Boss VO-1 Handleiding

Boss Gitaarversterker VO-1

Lees hieronder de 📖 handleiding in het Nederlandse voor Boss VO-1 (1 pagina's) in de categorie Gitaarversterker. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

Owner’s Manual

Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (supplied on a separate sheet).

After reading, keep the document(s) where it will be available for immediate reference.

Precautions When Connecting

5 To prevent malfunction and equipment failure, always turn

down the volume, and turn o all the units before making any

connections.

5 Once the connections have been completed, turn on power to

your various devices in the order specied. By turning on devices

in the wrong order, you risk causing malfunction and/or damage

to speakers and other devices.

When powering up: Turn on the power to your guitar amp last.

When powering down: Turn o the power to your guitar amp rst.

5 Immediately after the unit is powered-on, the eect is on.

Use of Battery

5 A battery was installed in the unit before it left the factory. The life

of this battery may be limited, however, since its primary purpose

was to enable testing.

5 If you handle batteries improperly, you risk explosion and uid

leakage. Make sure that you carefully observe all of the items

related to batteries that are listed in “USING THE UNIT SAFELY” and

“IMPORTANT NOTES” (supplied on a separate sheet).

5 When operating on battery power only, the unit’s indicator will

become dim when battery power gets too low. Replace the

battery as soon as possible.

5 Batteries should always be installed or replaced before connecting

any other devices. This way, you can prevent malfunction and

damage.

5 If operating this unit on battery, please use alkaline battery.

MODE Knob

Switches the vocoder mode.

MODE Explanation

VINTAGE Produces a unique vocoder eect as if you were

playing a keyboard instrument.

ADVANCED Produces a new vocoder eect with greater clarity

than VINTAGE.

TALK BOX Produces a talk-box sound without requiring a hose.

CHOIR

Automatically adds voices that are matched to your

playing, adding spaciousness and depth to your

sound. You can also use this without connecting a

mic.

COLOR Knob

Adjusts the following, depending on the mode that’s selected.

MODE Explanation

VINTAGE

ADVANCED

Turning the knob toward the left makes the eect

sound more masculine; turning it toward the right

makes the eect sound more feminine.

TALK BOX Adjusts the amount of distortion for the eect sound.

CHOIR Adjusts the character of the voices that are added.

Playing the Vocoder

While playing your guitar, vocalize into the connected mic.

* In modes other than CHOIR, you won’t hear any eect sound

unless you’re vocalizing into the mic.

Changing the Battery

1. Hold down the pedal and loosen

the thumbscrew ,

then open the pedal upward.

* The pedal can be opened without

detaching the thumbscrew completely.

2. Remove the old battery from

the battery housing , and

remove the battery snap

connected to it.

3. Connect the battery snap to the new battery, and place

the battery inside the battery housing.

* Be sure to carefully observe the battery’s polarity (+ versus -).

4. Slip the coil spring onto the spring base on the

back of the pedal, and then close the pedal.

* Carefully avoid getting the battery snap cord caught in the

pedal, coil spring, and battery housing.

5. Insert the thumbscrew into the guide bush hole and

tighten it securely.

Specications

Nominal Input Level INPUT, RETURN: -20 dBu

MIC: -40 dBu (MIC SENS: LOW)

Input Impedance INPUT, RETURN: 1 MΩ

MIC: 4 kΩ

Nominal Output

Level OUTPUT, SEND: -20 dBu

Output Impedance OUTPUT, SEND: 1 kΩ

Recommended Load

Impedance 10 kΩ or greater

Power Supply Alkaline battery (9 V, 6LR61)

AC adaptor (PSA series: sold separately)

Current Draw 70 mA

* Expected battery life under continuous use:

Alkaline: 4 hours

These gures will vary depending on the

actual conditions of use.

Dimensions 73 (W) x 129 (D) x 59 (H) mm

2-7/8 (W) x 5-1/8 (D) x 2-3/8 (H) inches

Weight 430 g / 1 lb (including battery)

Accessories Leaet (“USING THE UNIT SAFELY,” “IMPORTANT

NOTES,” and “Information”)

Alkaline battery (9 V, 6LR61)

Options

(sold separately) AC adaptor (PSA-series)

* 0 dBu = 0.775 Vrms

* This document explains the specications of the product at the

time that the document was issued. For the latest information,

refer to the Roland website.

9 V Battery

English

Main Features

Panel Descriptions

7This is a vocoder for guitar or bass that provides unique and high-impact vocoder sound just as if you were playing a keyboard instrument.

7TALK BOX mode lets you use your voice to create a variety of performance expressions without having to keep a hose gripped in your mouth; simply connect a mic and your guitar or bass.

7You can also use CHOIR mode to add spaciousness and depth to your playing without connecting a mic.

INPUT jack

Connect your guitar/bass to this jack.

* Connect your guitar/bass directly to this jack. If you want

to connect an eect unit before the VO-1, use the SEND/

RETURN jacks.

* The INPUT jack doubles as the power switch. Power to the

unit is turned on when you plug into the INPUT jack; the

power is turned o when the cable is unplugged. To prevent

unnecessary battery consumption, be sure to disconnect

the plug from the INPUT jack when not using the eects

unit.

AC Adaptor

(PSA series: optional)

LEVEL knob

Adjusts the overall volume.

BLEND knob

Adjusts the balance of the guitar/bass input sound and the eect sound.

If you’re using the RETURN jack, this knob adjusts the balance of the audio signal

that’s input to the RETURN jack and the eect sound.

TONE knob

Adjusts the brightness of the eect sound.

COLOR knob/MODE knob

* Refer to “COLOR Knob,“ “MODE Knob.“

MIC jack

Connect your mic to this jack.

Use the MIC SENS switch located beside the DC IN jack

to select the appropriate input sensitivity for your mic.

The normal setting is LOW, but you should set this to

HIGH if the sensitivity is insucient.

DC IN jack

Accepts connection of an AC Adaptor (PSA series; optional). By using an AC Adaptor, you can play without

being concerned about how much battery power you have left.

* Use only the specied AC adaptor (PSA series; optional), and connect it to an AC outlet of the correct

voltage. Do not use any other AC adaptor, since this may cause malfunction.

* If the AC adaptor is connected while a battery is installed, the power supply is

drawn from the AC adaptor.

* We recommend that you keep batteries installed in the unit even though

you’ll be powering it with the AC adaptor. That way, you’ll be able to

continue a performance even if the cord of the AC adaptor gets accidently

disconnected from the unit.

CHECK indicator

This indicator shows whether the eect is on or o, and also doubles as the battery check

indicator. The indicator lights when the eect is on.

* If you’re powering the unit with a battery and the CHECK indicator goes dim— or doesn’t

light at all—when you try to turn the eect on, the battery is near depletion and should be

replaced. For instructions on changing the battery, refer to “Changing the Battery.”

OUTPUT jack

Connect this jack to your amp or to the

input of another eect unit.

SEND/RETURN jacks

Connect the SEND jack to the input of an eect unit that you’re

using to process the audio signal of your guitar/bass.

* If you connect a distortion-type or other eect unit to the

SEND/RETURN jacks, you can perform with your preferred

guitar/bass sound heard together with the vocoder eect.

Pedal switch

This switch turns the eect on/o.

Thumbscrew

When this screw is loosened, the

pedal will open, allowing you to

change the battery.

* For instructions on changing

the battery, refer to “Changing

the Battery.”

MIC SENS

LOW HIGH

* This instrument is equipped with balanced (XLR) type jacks.

Wiring diagrams for these jacks are shown as the illustration.

Make connections after rst checking the wiring diagrams of

other equipment you intend to connect.

* This unit does not provide phantom power.

1: GND

2: HOT

3: COLD

GUITAR/BASS MIC

EFFECT OFF BYPASS OFF

Product specificaties

Merk:	Boss
Categorie:	Gitaarversterker
Model:	VO-1
Kleur van het product:	Black, Red
Gewicht:	430 g
Breedte:	73 mm
Diepte:	129 mm
Hoogte:	59 mm
Type stroombron:	AC, Battery
Accu/Batterij voltage:	1 V
Ondersteund aantal accu's/batterijen:	9
Aansluiting voor netstroomadapter:	Ja
Stroomverbruik:	70 mA
Beste gebruik:	Gitaar
Soundeffecten hoeveelheid:	1
Type product:	Expressiepedaal
Synchronisatie ingangsimpedantie:	1000000 Ohm
Output impedance:	1000 Ohm
Ingang van 6,35 mm (1/4-inch):	2
Nominale input level:	-20 dB
Status-indicatorlichtje:	Ja