-minute delay push button or select an

other blower speed.

BWT1304SSB .AND BWT2304SSB MODELS

LIGHT

ON/OFF

LOW MED. HIGH

BLOWER CONTROLS

5-MINUTE

DELAY

Tap on the light button to turn the lights on; the backlight of the

button will also turn on. Tap another time to turn off the lights

(backlight of the light button will also turn off).

Tap on the power on/off button: the backlight of the button will

turn on, the blower will work on low speed and the light will be

on. The backlight of the blower controls and light will be on too.

Tap another time on the power on/off button; the blower and the

light will turn off as well as all backlights.

Tap the + blower control; the backlight of button will turn on, the

blower starts to work on low speed and the LED display shows 1.

Tap another time for the blower to reach medium speed; LED

display shows 2. Tap again for the blower to reach high speed;

the LED display will show 3.

Tap the - blower control; the backlight of button will be on, the

blower speed will decrease one speed and the LED display will

show the current working speed. When the blower is set on low

speed (1), tapping another time will turn off the blower (as well

as the backlight of the blower control).-

While the blower and lights are on, tap on the 5-minute delay

button once (its backlight will turn on) to get the hood running for

5 minutes and then turn off automatically blower and lights.

To cancel the delay off function before the end of the 5-minute

cycle, tap again on the 5-minute delay button or change the

blower speed using one blower control ( or + -). The backlight

of the 5-minute delay button will then turn off.

5-MINUTE

DELAY

LIGHT

ON/OFF

BLOWER

CONTROLS

POWER

ON/OFF

LED

DISPLAY

MODELS BWT1304SS • BWT1304SSB •

BWT2304SS • BWT2304SSB

Page 3

INSTALL THE DUCTWORK

(Ducted Hoods Only)

1. Decide where

the ductwork

will run

between the

hood and the

outside.

2. A straight, short

duct run will

allow the hood

to perform most

efficiently.

3. Long duct

runs, elbows

and transitions

will reduce the

performance of

the hood. Use as few of them as possible. Larger ducting

may be required for best performance with longer duct runs.

4. Install wall cap or roof cap. Connect round metal ductwork

to cap and work back towards the hood location. Use duct

tape to seal the joints between ductwork sections.

MEASURE THE INSTALLATION

The minimum hood distance above cooktop MUST NOT BE

LESS than 26”.

A maximum of 36” above cooktop is highly recommended for

best capture of cooking impurities.

Distances over 36” are at the installer and users discretion;

providing that the ceiling height permits.

ROUND DUCT

ROOF CAP

ROUND

ELBOW

26" MIN. ABOVE

COOKING SURFACE

WALL

CAP

HOOD

DECORATIVE

FLUE

10-1/2”

WALL CAP

26” - 36” ABOVE

COOKING SURFACE

HOOD

DECORATIVE FLUE

ROOF CAP

6” ROUND DUCT

ROUND ELBOW

11-7/8”

TO CENTER OF

BRACKET HOLES

HOOD

MOUNTING

BRACKET

3-3/8”

DUCT

CENTER

LINE

PREPARE THE HOOD

Unpack hood and check contents. You should receive:

1 - Hood

1 - Decorative Flue Assembly

2 - Damper Flaps

1 - Lower Flue Mounting Bracket

1 - Upper Flue Mounting Bracket

1 - Hood Mounting Bracket

2 - Aluminum Grease Filters ( , included BWT1 series

packaged in a cardboard box)

2 - Hybrid Baffle Filters ( , included packaged in a BWT2 series

cardboard box)

1 - Installation Manual

1 - Parts Bag containing:

4 - Mounting Screws (no. 8 x 3/8” Pan Head)

7 - Mounting Screws (no. 8 x 1-1/2” Flat Head)

7 - Drywall Anchors

2 - Washers

7 MOUNTING

SCREWS

(no. 8 x 1½”

Flat Head)

7 DRYWALL

ANCHORS

4 MOUNTING

SCREWS

(no. 8 x 3/8”

Pan Head)

DECORATIVE FLUE

2 WASHERS

UPPER

FLUE MOUNTING

BRACKET

HOOD

MOUNTING

BRACKET

LOWER

FLUE MOUNTING

BRACKET

DAMPER

FLAPS

Product specificaties

Merk:	Broan
Categorie:	Afzuigkap
Model:	BWT2304SSB

Heb je hulp nodig?

Als je hulp nodig hebt met Broan BWT2304SSB stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Afzuigkap Broan

Broan Elite E6430SSM Handleiding

2 November 2024

Broan Elite E6030SSM Handleiding

2 November 2024

Broan Elite RMIP45 Handleiding

3 April 2024

Broan Elite 619004 Handleiding

3 April 2024

Broan BWS1304SS Handleiding

3 April 2024

Broan EWS1306BLS Handleiding

3 April 2024

Broan BWP1304SS Handleiding

3 April 2024

Broan PM250 Handleiding

3 April 2024

Broan Elite 614804EX Handleiding

3 April 2024

Broan BWP1364SS Handleiding

3 April 2024

Handleiding Afzuigkap

Nieuwste handleidingen voor Afzuigkap

MPM -61-PX-75 Handleiding

24 December 2024

MPM -61-PX-76 Handleiding

24 December 2024

MPM -61-PX-77 Handleiding

24 December 2024

Kaiser A 9315 ElfEm Eco Handleiding

20 December 2024

Kaiser A 9315 RotEm Eco Handleiding

20 December 2024

Kaiser AT 9343 Handleiding

20 December 2024

Kaiser A 6315 RotEm Eco Handleiding

20 December 2024

Kaiser AT 6445 AD Eco Handleiding

20 December 2024

Kaiser A 6423 ElfBE Eco Handleiding

20 December 2024

Kaiser AT 8435 Eco Handleiding

20 December 2024