Boss WL-20 Handleiding

Boss Niet gecategoriseerd WL-20

Lees hieronder de 📖 handleiding in het Nederlandse voor Boss WL-20 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Charging Both the Receiver (WL-20 / WL-20L)

and Transmitter (WL-T)

1. Connect the included USB cable and a

commercially available USB AC adaptor (5 V/0.5 A

or higher) to the receiver’s DC IN 5 V port.

2. Insert the transmitter into the TRANSMITTER jack

so that the transmitter also charges.

TransmitterReceiver

Transmitter

jack

BATTERY

indicator

DC IN 5 V port

(USB Micro-B

type)

POWER

indicator

NOTE

Insert only the BOSS transmitter into the TRANSMITTER jack.WL-T

If you connect headphones, high-volume sound might be

emitted, or the headphones might be damaged.

POWER indicator

Lit orange Charging.

Blinking green Charging is completed, and the transmitter is

in standby mode.

Rapid blinking

red

A charging error occurred. Contact your dealer

or a Roland customer service center.

BATTERY indicator

Blinking

orange

The system is monitoring the local state of

the 2.4 GHz wireless spectrum for 10 seconds,

and automatically making adjustments so that

the receiver and transmitter can connect with

optimal stability (Auto Wireless Connection).

Lit orange

Charging (Auto Battery Charge).

* The charging time diers depending on the

remaining battery charge and on the charging

environment.

Blinking green

Charging is completed.

* We recommend that you disconnect the transmitter

after charging is completed. If you leave it

connected, a small amount of power is used from

the battery, and the indicator blinks green once

every eight seconds.

* If you have not used the transmitter for a long time,

one charge might not be sucient. Disconnect and

reconnect the transmitter to complete charging.

Lit green

When ve hours have passed since charging

started, charging automatically stops in order

to protect the rechargeable lithiumion battery,

even if charging was not completed. To charge

completely, disconnect and reconnect the

transmitter.

Blinking red A charging error occurred.

& “Troubleshooting.”

Charging only the transmitter

Connect the included USB cable and a

commercially available USB AC adaptor

(5 V/0.5 A or higher) to the DC IN 5 V

port.

* When charging from the DC IN 5 V

port, the wireless connection does

not operate.

Other parts and their function

RECEIVE indicator

Lit blue during wireless communication.

Making Wireless Settings

(Auto Wireless Connection)

* Execute the following operation before you play your guitar (musical

instrument). In particular when you’re playing live or in a session, the

wireless conditions might change between the rehearsal and the

actual event, so you should execute the following operation once

again before the actual event.

1. Insert the transmitter into the TRANSMITTER

jack.

This blinks orange while Auto

Wireless Connection settings are

being made. The process completes

in approximately 10 seconds.

When the orange blinking stops,

remove the transmitter.

For stable wireless communication

If audio dropouts occur, it might be that the local state of the wireless

spectrum has changed. Execute the Auto Wireless Connection

operation once again.

Since the WL-20 / WL-20L uses a 2.4 GHz wireless system, we

recommend that you place the receiver at least three meters away

from a Wi-Fi router or other wireless device.

Using a microwave oven might also cause audio dropouts due to

wireless interference.

Using multiple wireless systems together

To prevent confusion between the wireless systems, perform the

following steps.

1. Power-o the BOSS wireless systems.

2. Power-on any wireless systems not made by BOSS,

and set them up so that there are no problems with

their sound.

DC IN 5 V port

(USB Micro-B type)

First wireless system unit made by BOSS

3. Insert the transmitter into the receiver’s

TRANSMITTER jack and execute the Auto Wireless

Connection procedure.

4. Plug the transmitter into your guitar (musical

instrument), making the BATTERY indicator light.

Second and subsequent wireless system units made by BOSS

5. Repeat steps 3 and 4.

Performing

When you plug the transmitter into your guitar (musical instrument)

and plug the receiver into your amp or eect unit, the transmitter and

receiver power-on automatically.

* To prevent malfunction and equipment failure, always turn down the

volume, and turn o all the units before making any connections.

POWER/BATTERY indicator

Lit green There is sucient remaining battery capacity.

Blinking green Standby mode.

Lit orange Battery will be exhausted in less than two hours.

Lit red Battery will be exhausted in less than 30

minutes. Please recharge.

Switches to standby mode when silence continues

5When one hour passes without you playing your guitar

(musical instrument), the transmitter enters standby mode

and ends the connection with the receiver. The BATTERY

indicator blinks green.

5 When one hour passes after the connection with the

transmitter has ended, the receiver enters standby mode.

The POWER indicator blinks green.

Note when returning from standby mode

5When you raise the volume of your guitar (musical

instrument) and play it, the transmitter returns from standby

mode in approximately two seconds.

5The receiver must be disconnected and reconnected.

When not using the system for an extended time

Unplug the transmitter and receiver. Standby mode does

consume battery power, although only very slightly.

Turning the Power O

1. Minimize the volume of your guitar (musical

instrument) and of output devices such as the

amp, and then turn o the power.

2. Unplug the transmitter from the guitar (musical

instrument).

3. Unplug the receiver.

Troubleshooting

Problem Items to check/Action

No sound when

you play the

guitar (musical

instrument)

in which the

transmitter is

inserted

Remove and reinsert the transmitter in the

guitar (musical instrument).

Is the receiver too far away from the transmitter?

Alternatively, are there obstructions between

them?

Decrease the distance between the receiver and

the transmitter.

Could you be recharging transmitter from the

DC IN 5 V port?

Disconnect the USB cable when you’re playing.

Is the transmitter’s BATTERY indicator lit?

If it is unlit, recharge the transmitter.

Is the receiver’s RECEIVE indicator lit?

If it is unlit, execute the Auto Wireless

Connection procedure.

The sound

of a dierent

guitar (musical

instrument) is heard

Could there be a dierent receiver or transmitter

nearby?

Execute the Auto Wireless Connection operation

once again.

If this does not solve the problem, it could be

that radio-frequency congestion on the 2.4 GHz

band is causing channels to conict with another

wireless system.

To reduce radio-frequency congestion, turn o

the power of any unused Wi-Fi router, Bluetooth

device, or microwave oven, and then execute the

Auto Wireless Connection operation once again.

The BATTERY

indicator blinks

red

A charging error occurred.

5If the transmitter’s internal temperature rises,

charging might pause.

This occurs in order to protect the

rechargeable lithium-ion battery. When

the internal temperature falls, the BATTERY

indicator changes to be lit orange, and

charging resumes.

5Could the ambient temperature be above

35 °C?

Charging might stop for a while in order to

protect the rechargeable lithium-ion battery.

Use the unit in the recommended ambient

temperature range of 10–30°C.

5If the indicator continues blinking red

even though you are charging in the

recommended temperature range (10–30°C)

Contact your dealer or a Roland customer

service center.

Owner’s Manual

Before using this unit, carefully read “USING THE UNIT SAFELY” and

“IMPORTANT NOTES” (the leaet “USING THE UNIT SAFELY”). After reading,

keep the document(s) where it will be available for immediate reference.

WL-20 / WL-20L

Stable wireless communication with no dropouts (Auto Wireless Connection)

Simply connect the transmitter with the receiver; the receiver scans the local state of the wireless spectrum and automatically chooses the

optimal channel.

Switches to standby mode when silence continues

When one hour passes without you playing your guitar (musical instrument), the transmitter enters standby mode and ends the connection

with the receiver. When one hour passes after the connection with the transmitter has ended, the receiver enters standby mode.

Main Specications

BOSS wireless system: WL-20 / WL-20L

RECEIVER

Wireless Format BOSS proprietary digital audio format

Wireless carrier

frequency 2.4 GHz

Compatible

Channels 14 (May vary due to local conditions)

Transmission

Range

15 meters (50 feet) line-of-sight (May vary due

to local conditions)

Latency 2.3 ms

Dynamic Range 110 dB or greater

Frequency

Response 20 Hz–20 kHz

Nominal Output

Level -10 dBu

Output Impedance 1 kΩ

Recommended

Load Impedance 10 kΩ or greater

Indicators POWER

RECEIVE

Connectors

Output plug: 1/4-inch TRS phone type

TRANSMITTER jack: 1/4-inch TRS phone type

DC IN 5 V port: USB Micro-B type

Power Supply Rechargeable lithium-ion battery

Supplied from the DC IN 5 V port

Current Draw While charging: 500 mA

Battery charging

time

Charging only the receiver: Approximately 3

hours

Charging simultaneously with the transmitter:

Approximately 4 hours

Dimensions 87 (W) x 25 (D) x 38 (H) mm

3-7/16 (W) x 1 (D) x 1-1/2 (H) inches

Weight 60 g

3 oz

Accessories

Owner’s Manual

Leaet USING THE UNIT SAFELY

Transmitter

Micro USB cable for charging (*1)

*1: Use a standard USB AC adaptor

(5 V/over 0.5 A) for charging.

* 0 dBu = 0.775 Vrms

TRANSMITTER (WL-T)

Nominal Input

Level -10 dBu

Indicator BATTERY

Connectors Input plug: 1/4-inch TRS phone type

DC IN 5 V port: USB Micro-B type

Power Supply Rechargeable lithium-ion battery

Supplied from the DC IN 5 V port

Battery charging

time

Charging only the transmitter: Approximately

3 hours

Charging simultaneously with the receiver:

Approximately 4 hours

Dimensions 87 (W) x 22 (D) x 36 (H) mm

3-7/16 (W) x 7/8 (D) x 1-7/16 (H) inches

Weight 43 g

2 oz

* 0 dBu = 0.775 Vrms

* This document explains the specications of the product at the time

that the document was issued. For the latest information, refer to the

Roland website.

https://roland.cm/wl-20_wl-20l_spec

Product specificaties

Merk:	Boss
Categorie:	Niet gecategoriseerd
Model:	WL-20
Kleur van het product:	Zwart
Soort:	Digitaal
Gebruikershandleiding:	Ja
LED-indicatoren:	Ja
Meegeleverde kabels:	USB Type-A to Micro USB-B
Levensduur accu/batterij:	12 uur
Plug and play:	Ja
USB oplaadpoort:	Ja
Aantal kanalen:	14 kanalen
Beste gebruik:	Acoustic-electric guitar, Bass guitar, Electric guitar
Receiver afmetingen (B x D x H):	87 x 25 x 38 mm
Transmissie-afstand:	15 m
Type product:	Gitaar draadloos systeem
Batterijtechnologie:	Lithium-Ion (Li-Ion)
Type batterij:	Ingebouwde accu
Ontvangerdisplay:	Nee
Draadloze synchronisatie:	Ja
Uitgang van 6,35 mm (1/4-inch):	1
Bedrijfsspanning (ontvanger):	5 V
Stroomverbuik (ontvanger) (max):	500 mA
Receiver gewicht:	60 g
Transmitter afmetingen (WxDxH):	87 x 22 x 36 mm
Transmitter gewicht:	43 g
Aantal ontvangers inbegrepen:	1
Aantal zenders inbegrepen:	1
Zenderdisplay:	Nee