Boyo VTB201MA Handleiding

Boyo Dashcam VTB201MA

Lees hieronder de 📖 handleiding in het Nederlandse voor Boyo VTB201MA (1 pagina's) in de categorie Dashcam. Deze handleiding was nuttig voor 57 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
V T B 2 0 1 M A Q U I C K I N S T A L L A T I O N G U I D E
Quick Installation Guide
1. System Overview
One VTB201MA high resolution HD CMOS color camera
with the following features:
yWeatherproof and water reistant
yMirror/ Non-Mirror image selectable switch
yWide-angle lens 170°
yBuilt-in Microphone
y360-degree adjustable mounting angle
yAuto-iris lens that automatically adjusts to light conditions
yInfrared light for improved image quality in low-light
situations
yNightvision distance of approx 8M
20M Extension Cable Included
Supplied installation accessories
2. Installation
Install the VTB201MA as follows:
a. Install the VTB201MA camera in the desired location, as
follows:
1) Fasten the camera mounting bracket, using the 4 self-
tapping Philips screws, to the desired mounting
surface, as shown in the Step 1 arrows of Figure 1.
2) Position the camera in the camera mounting bracket.
Adjust the camera to the proper angle, and then attach
the camera and sun visor to the camera mounting
bracket using the 4 supplied hex-head machine screws
(with washers), as shown in the Step 2 and Step 3
arrows of Figure 1.
Figure 1. Installing the Camera
b. Route the extension cable from the camera location to the
location of the output device (not supplied), such as a
monitor or switcher.
c. Insert the male connector of the extension cable into the
appropriate female audio/video port of the output device
(not supplied), such as a monitor or switcher.
3. Normal/Mirror Selector
The camera default setting is in reverse viewing. To change to
non-mirror viewing, unplug the jumper plug with the green wires
and re-power the camera for the changes to take effect.
4. Grid Line Selector
The camera default setting is grid line on. To turn off the grid
lines, unplug the jumper plug with the blue wires and re-power
the camera for the changes to take effect.
5. Specifications
Item Specification
Image Sensor 1/3 1089
TV System NTSC
Effective Pixels 720 x 480
Minimum Illumination 0.0 Lux
Power Consumption 12 VDC, 250mA Max
Operating Temperature -20°C to 70°C
Dimensions
(Width x Height x Depth)
3 inches x 3 inches x 2.25 inches
Lens Angle 170°
Supplied Accessories Manual
Screws
20M Extension cable
DC Power cable
2 Jumper terminals
Warranty card
Registration card
CAUTION: To reduce the risk of electrical shock, disconnect the
battery from the electrical system of the vehicle before
starting the installation.
CAUTION: Before inserting screws into the mounting surface,
ensure that the underside of the mounting surface is
clear of equipment that might be damaged by the
screws.


Product specificaties

Merk: Boyo
Categorie: Dashcam
Model: VTB201MA

Heb je hulp nodig?

Als je hulp nodig hebt met Boyo VTB201MA stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Dashcam Boyo

Handleiding Dashcam

Nieuwste handleidingen voor Dashcam