Boss GP-10GK Handleiding

Boss Niet gecategoriseerd GP-10GK

Lees hieronder de 📖 handleiding in het Nederlandse voor Boss GP-10GK (20 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 227 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/20

DeutschEnglish Français Italiano Español Português Nederlands

Before using this unit, carefully read the sections entitled “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (separate sheet “Read Me First” and Owner’s Manual p. 15). These

sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every

feature of your new unit, read the Owner’s Manual in its entirety. This manual should be saved and kept on hand as a convenient reference.

Owner’s Manual (this document)

Read this rst. It explains the basic things you need to know in order to use the GP-10.

PDF Manual (download from the Web)

• Parameter Guide

This explains the parameters and audio signal ow of the GP-10.

• Sound List

This is a list of the sounds built into the GP-10.

• MIDI Implementation

This is detailed information about MIDI messages.

To obtain the PDF manual

1. Enter the following URL in your computer.

http: //www.roland.com/manuals/

2. Choose “GP-10” as the product name.

Owner’s Manual

Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Turning the Power On/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Initial Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Specifying the Output System (Sys: Output) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Setting Up the GK Pickups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Basic Operation Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Modeling/Poly FX/Alternate Tuning Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Modeling Settings (Mdl: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Electric Guitar (EG: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Acoustic (AC: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Bass (EB: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Synthesizer (Synth: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Poly FX (PolyFx: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Alternate Tuning Settings (AltTune: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

12-String Guitar Settings (12Str: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

String Bend Function Settings (StrBend: ) . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Other Modeling Settings (Mdl: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Eects/Patch Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Eects Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Preamp (Amp: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

FX (FX: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Wah (Wah: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Chorus (Chorus: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Delay (Delay: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Reverb (Reverb: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

EQ (EQ: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Noise Suppressor (NS: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Foot Volume (FV: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Settings for Normal Pickup (Nrml PU: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Volume Balance of the Modeling and the Normal Pickup (Mixer: ) . .11

FX Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Patch Settings (Patch: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Patch Volume (Patch: Level) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Patch Tempo Settings (Patch: Tempo) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

GK Set Selection for the Patch (Patch: GK Set) . . . . . . . . . . . . . . . . . . . . .11

Pedal and Switch Settings for Each Patch (Ctl: ) . . . . . . . . . . . . . . . . . . . .11

Assign Settings (Asgn 1–8: ). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

System Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Specifying the Output System (Sys: Output) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Settings of the GK Pickups (GK: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

System Settings for the Pedals and Switches (SysCtl: ) . . . . . . . . . . . . . . . . . . . .13

USB Audio Settings (USBAudio: ). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Guitar Performance MIDI Output Settings (MIDI: ) . . . . . . . . . . . . . . . . . . . . . . . .13

Tuner Settings (Tuner: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Adjusting the Display’s Contrast (Sys: Contrast) . . . . . . . . . . . . . . . . . . . . . . . . . .14

Panel Lock Settings (Sys: Knob Lock) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Auto O Settings (Sys: Auto O) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Limiting the Patches Selectable in the Play Screen (Sys: Patch Extent) . . . . .14

Adjusting the Expression Pedal (Calibration) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Restoring the Factory Settings (Factory Reset) . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Patch Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Exchanging Patches (Exchange) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Inserting a Patch (Insert) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Initializing a Patch (Initialize) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

USING THE UNIT SAFELY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

IMPORTANT NOTES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Error Message List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Main Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Cutting-edge modeling guitar powered by COSM

The GP-10 provides a wide range of modeling guitars powered by COSM technology, including Stratocaster, Telecaster, Les Paul, Jazz Guitar, Acoustic Guitar, and Sitar. In

addition, it can also create new dimensions of sound that are unavailable from conventional electric guitars, such as a Wide Range model that gives you a fat sound while

preserving the wide range of a single-coil pickup, and a Bright Humbucker model that keeps the rich mid- and low-range of a humbucker while oering a crisp high end.

A variety of alternate tunings

You can choose from alternate tunings such as Drop-D, Open-G, and D-MODAL. Without swapping guitars or changing the string tension, you can instantly switch between

a wide variety of alternate tunings. There’s also a 12-string guitar mode. You can even use “USER” to specify your own tuning.

Powerful eects and amp modeling

High quality eects and amp modeling are built in. There is also a dedicated “Poly FX” specically for the GK pickup, which allows you to extract an independent string

signal for each string. This lets you experience completely new sounds that were impossible for a guitar of the past, equipped with a conventional pickup.

EXP 2/CTL 3, 4 jack (Connecting to External Pedals)

Connections

OUTPUT jacks

Connect these jacks to

your guitar amp or to PA

(LINE).

* If your system is monaural,

use only the L/MONO jack.

USB ( ) port

Use a commercially available USB 2.0 cable to connect this port to your

computer. It can be used to transfer USB MIDI and USB audio data. You must

install the USB driver before connecting the GP-10 to your computer.

Download the USB driver and the GP-10 special software from the Roland

website. For details, refer to Readme.htm which is included in the download.

http: //www.roland.com/support/

AUX IN jack

Use a stereo mini-plug cable

to connect your audio player

here.

* To adjust the input level of the

AUX IN jack, adjust the volume

of the connected device (audio

player, etc.).

PHONES jack

Connect a set of headphones (sold

separately) here.

* When you connect a stereo-mini plug

to this jack, the internal guitar amp

simulator will be automatically on so

that you can also enjoy the powerful

guitar sound with your

headphones. In this case,

the sound from OUTPUT

jacks will have the same

eect.

* To prevent malfunction and equipment failure, always turn down the volume, and turn o all the units before making any connections.

DC IN jack

Connect the included AC

adaptor here.

* Use only the included

AC adaptor. Using any

other adaptor may cause

overheating and malfunction.

Turning the Power On/O

This turns the power on/o.

* After you’ve made connections correctly, be sure to turn on

the power in the order of the GP-10 rst, and then the

connected system. Powering-on in the incorrect order may

cause malfunctions or damage. When turning the power o,

power-o the connected system rst, and then the GP-10.

* This unit is equipped with a protection circuit. A brief interval (a

few seconds) after turning the unit on is required before it will

operate normally.

* Before turning the unit on/o, always be sure to turn the

volume down. Even with the volume turned down, you might

hear some sound when switching the unit on/o. However, this

is normal and does not indicate a malfunction.

Auto O function

The power to this unit will be turned o automatically after a

predetermined amount of time has passed since it was last used

for playing music, or its buttons or controls were operated (Auto

O function).

If you do not want the power to be turned o automatically,

disengage the Auto O function (p. 14).

* Any settings that you are in the process of editing will be lost

when the power is turned o. If you have any settings that you

want to keep, you should save them beforehand.

* To restore power, turn the power on again.

If you connect an expression pedal (sold separately: Roland EV-5, FL-500H/L) or footswitch (sold separately: FS-5U, FS-6) to the EXP 2/CTL 3,4 jack, you can use a pedal to

control the volume or to turn eects on/o.

For details on the settings, refer to “Pedal and Switch Settings for Each Patch (Ctl: )” (p. 11), “System Settings for the Pedals and Switches (SysCtl: )” (p. 13).

POLARITY switch

When Connecting an FS-5U When Connecting Two FS-5Us When Connecting an FS-6When connecting EV-5

Cable:

Stereo 1/4” phone type

1/4” phone type x 2

MODE/POLARITY switch

Cable:

1/4” phone type

Ctl 3 Ctl 4 Ctl 3 Ctl 4 Ctl 3Exp 2

Connect the GK-compatible

guitar only with dedicated GK

cable (supplied with Roland GK-

compatible devices and optional

GK cables). Use of any other

cable may result in damage or

malfunction.

To prevent the inadvertent disruption

of power to your unit (should the plug

be pulled out accidentally), and to avoid

applying undue stress to the DC IN jack,

anchor the power cord using the cord hook,

as shown in the illustration.

Security slot ( )N

http: //www.kensington.

com/

GUITAR IN jack

Use this control if you’re directly inputting a conventional guitar.

* If you use a 1/4” phone plug to make connections, the modeling and alternate tuning functions will

not operate. Only the eect functions will operate.

GUITAR OUT jack

Normal pickup signals of the guitar are output.

* Use only the specied

expression pedal (Roland EV-5,

FL-500H/L; sold separately).

By connecting any other

expression pedals, you risk

causing malfunction and/or

damage to the unit.

GK IN connector

Connect a guitar equipped

with a GK pickup (Roland

GK-3/GK-2A) or a GK-

compatible guitar such as the

Roland V-Guitar GC-1 to this

connector.

Cable:

Stereo 1/4” phone type

DeutschEnglish Français Italiano Español Português Nederlands

Initial Setup

Before using the GP-10 for the rst time, you’ll need to make the following initial

settings.

Basic procedure for initial setup

1. Press the [SYSTEM] button.

2. Use the [ ] [ ] buttons to select the desired parameter. Then use the K J

[VALUE] knob to edit the value.

GK1:Type

GK-3

Select a parameter

Edit the value

3. Press the [EXIT] button to return to the play screen.

MEMO

You can use the following button operations to jump to the / marks of this document + ,

(p. 13–).

Buttons Jump destination Buttons Jump destination

[SYSTEM] Next mark Next mark+[ ] + [ ] J K , +

[EXIT] + [SYSTEM] Previous mark Previous mark+[ ] + [ ] K J , +

* [ ] + [ ] mean that you should “hold down [ ] and press [ ].”J K J K

Specifying the Output System (Sys: Output)

Choose “Sys: Output,” and specify the device (amp) that’s connected to the OUTPUT

jacks.

Sys:Output

LINE/PHONES

* If headphones are connected, this will automatically be “LINE/PHONES” regardless

of the Output setting.

Value Explanation

LINE/PHONES This is the appropriate setting when using headphones, or for when the

GP-10 is connected to a keyboard amp, mixer, or digital recorder.

JC-120 Choose this setting if the GP-10 is connected to the guitar input of a Roland

JC-120 guitar amp.

SMALL AMP Choose this setting if the GP-10 is connected to a small guitar amp.

COMBO AMP

Choose this setting if the GP-10 is connected to the guitar input of a combo-

type guitar amp (i.e., an amp that contains the amp and speaker in a single

unit) other than the JC-120. Depending on the guitar amp you’re using,

using the “JC-120” setting might produce better results.

STACK AMP

Choose this setting if the GP-10 is connected to the guitar input of a stack-

type guitar amp (i.e., an amp in which the amp and speaker are separate

units).

JC-120 RETURN Choose this setting if the GP-10 is connected to the JC-120’s RETURN jack.

COMBO RETURN Choose this setting if the GP-10 is connected to the RETURN jack of a combo-

type guitar amp.

STACK RETURN

Choose this setting if the GP-10 is connected to the RETURN jack of a stack-

type guitar amp. You should also choose the “STACK RETURN” setting when

using the GP-10 with a guitar power amp and a speaker cabinet.

Setting Up the GK Pickups

GK settings are extremely important in order to play the GP-10 with the best possible

sound. You must be sure to make these settings correctly.

MEMO: GK settings

You can store three dierent sets of GK settings

(GK Setting: 1–3). If you’re switching between three

dierent guitars to use with the GP-10, you can

make separate GK settings for each guitar. If you’re

using only one guitar with the GP-10, choose “1” (the default setting).

Specifying the pickup type

Choose “GK1: Type,” and specify the type of pickup that’s installed on your guitar.”

GK1:Type

GK-3

Value Explanation Value Explanation

GK-3 PIEZO FRoland GK-3

Piezo Pickup

Fishman

GK-2A PIEZO GRoland GK-2A Graph Tech

GC-1 Roland V-Guitar GC-1 L.R. BaggsPIEZO L

PIEZO Piezo Pickup (at response) RMCPIEZO R

* A piezo pickup is a type of pickup that is mounted on the bridge of the guitar, and

uses a piezoelectric element to detect the vibrations of the strings.

* Choose “GK-2A” if you’re using a commercially available guitar that’s equipped with

GK pickup.

Specifying your guitar’s scale length

Choose “Scale,” and specify your guitar’s scale length (the distance between

the bridge and nut).

GK1:Scale

Choose “ST” for a standard Stratocaster type, or choose “LP” for a Les Paul

type. Alternatively, choose the closest value in the range of 500–660 mm.

* This parameter is not shown if you select “GC-1” as the pickup type.

Specifying the distance from the bridge

Choose “Distance 1”–”Distance 6,” and specify the distance

(mm) from the center of the pickup to the bridge saddle.

GK1:Distance 1

20.0mm

* If the pickup type is set to “GC-1” or one of the piezo-

type pickups, this setting is not necessary.

Adjusting the pickup sensitivity

What is Pickup Sensitivity?

If the distance between each string

and the GK pickup is dierent, the

volume will also be dierent. The

pickup sensitivity adjustment allows

you to compensate for this dierence

in volume.

GK-pickup “

1. Choose “Sens,” and adjust the sensitivity for the 6th string.

GK1:Sens 6

[■■■■■■■■] 50

Play the 6th string as strongly as you ever expect to play it in actual performance, and

use the [VALUE] knob to adjust the sensitivity as high as possible without allowing the

meter to reach the full-scale position.

* If the level meter reaches the full-scale position, the level is excessive. Lower the

sensitivity.

* Depending on the guitar you’re using, the level meter might reach full-scale even

if the sensitivity is at minimum. If this is the case, adjust the distance between the

divided pickup and the string so it’s somewhat greater than the recommendation.

2. In the same way, adjust the sensitivity for the 5th through 1st strings as well.

3. Check the volume balance of the six strings.

Play each of the strings 6–1 at normal strength; if a string sounds unusually loud,

lower the sensitivity of that string to minimize any discrepancy in volume between

the strings.

This completes the initial setup. Now you’re ready to play the GP-10!

GK:Setting

Check the following points before using the GP-10

Is the GK-pickup correctly installed?

• After reading the instructions in the GK-pickup Owner’s Manual, check the

installation once more.

• On the Roland website, the “How to install the GK pickup” page provides an

explanation and photos on how to attach a GK pickup. Be sure to take a look!

http: //www.roland.com/GK/

You must set the GK pickup select switch to the “MIX” position!

If the switch is set to any position other than MIX, the unit won’t operate correctly

(there will be no sound).

Roland GK-3 users Roland V-Guitar GC-1 users

You must set this to the center (MIX) position!

Product specificaties

Merk:	Boss
Categorie:	Niet gecategoriseerd
Model:	GP-10GK
Ingebouwd display:	Ja
Gewicht:	1900 g
Breedte:	251 mm
Diepte:	207 mm
Hoogte:	93 mm
Gebruikershandleiding:	Ja
Connectiviteitstechnologie:	Bedraad
Type stroombron:	AC
Inclusief AC-adapter:	Ja
Aantal USB 2.0-poorten:	1
Hoeveelheid weerkaatsingstypes:	7
Soundeffects:	Chorus, Delay, Reverberation
Hoeveelheid koortypes:	3
AUX ingang:	Ja
Bit rate:	24 Bit
Soundeffecten hoeveelheid:	95
Type beeldscherm:	LCD
Display met achtergrondverlichting:	Ja
Aantal delay-effecten:	10