Body Solid G3S Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Body Solid G3S (14 pagina's) in de categorie Fitnessapparaat. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/14
Body-Solid
®
A s s e m b l y I n s t r u c t i o n s
1
Be careful to assemble all components
in the sequence they are presented.
mm
Inch
2
S T E P
A. Attach Frame Leveler (8) to Main Base Frame (A) as shown.
Attach Main Base Frame (A) to Rear Base Frame (B) and Rear Vertical Frame (C) using:
Two 43 (3/8”x 2 3/4hex head bolt)
Two 55 (3/8” washer)
Two 51 (3/8” nylon lock nut)
and
Two 63 (3/8”x 2 3/4carriage bolt)
Two 51 (3/8” nylon lock nut)
B. Attach three End Caps (4) to Main Base Frame (A).
Attach two Foot Caps (6) to the ends of Rear Base Frame (B).
Attach End Cap (4) to the top of Rear Vertical Frame (C).
C. Attach Angled Vertical Frame (D) to Main Base Frame (A) using:
Two 43 (3/8”x 2 3/4hex head bolt)
Two 51 (3/8” nylon lock nut)
D. Attach Top Frame (E) and Flat Plate (70) to Angled Vertical Frame (D) using:
Two 42 (3/8”x 3” hex head bolt)
Two 51 (3/8” nylon lock nut)
E. Connect Top Frame (E) and Flat Plate (65) to Rear Vertical Frame (C) using:
Two 62 (3/8”x 2 1/2hex head bolt)*
*Note:
Hex head bolts (62) go into threaded housing inside Top Frame (E)
NOTE:
Finger tighten all hardware in this step. Do Not wrench tighten until end of step 4.
1
3
S T E P


Product specificaties

Merk: Body Solid
Categorie: Fitnessapparaat
Model: G3S

Heb je hulp nodig?

Als je hulp nodig hebt met Body Solid G3S stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Fitnessapparaat Body Solid

Handleiding Fitnessapparaat

Nieuwste handleidingen voor Fitnessapparaat