Braun Saphir-Jet PV 2510 Handleiding

Braun Strijkijzer Saphir-Jet PV 2510

Lees hieronder de 📖 handleiding in het Nederlandse voor Braun Saphir-Jet PV 2510 (4 pagina's) in de categorie Strijkijzer. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Saphir-jet

PV 2502

PV 2505

PV 2510

PV 2512 Type 4689

Steam iron

English

Use Instructions

Guarantee

Service Centers

English

Super hard sole plate

Your Braun steam iron has a unique sole plate

made out of a special resistant alloy, polished

with sapphire particles. This process developed

by Braun makes the sole plate extremely durable

and scratch resistant. Even ironing over sharp-

edged fasteners, studs or zippers will not cause

scratches that may snag or damage sensitive

fabric. Thanks to its extra hardness, this sole

plate will maintain its easy gliding properties

throughout the life of the iron.

2 3

Our products are engineered to meet the

highest standards of quality, functionality

and design. We hope you thoroughly enjoy

your new Braun steam iron.

Notice: Should the sole plate of your model have

a protective plastic covering, take it oﬀ before

using the iron.

Important Safeguards

• Read all instructions carefully before using the iron. Keep the use instructions during the

entire life of the iron.

• Before ﬁlling with water, always disconnect the plug from the socket ﬁrst.

• Always pull the plug and not the cord.

• Electric irons reach high temperatures during operation that could lead to burns.

• Keep the iron away from children, and when it is turned on, keep the unit under supervision.

• Disconnect the plug when leaving the room where you are ironing, even if it is only brieﬂy.

• Never iron or dampen clothes while wearing them.

• During ironing pauses, always place the iron upright in its heel rest.

• Never immerse the iron in water or other liquids.

• The cord should never come into contact with hot objects or the sole plate.

• Check the cord periodically for possible damage.

• Do not use a damaged iron.

• Take it to a Braun Service Center for repair.

• Braun electric appliances meet applicable safety standards.

• This appliance can only be opened by an authorised Braun Service Centre for repairs.

• The cord of this appliance may only be replaced by an authorised Braun Service Centre since

special tools are required.

• Faulty, unqualiﬁed repair work may cause accidents or injury to the user.

• Make sure your voltage corresponds to that printed on the iron. Connect the iron to an alternating

current (~) outlet only.

Table of features for each model

Feature: Model: PV 2502 PV 2505 PV 2510 PV 2512

Jet of steam

●●●●

Shot of steam

● ●

Extra steam

● ●

Spray

●●●●

Speciﬁcations

Voltage/wattage: See typeplate at the

bottom of the unit.

Water tank capacity: 215 cc (approximately

1 ﬁlling beaker q

of water ﬁlled up to the

mark = 1 tank ﬁlling).

Description

Temperature selector

Water tank with sliding shutter opening

Water spray nozzle

Steam regulator / self-cleaning activator

and anti-calc. valve

Extra steam button

Jet of steam button

1- or 2-function button (water-spray/

shot of steam, see «Table of features»)

Pilot light

Swivel cord

Heel rest

Cord storage/typeplate

Transparent water tank

Maximum marking («max.»)

Sole plate with 71 steam vents

Full-lenght button groove

Slim pointed tip

Jet of steam outlet

Filling beaker

proglide-jet

jet

-jet

max

jet

max

min

jet

max

min

shot

spray

shot

spray

jet

shot

15 14

g h

c d

12a

Praktical Guidelines

Type of Water to be Used

This iron is designed for tap water. However, if

you have hard water we recommend to use:

– a mixture of 1/2 part tap water and 1/2 part

distilled water from drug stores or grocery

stores.

Important: Never use distilled water (battery

water). Do not add any additives (e. g. starch) to

the water.

To ﬁll iron

1. Pull the plug out of the wall outlet.

2. Put the steam regulator 4

in position «

•

(= steam oﬀ).

3. Open sliding shutter 2

4. Place the iron in the upright position and ﬁll

with water slowly through the tank opening 2

to the «max.» marking L

(a), using the

beaker q

5. Close sliding shutter.

Selecting the temperature

Connect the iron to a safely located wall outlet

and select the ironing temperature with the

temperature selector 1

(b). As soon as the pilot

light 8

goes out, the iron has reached the

temperature selected. To avoid water dripping,

always rest the iron upright while heating it up

keep the steam regulator 4

in position «

•

(= steam oﬀ) (c).

You will usually ﬁnd the following symbols in

your garments:

The temperature selector 1

is marked with

these symbols:

min. The iron is connected

●

Synthetics (acrylic, acetate)

●●

Silk/rayon/nylon/polyester/

cotton blends/wool

●●●

Cotton/linen

max. Linen

Select the temperature you need according to

these symbols.

Spray, shot of steam, jet of steam

Before you start ironing, we recommend to press

the buttons 3 or 4 times, in order to activate

these functions.

Dry ironing

Set the steam regulator 4

in position «

•

(= steam oﬀ) (c) for dry ironing. The water

spray 7

may be used at any temperature

setting to dampen the laundry. The jet of steam

and the shot of steam 7

buttons can be

activated during dry ironing, provided that the

temperature selector 1

is within the continuous

red area

Steam ironing

(see «Table of features»)

Temperature selection: Set the temperature

selector 1

within the red

range steam (b) and wait

until the iron has reached the selected

temperature (i. e. the pilot light 8

goes oﬀ).

Steam ironing is possible in the entire red range.

Steam ironing at lower temperatures may cause

water drops instead of steam. Should this

happen, turn the steam regulator 4

to the

position «

•

» (= steam oﬀ) (c).

Steam regulator 4

Select the quantity of

steam required (c) for

each garment with the

steam regulator 4

. You

can increase the quantity

by turning the steam

regulator clockwise (wide

markings) to the end of the red marking.

Caution: While ironing do not turn the steam

regulator further, otherwise hot water may

come out from the sole plate (see section

«Decalcifying/Self-cleaning»).

By turning the steam regulator anti-clockwise

you can reduce the quantity of steam or turn the

steam oﬀ «

•

» (= steam oﬀ) (see «Ironing

Guide»).

Constant steam: Your Braun steam iron is

equipped with a special tank conﬁguration to

provide constant steam even when the water

level in the tank is low.

«Extra steam»*

(coming from the

steam vents in the sole

plate): For stubborn

creases and wrinkles,

collars and cuﬀs.

When ironing within

the red range

area the extra steam function can

be used. You can press the button 5

(d) for 3

seconds at intervals of no less than 15 seconds.

Jet of steam*

(coming from the

outlets p

at the slim

pointed tip o

): Caution:

Keep chil-dren away

from the jet of steam

and do not hold your

ﬁngers in front of the

outlets p

when activating this function.

When ironing within the red range

area the jet of steam function 6

can be used (e). To do so, press the button 6

intervals of no less than 5 seconds. The jet of

steam has been designed not only for steaming

hard to reach areas like pleats, inside of pockets

etc., but also for steaming hanging clothing (e. g.

velvet skirts, curtains, etc.) (g). The jet of steam

functions between horizontal and upright

positions. Be careful not to touch sensitive

textiles with the hot sole plate.

Shot of steam*

(coming from the vents

in the sole plate):

When ironing within

the red area

the shot of

steam function can be

used. It gives an extra,

particularly powerful shot of steam penetrating

deep into the textiles in order to straighten

creases, collars and pleats. The function «shot

of steam» can be used in normal ironing and

also horizontally for steaming hanging clothing

(e. g. velvet skirts, curtains etc.) (g). Press the

shot of steam button 7

at intervals of no less

than 5 seconds. When steaming be careful not to

touch sensitive textiles with the hot sole plate.

* If pressed too frequently, it can drip. Should

this happen, wait a few seconds before using it

again.

Spray (coming from the

nozzle 3

The spray function can

be used at any

temperature, to dampen

laundry. To do so, press

the button 7

(water spray

= blue).

Spray / shot of steam

2-function button:

With the models 2510

and 2512 the functions

«water spray» and «shot

of steam» can be

activated with a

2-function button. The

desired function can be

selected by turning the

button 7

as far as it will

go. The marking (blue =

water spray or red = shot

of steam) must point to

the respective function (f).

Turn the button from blue

(spray) to red (shot of

steam) anti-clockwise and from red to blue

clockwise (f).

Storage

After ironing, always pull the plug out of the wall

outlet. Set the temperature selector 1

to «min.»

(b) and the steam regulator 4

to «

•

» (= steam

oﬀ) (c).

To empty the iron hold it with the open water tank

opening 2

downwards (h) and shake it 1 or 2

times. The swivel cord 9

conveniently winds up

around the cord storage k

IMPORTANT: Store the cool steam iron in a dry

place and always standing on its heel rest

The sole plate may be damaged by remaining

water if it is stored horizontally. The warranty

does not cover faults or damage resulting from

improper storage of the iron.

Maintenance and Cleaning

To remove residues of minerals/starch from the

sole plate always use steel wool. Never use a

scouring pad, vinegar or other chemicals.

The steam vents m

and jet of steam outlets p

may be cleaned manually with a toothpick, if

necessary. Clean the sole plate regularly if you

use starch or other aids on the clothes for

ironing.

Decalcifying / Self-cleaning

Braun Saphir-jet irons have a built-in system

(anti-calc. valve) to prevent calciﬁcation. It allows

you to clean residues from the steam chamber.

Do not use commercial decalciﬁers; they may

damage the sole plate. We recommend to use

the self-cleaning function every 3 months.

Product specificaties

Merk:	Braun
Categorie:	Strijkijzer
Model:	Saphir-Jet PV 2510

Heb je hulp nodig?

Als je hulp nodig hebt met Braun Saphir-Jet PV 2510 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Strijkijzer Braun

Braun CareStyle 7 Pro IS 7285 Handleiding

12 Juli 2023

Braun CareStyle 3 Pro Handleiding

25 April 2023

Braun TexStyle 7 SI 7066 Handleiding

8 April 2023

Braun TexStyle 7 SI 7042 Handleiding

31 Maart 2023

Braun TexStyle 5 SI 5006 BL Handleiding

19 Maart 2023

Braun CareStyle 1 IS 1012 Handleiding

12 Maart 2023

Braun TexStyle 3 SI 3043 Handleiding

11 Februari 2023

Braun TexStyle 7 TS 725 Handleiding

1 Februari 2023

Braun CareStyle 7 IS 7043 Handleiding

6 December 2022

Braun TexStyle 7 SI 7088 Handleiding

3 December 2022

Handleiding Strijkijzer

Nieuwste handleidingen voor Strijkijzer

Calor FV5695C0 Handleiding

2 December 2024

Calor FV9834C0 Handleiding

2 December 2024

Calor Ultimate Pure FV9834 Handleiding

2 December 2024

Calor TurboPro Anti-Calc FV5695 Handleiding

2 December 2024

Calor Turbo Pro Anti-Calc FV5696 Handleiding

2 December 2024

Calor Maestro 2 FV1844 Handleiding

2 December 2024

Calor Ultimate FV9839 Handleiding

2 December 2024

Calor Pro Express Ultimate GV9568 Handleiding

2 December 2024

Calor Ultimate Pure FV9838C0 Handleiding

2 December 2024

Calor Smart Protect FV4980C0 Handleiding

2 December 2024