Bretford Core X Handleiding

Bretford Oplader voor mobiel apparaat Core X

Lees hieronder de 📖 handleiding in het Nederlandse voor Bretford Core X (4 pagina's) in de categorie Oplader voor mobiel apparaat. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

CAPACITY per slot width 1.00” 1.25” 1.50” ! ! !

TCOREX24 2 shelves! ! 24 20 devices ! !

TCOREX36 3 shelves! ! 36 30 devices ! !

TCOREX45 3 shelves 45 36 30 devices ! ! ! !

COMPATIBILITY Designed for various sized laptops & chromebooks, yet versatile enough to

support most tablets. Uses the device manufacturer supplied AC power cord and adapter.

! "OUTSIDE DIMENSIONS 29.50”W x 26.00”D x 44.75”H

! ! "SLOT DIMENSIONS 1.25” or 1.50” W x 17”D x

! ! 12.00”H for TCOREX24"

! ! 10.00”H for TCOREX36"

! ! 1.00” or 1.25” or 1.50”W x 17”D x"

! ! 10.00”H for TCOREX45"

!WEIGHT WITHOUT DEVICES!TCOREX24 163 pounds! "

! ! TCOREX24B 170 pounds! "

! ! TCOREX36 175 pounds! "

! ! TCOREX36B 182 pounds! "

! ! TCOREX45 185 pounds! "

! ! TCOREX45B 192 pounds! "

! "POWER MANAGER!Digital

!POWER REQUIREMENTS !100 -125V ac, 12A, 50/60Hz;

!SHIPPING Ships fully assembled, ready to load devices

!WARRANTY For product speciﬁc warranty information,

! ! please visit: bretford.com/warranty

USER GUIDE

CoreX Carts

TCOREX24 CoreX Charging Cart AC for up to 24 devices w/Back Panel !

TCOREX24B CoreX Charging Cart AC for up to 24 devices w/Rear Door !

TCOREX36 CoreX Charging Cart AC for up to 36 devices w/Back Panel !

TCOREX36B CoreX Charging Cart AC for up to 36 devices w/Rear Door !

TCOREX45 CoreX Charging Cart AC for up to 45 devices w/Back Panel !

TCOREX45B CoreX Charging Cart AC for up to 45 devices w/Rear Door!

Part # 031-10608 rev December 2016

MADE IN USA

with globally

sourced products

www.bretford.com

Technical Speciﬁcations

POWER SWITCH

Located on the

left side of the

cabinet, in the

Power Cord

Shroud

POWER CORD SHROUD

Located on the left side

of the cabinet, provides

a cord winder for the

power cord, and an IEC

outlet for plugging in the

12-foot power cord

DIRECTIONAL LOCK CASTERS

When engaged, keep the

cart rolling in the right

direction. When

unengaged, allow the cart

to be easily maneuvered

into small spaces. Marked

with a Green Locking Tab

CORD PASS-THRU ON TOP

Allows devices to be

powered outside of the

cart, while their power

cords are plugged

inside the cart.

Front View

Rear View

REAR SECURITY PANEL

VERSION

Can be securely held

in place with Security

Bolts. Panel easily lifts

off to expose the back

of the cart, where the

adapters and cord

sets are kept in cable

bins.

DOOR LOCK SHROUD

Protects the padlock

and the locking

handle during

transport

WARNING:

This cart is not intended

to hold items on the top

surface. Do not place

any item weighing more

than 1 pound on the top

surface of the cart to

avoid damage.

INTEGRATED HANDLE

Handle integrated into

the top of the cart for

pushing and moving

the cart.

USER GUIDE | CoreX CARTS

SETTING THE COMBINATION LOCK

Your new COREX Cart comes equipped with a resettable Combination Padlock. You can program the

lock with your own combination. The lock starts with 0-0-0-0. Follow the directions with the look for

changing the combination. Remember to depress the shackle before un-engaging it from the lock.

AUXILIARY OUTLET CORD

This plugs into its own IEC outlet,

and provides the power for the

cord pass-thru.

NOTICE: This auxiliary outlet

provides a maximum 2 amps.

General Use

REAR LOCKING DOOR

VERSION

Hinged rear door

provides easy access

to the back of the cart.

Door locks in place

with a key. Keys found

in the Hardware Pack.

Rear Access

Versions

Changing the Slot Width

from 1.00” to 1.25” to 1.50”

USER GUIDE | CoreX CARTS

Device Storage & Cable Management

1. Rear Security Panel Versions: At the back of the cart, unscrew the two Thumb

Screws on both sides of the cart. Lift the back panel off of the chassis. This exposes

the power outlet modules for each of the shelves.

Rear Locking Door Versions: Using the keys from the Hardware Pack, unlock the

Rear Door and swing open to reveal the power outlet modules for each of the shelves.

2. Starting in the rear of the cart with the back panel removed, insert a power adapter in

the storage bin for the associated device storage shelf (top, middle or bottom).

3. Measure the amount of cable necessary to reach from the power adapter located in the

bin to the front of the cart (over the AC outlet box, from the back to the front of the cart,

through the cable management hooks). Leave sufﬁcient slack for the power connector

to plug into the device.

4. Plug the device AC adapter plug into one of the outlets nearest to where the power

adapter is located in the bin.

5. Repeat the above process for the total number of devices’ power adapters & cable sets.

6. In the front of the cart, insert a device into each of the slots, and plug in the power

connector to each device.

7. Replace the Back Panel and either reinsert the Thumb Screws, or insert the Security

Screws from the Hardware Pack (using the Security Bit, also in the Hardware Pack).

8. Place the cart near a wall outlet and plug the cart in.

9. Turn on the power switch - located in the front of the cord winder shroud

10. Once the cart is turned on, the power manager begins rotating power to the power

strips very 5 minutes. This allows efﬁcient charing of the devices in the cart from one

single 15 amp circuit.

1. Unscrew the Thumb Screws - one on

each side of the cart at the back. Lift o the ﬀ

Back Panel.

TCOREX24

TCOREX36

rear view of the power outlet modules"

2-5. Plug adapters in & thread power

connectors to the front of the cart

front view of the

dividers & slot ID

numbers"

6. Hang the

power

connectors

above the slots

using the slots

hooks provided

1. Slot

2. Tabs located at the front of the plastic device platforms on each of the

shelves can be depressed, and the platform lifts out of the cart.

3. Flip the device platform over, and remove each of the plastic dividers by

“pinching” the divider tabs that stick thru the platform.

4. Reinsert the dividers into the square slots which create the 1.5” slot width.

(see the closeup at the left of the underside of the platform.)

5. Flip the device platform upright and reinsert into the shelf.

6. The slot number indicator can now be repositioned at “10”, replacing “12”

….. “20” replacing #24” and “30” replacing “36”

1.00”

1.25”

1.50”

closeup underside of device platform

Security Screws & Security Bit included in

hardware pack. Your choice to use the

Security Screws.

1. Slot widths ship automatically at

the 1.25” width for the

TCOREX36 & TCOREX24,

1.00” for the TCOREX45. If your

devices need the larger width,

follow these simple directions.

Product specificaties

Merk:	Bretford
Categorie:	Oplader voor mobiel apparaat
Model:	Core X
Kleur van het product:	Zwart
Gewicht:	81600 g
Breedte:	749.3 mm
Diepte:	660.4 mm
Hoogte:	1130.3 mm
Soort:	Wagentje voor draagbaar apparaatbeheer
Stroom:	12 A
Plaatsing:	Vloer
Meegeleverde kabels:	AC
Met slot:	Ja
Verstelbare plateaus:	Ja
Handvat(en):	Ja
AC-ingangsspanning:	120 V
AC-ingangsfrequentie:	50 - 60 Hz
Maximale schermgrootte:	- "
Number of devices supported:	45
Ondersteunde draagbare apparaten:	Notebook, Tablet
Sleufbreedte:	25.4 mm
Sleufdiepte:	431.8 mm
Sleufhoogte:	254 mm