Bretford FPP1M2 Handleiding

Bretford Flat panel steun FPP1M2

Lees hieronder de 📖 handleiding in het Nederlandse voor Bretford FPP1M2 (3 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

FPP1M0 FPP1M1 FPP1M2

VESA MOUNTS -

LOW PROFILE, SINGLE ARM AND DUAL ARM

Assembly Instructions

Ref. Qty. Part No. Description

AA 12 030-0845 M4 x 0.7 , 20mm Phillips Pan Screws

BB 12 030-1234 M4 x 0.7 , 12mm Phillips Pan Screws

CC 1/2 012-0760 Cable Clips (Beam)

(1) for FPP1M1 & (2) for FPP1M2

(No Cable Clip is used on FPP1M0)

DD 1/2 012-0815 Cable Clip (Pole)

(1) for FPP1M0 & FPP1M1

(2) for FPP1M2

Hardware List

With someone’s help, slide the monitor mount assembly into the pole. NOTE:

Make sure the screws in the spike are loosened and the release lever is pull out

while sliding in spike. Once desired location is determined, tighten spike screws.

STEP 2

Attach your monitor to the vesa plate with either screws (AA) or (BB) as indicated

above. NOTE: The screws that came with your monitor may be sufcient for mounting

to the vesa plate. As long as they are a M4 type screw and sufcient in length.

STEP 1

AA - (20mm screws)

These are used on the inner

hole pattern for monitors

with a 75mm pattern.

BB - (12mm screws)

These are used on the outer

hole pattern for monitors

with a 100mm pattern.

Quick Release

Lever - Pull out

to slide in

Loosen Screws

Prior to Entry.

Tighten to secure

in place. (Use

3/16” Allen wrench

provided)

These are the main

tension screws. They

control the pitch of the

vesa joint.

Part # 031-7675

Rev. 08.28.07 CZ

Fold plastic cable

clip closed.

Feed power cords through clips. Then snap clips

into beam’s bottom slots and pole’s slot as shown.

Power cords

Knuckle joints are preset to correct

tension. No adjustments are needed.

NOTE: 2 different sets of plastic clips are

provided for the best possible t.

Product specificaties

Merk:	Bretford
Categorie:	Flat panel steun
Model:	FPP1M2
Kleur van het product:	Zilver
Diepte:	381 mm
Montagewijze:	Bureau
Maximale gewichtscapaciteit:	- kg
Montage interface compatibiliteit (min):	75 x 100 mm
Montage interface compatibiliteit (max):	100 x 75 mm
Aantal displays ondersteund:	3
Maximale schermgrootte:	12 "
Minimale schermgrootte:	- "