Boss TU-3W Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Boss TU-3W (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 208 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Before using this unit, carefully read the sections entitled: “USING THE
UNIT SAFELY” and “IMPORTANT NOTES” (supplied on a separate sheet).
These sections provide important information concerning the proper
operation of the unit.
Additionally, in order to feel assured that you have gained a good
grasp of every feature provided by your new unit, this manual should
be read in its entirety. The manual should be saved and kept on hand
as a convenient reference.
A battery is supplied with the unit. The life of this battery may be
limited, however, since its primary purpose was to enable testing.
Main Features
TU-3W features a function that allows you to switch between
the true bypass and buffered bypass.
High Brightness mode enhances meter visibility outdoors.
Accu-Pitch Sign function uses the motion of the meter’s lights
to show when tuning is completed.
Guitar/Bass mode lets you tune by string number, with support
for 7-string guitars and 6-string basses.
Flat tuning is supported with Guitar Flat mode, which allows for
“down” tunings up to six semitones below standard pitch.
Switching on the tuner automatically mutes the output signal,
allowing you to tune without outputting the sound.
How to Use the Tuner
1. Connect the guitar or bass you want to tune to the
INPUT jack. (This switches on the power.)
2. Press the pedal switch to turn the tuner on.
The CHECK indicator will light.
3. Play a single note on your guitar or bass, and tune it.
The note name or string number closest to the tone being played
appears in the display. Tune the instrument so that both Tuning
Guide indicators are lit and the center of the meter is lit green.
(Cent display)
The meter will light farther toward the left as the pitch gets flatter,
or farther toward the right as the pitch gets sharper.
* When the Accu-Pitch Sign function is on, the meter lights stream
toward the center of the display when stable tuning at the correct pitch
is reached.
* The meter behavior described here is when the CENT display is selected
(the factory setting). The behavior is different when you've selected the
STREAM display.
* The sound from the OUTPUT jack is muted when the tuner is on.
Convenient Functions
Having the Meter Indicate Completion of
Tuning (Accu-Pitch Sign function)
When the Accu-Pitch Sign function is on, the meter lights stream
toward the center of the display when stable tuning at the correct
pitch is reached.
1. While holding down the STREAM/CENT button, turn on
the power (insert a plug into the INPUT jack).
2. Press the STREAM/CENT button again to toggle the
Accu-Pitch Sign function on/off.
On: The meter lights stream to the center from the left and right.
Off: The meter lights up at the left and right.
* The TU-3W returns to its normal state when several seconds have
elapsed without the STREAM/CENT button being pressed.
* This setting remains stored even after the power is turned off.
Changing the Reference Pitch
You can adjust the reference pitch over a range of 436-445 Hz. (440 Hz
is the factory default.)
1. Press the MODE button and STREAM/CENT button
simultaneously.
The lowest digit of the current reference pitch (e.g., “0” when set to
440 Hz) blinks in the Note Name/String indicator.
2. Press the MODE button or STREAM/CENT button to
change the reference pitch.
MODE button: Raises the reference pitch by 1 Hz.
STREAM/CENT button: Lowers the reference pitch by 1 Hz.
* If you allow several seconds to elapse without pressing the MODE
button or STREAM/CENT button, the TU-3W will return to normal
operation.
* When you turn on the power, the current reference pitch will be
displayed for several seconds.
* This setting remains stored even after the power is turned off.
Changing the Meter’s Brightness
(High Brightness mode)
By switching the meter to High Brightness mode, you can increase its
visibility when performing outdoors.
To switch to High Brightness mode, hold down the STREAM/CENT
button for two seconds or longer. To return to normal brightness, hold
down the STREAM/CENT for two seconds or longer once again.
* Normal brightness is automatically selected when you turn on the
power.
Panel Descriptions
* If you connect other effect units, you must connect them after the TU-
3W. If the TU-3W is connected after other effect units, you won't be able
to tune correctly.
1. CHECK Indicator
This indicator shows whether the effect is on or off, and also
doubles as the battery check indicator.
* If you’re powering the unit with a battery and the CHECK indicator goes
dim—or doesn’t light at all—when you try to turn the effect on, the
battery is near depletion and should be replaced. For instructions on
changing the battery, refer to “Changing the Battery.”
2. Tuning Guide Indicator
Indicates when the proper tuning is reached.
3. Meter
Indicates the tuning of the input sound’s pitch.
4. STREAM/CENT button
Switches the meter’s display pattern.
* This setting remains stored even after the power is turned off.
CENT display
The meter lights farther toward the left as the pitch gets flatter, or
farther toward the right as the pitch gets sharper. When the pitch is
correct, the center of the meter lights green.
* The center of the meter and the tuning guide indicator remain lit for
several seconds after you’ve selected this setting.
STREAM display
The meter lights stream toward the left if the input pitch is flat, or
toward the right if the input pitch is sharp.
The lights flow more slowly as the pitch discrepancy decreases,
and stop flowing when the pitch is exact.
* The meter lights stream toward the left for several seconds after you've
selected this setting.
5. Note Name/String Number Indicator
Indicates the note name, string number, or reference pitch.
Note indicator
6. MODE Button
The tuning mode changes each time you press the MODE button.
The meter lights at the position of the currently selected mode.
* When you turn on the power, the current tuning mode will be displayed
for several seconds.
* This setting remains stored even after the power is turned off.
In this example, the Tuning mode is set to GUITAR.
7. INPUT Jack
Connect the guitar or bass guitar to be tuned here.
* The INPUT jack doubles as the power switch. Power to the unit is turned
on when you plug into the INPUT jack; the power is turned off when the
cable is unplugged.
8. OUTPUT Jack
Connect an effects processor, guitar amp, or other such device
here.
* The output is muted when the tuner is on.
9. BYPASS Jack
Connect an effects processor, guitar amp, or other such device
here.
This jack will always output the signal from the instrument
connected to the Input jack.
Use this jack if you want to be heard while you tune.
10. Pedal Switch
This switch turns the effect on/off.
11. Thumbscrew
When this screw is loosened, the pedal will open, allowing you to
change the battery.
For instructions on changing the battery, refer to “Changing the
Battery.”
12. DC OUT Jack
When an AC adapter is used, you can connect a PCS-20A parallel
DC cord (optional) to supply power to effects processors and other
PSA adaptor-compatible gear.
* Power cannot be supplied from the DC OUT jack when the TU-3W is
running on batteries.
13.DC IN Jack
Accepts connection of an AC Adaptor (PSA series: optional). By
using an AC Adaptor, you can play without being concerned about
how much battery power you have left.
* Use only the specified AC adaptor (PSA series), and connect it to an AC
outlet of the correct voltage. Do not use any other AC adaptor, since
this may cause malfunction.
* We recommend that you keep batteries installed in the unit even if
you’ll be powering it with the AC adaptor. That way, you’ll be able to
continue a performance even if the cord of the AC adaptor gets
accidently disconnected from the unit.
14.OUTPUT BUF/THRU Switch
Switches between true bypass and buffered bypass.
Precautions When Connecting
* To prevent malfunction and/or damage to speakers or other devices,
always turn down the volume, and turn off the power on all devices
before making any connections.
* Some connection cables contain resistors. When connection cables
with resistors are used, the sound level may be extremely low, or
impossible to hear. For information on cable specifications, contact the
manufacturer of the cable.
* If you’ll be using the TU-3W for an extended time, we recommend that
you use an AC adaptor.
* Once the connections have been completed, turn on power to your
various devices in the order specified. By turning on devices in the
wrong order, you risk causing malfunction and/or damage to speakers
and other devices.
When powering up: Turn on the power to your guitar amp last.
When powering down: Turn off the power to your guitar amp first.
* This unit is equipped with a protection circuit. A brief interval (a few
seconds) after power up is required before the unit will operate
normally.
* When operating on battery power only, the unit’s indicator will become
dim when battery power gets too low. Replace the battery as soon as
possible.
Changing the Battery
When the indicator goes dim or no longer lights while the effect is on,
it means that the battery must be replaced.
Replace the battery following the steps below.
* Please be sure to read the separate sheet "USING THE UNIT SAFELY" and
“IMPORTANT NOTES” for details on battery handling.
* Batteries should always be installed or replaced before connecting any
other devices. This way, you can prevent malfunction and damage.
1. Hold down the
pedal and loosen
the thumbscrew,
then open the
pedal upward.
* The pedal can be
opened without
detaching the
thumbscrew completely.
2. Remove the old
battery from the
battery housing, and remove the snap cord connected
to it.
3. Connect the snap cord to the new battery, and place
the battery inside the battery housing.
* Be sure to carefully observe the battery’s polarity (+ versus -).
4. Slip the coil spring onto the spring base on the back of
the pedal, and then close the pedal.
* Carefully avoid getting the snap cord caught in the pedal, coil spring,
and battery housing.
5. Finally, insert the thumbscrew into the guide bush
hole and fasten it securely.
Storefront Demo Display
1. While holding down the STREAM/CENT button and
Pedal switch, turn the power on (insert a plug into the
INPUT jack).
The storefront display appears.
The storefront display remains until you turn the TU-3W’s power
off and then on again, or until you press the Pedal switch.
Specifications
TU-3W: Chromatic Tuner
* Duration of continuous use with battery operation:
These figures will vary depending on the actual conditions of use.
* The battery that was supplied with the unit is for temporary
use, intended primarily for testing the unit’s operation.
English
Owner’s Manual
* 5 1 0 0 0 5 0 1 9 7 - 0 1 *
Pitch is flat Pitch is in tune Pitch is sharp
Mode Explanation Indicator Status
Chromatic Lets you tune all twelve chromatic
steps of the octave. The note name is
displayed.
Chromatic
flat
Lets you tune one semitone lower
(b) or two semitones lower (2).
Guitar Lets you tune by guitar string
numbers. The guitar string
number is displayed.
(7th string is displayed
as “7.”)
Guitar flat
Lets you tune one semitone lower
(b) or anywhere from two to six
semitones lower (2-6).
Bass Lets you tune by bass string
numbers. The bass string number
is displayed. (Hi-C string
is displayed as “C,” Lo-B
string is displayed as
“b.”)
Bass flat
Lets you tune one semitone lower
(b) two semitones lower (2), or
three semitones lower (3).
Parallel DC Cord (PCS-20A: optional)
T
o PSA adaptor compatible devices
such as compact effect units
Guitar Amplifier
Electric Guitar
(Electric Bass)
AC Adaptor
(PSA series: optional)
1
2
3
8
9
10
11
45
6
7
12 13
14
C D BAGE F C#
(Dot LED lit)
Guitar
Chromatic at
( , 2)
ChromaticBass at
( –3) Bass
Guitar at
( –6)
Tuning Range C0 (16.35 Hz)–C8 (4,186 Hz)
Reference Pitch A4 = 436-445 Hz (1 Hz step)
Tuning Accuracy ±1 cent
Nominal Input Level -20 dBu
Input Impedance 1 MΩ
Nominal Output Level -20 dBu
Output Impedance 1 kΩ
Recommended Load
Impedance 10 kΩ or greater
Power Supply Carbon-zinc battery (9 V, 6F22)/Alkaline battery (9 V,
6LR61), AC Adaptor (sold separately)
Current Draw 60 mA (DC 9 V)
110 mA (DC 9 V,
when High Brightness mode is on
)
Dimensions 73 (W) x 129 (D) x 59 (H) mm
2-7/8 (W) x 5-1/8 (D) x 2-3/8 (H) inches
Weight 460 g
1 lb 1 oz (including battery)
Accessories
Owner’s Manual, Leaflet (“USING THE UNIT SAFELY,”
“IMPORTANT NOTES,” and “Information”), Alkaline
battery (9 V, 6LR61)
Options AC adaptor: PSA series
Parallel DC cord: PCS-20A
Battery
When the tuner is
continuously on
When the tuner is on for one
minute and off for three minutes
When High
Brightness
mode is off
When High
Brightness
mode is on
When High
Brightness
mode is off
When High
Brightness
mode is on
Carbon 0.5 hours 0.2 hours 1 hour 0.5 hours
Alkaline 6 hours 3 hours 6.5 hours 6 hours
Thumbscrew Pedal
Spring Base
Coil Spring
Guide Bush
Hole
Battery Housing
Battery Snap
Cord
Battery
Snap
9V Battery
Copyright © 2016 ROLAND CORPORATION


Product specificaties

Merk: Boss
Categorie: Niet gecategoriseerd
Model: TU-3W
Kleur van het product: Zwart
Gewicht: 460 g
Breedte: 73 mm
Diepte: 129 mm
Hoogte: 59 mm
Type stroombron: AC, Battery
Accu/Batterij voltage: 9 V
Ondersteund aantal accu's/batterijen: 1
Aansluiting voor netstroomadapter: Ja
Stroomverbruik: 50 mA
Beste gebruik: Gitaar
Type product: Expressiepedaal
Synchronisatie ingangsimpedantie: 1000000 Ohm
Uitgang van 6,35 mm (1/4-inch): 1
Output impedance: 1000 Ohm
Ingang van 6,35 mm (1/4-inch): 2
Uitgangsniveau: -20/0 dB
Nominale input level: -20 dB
Status-indicatorlichtje: Ja

Heb je hulp nodig?

Als je hulp nodig hebt met Boss TU-3W stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Boss

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd