Bluesound Powernode 2i Handleiding
Bluesound
Audiostreamer
Powernode 2i
Lees hieronder de 📖 handleiding in het Nederlandse voor Bluesound Powernode 2i (4 pagina's) in de categorie Audiostreamer. Deze handleiding was nuttig voor 182 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/4
Owner’s Manual
Included Accessories
Welcome to Bluesound, Hi-Fi for the Wi-Fi generation.
Bluesound transforms your local digital music library by putting the music of your life right at your ngertips.
The clutter of CDs is relegated to a previous era! Your smartphone, desktop or tablet running the Bluesound App
now controls your music.
Your Bluesound music system is also a sophisticated Internet streaming device that allows you to listen to a
wide range of Internet music service providers. Bluesound also provides access to music subscription services
featuring extensive catalogs of millions of songs streamed to you over the internet in real time. TuneIn Radio
makes every radio station in the world a local station via the magic of the internet.
To take full advantage of all these Bluesound capabilities requires a robust wired or wireless home network
and a reliable high speed Internet connection, provided by a DSL or Cable modem. Internet access must be
contracted and installed by your local Internet Service Provider. For remote areas there are satellite options for
high speed internet access.
Before signing on to a music subscription or cloud service we suggest that you review your Internet service plan
and be sure you have enough internet speed and bandwidth to provide uninterrupted streaming. Most internet
service providers offer multiple plans and can help you make the best choice.
For detailed instructions on how to control your Bluesound player, visit our website at: www.bluesound.com.
120V AC Power Cord Ethernet Cable
230V AC Power Cord Mini Jack to Toslink Adaptor x 2
Wireless Music
Streaming Ampier
100-240V~50/60Hz
POWER RATING: 100-240V~50/60Hz 150W
Bluesound Internatio lna
633 anite Court, Pickering, ON Canada L1W 3K1Gr
MODEL : POWERNODE 2i
WIRELESS MUSIC STREAMING PLAYER
ANALOG IN 1 SUBW SERVICEUSB
OPTICAL IN 1
SPEAKERS
RIGHT LEFT
USB | LAN IR IN ANALOG IN 2
OPTICAL IN 2
HDMI ARC
STATUS INDICATOR
Below is a table of the LED blink codes and their corresponding descriptions.
LED BLINK CODE DESCRIPTION
Short blue flash, then red Powering up, rebooting the unit
Solid green Hotspot Mode
Flashing green Connecting to Network shares
Solid red Cannot boot; drive error
Red pulse No Internet gateway
White pulse Software update available
Solid red Upgrade mode
Alternate flashing red and green Upgrading…
Flashing blue Mute mode
Solid white Indexing
Solid blue Connected to Network – ready to use with Bluesound App
Flashing red Factory reset in progress
Solid purple Hotspot timed out
1
65 7
12 14
13
8 119 10
15
1
4
2
3
PLAY/PAUSE BUTTON: This button has multiple functions – a visual indicator of network connectivity and a PLAY/
PAUSE button. For a full listing of LED Blink Codes, please see #1 – Blink Codes. For an ungrouped Player, press
the button to Play and Pause the stream. If listening to an Internet radio stream, the Pause function will work for 30
seconds. At this point, the buffer is full and the stream will Stop. When a Player is grouped, pressing the PLAY/PAUSE
button will Mute that Player while other Players continue the stream. The Player’s LED will flash blue when muted.
+, - (VOLUME): Toggle either button to vary volume level. Volume level will not change if you press and hold either
button.
(+): Increase volume level
(-): Decrease volume level
PREVIOUS TRACK/NEXT TRACK: These buttons can be used to go back to the previous track◄◄ or skip to the
next track in your current playlist. ►►
OPTICAL IN/ANALOG IN 1: Using a 3.5mm Stereo Audio Cable (not provided), connect one end to the Analog In of
the POWERNODE 2i and the other end to the corresponding analog output of other compatible devices. The source
will show as an Analog Input 1 in the Navigation Drawer of the Bluesound app. Using an Optical to 3.5mm convertor
(included with the POWERNODE 2i), a digital optical source can also be added. This will appear as Optical Input 1 in the
Navigation Drawer.
SUBW (SUBWOOFER) OUT: A Subwoofer can also be connected directly to the POWERNODE 2i. Connect SUBW OUT
to a powered (“active”) subwoofer.
USB (TYPE A): Connect a USB mass storage device to the USB input. Typical USB mass storage devices compatible with the
POWERNODE 2i include portable flash memory devices and external hard drives (FAT32 formatted).
IR IN: An infrared extender can be connected to allow for programmable learning remotes to control volume and source
selection when a POWERNODE 2i is stored in a way that the front panel IR sensor is not visible.
OPTICAL IN/ANALOG IN 2: Using a 3.5mm Stereo Audio Cable (not provided), connect one end to the Analog In of
the POWERNODE 2i and the other end to the corresponding analog output of other compatible devices. The source
will show as an Analog Input 2 in the Navigation Drawer of the Bluesound app. Using an Optical to 3.5mm convertor
(included with the POWERNODE 2i), a digital optical source can also be added. This will appear as Optical Input 2 in the
Navigation Drawer.
SERVICE: Use the SERVICE port in conjunction with USB (Type B Mini) to initially load firmware on the Player. This is
not for consumer use. Only Authorized Bluesound Service personnel can access this USB port and SERVICE control
button.
HDMI ARC: Using an HDMI cable, connect one end to the HDMI ARC input of the POWERNODE 2i and the other end to
an ARC-enabled HDMI output on your television. You may be required to enable ARC in your TV settings. Consult your
user manual for more information. The HDMI source will appear as HDMI in the Navigation Drawer of the BluOS App.
LAN PORT: The LAN PORT connection can be used with the Ethernet cable provided. This is an optional connection
since the POWERNODE 2i can be connected to the network through a Wi-Fi connection to your router. To setup the
POWERNODE 2i using the LAN Port a Wired Ethernet connection is required. Using the Ethernet cable provided,
connect one end of the Ethernet cable to the LAN port of your wired Ethernet broadband router and the other end to the
POWERNODE 2i’s LAN port.
SPEAKERS: Connect the right speaker to the terminals marked “R+” and “R-” ensuring that “R+” is connected to the
“+” terminal on your loudspeaker and “R-” is connected to the loudspeaker’s “-” terminal. Repeat for the left speaker
using “L+” and “L-“. Use extra care to ensure that no stray wires or strands cross between posts or terminals at either
end.
AC MAINS INPUT: The POWERNODE 2i comes supplied with two separate AC power cords. Select the AC power cord
appropriate for your region. Before connecting the plug to the wall outlet, connect firmly the other end of the AC power
cord to POWERNODE 2i’s AC Mains input socket. Never force the plug into a wall outlet. An adaptor may be necessary
in certain regions. Always disconnect the plug from the wall outlet first, before disconnecting the cable from the
POWERNODE 2i’s AC Mains input socket.
FRONT PANEL HEADPHONE JACK: A 3.5mm headphone jack is located on the front of the POWERNODE 2i.
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Product specificaties
Merk: | Bluesound |
Categorie: | Audiostreamer |
Model: | Powernode 2i |
Heb je hulp nodig?
Als je hulp nodig hebt met Bluesound Powernode 2i stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Audiostreamer Bluesound
2 November 2024
2 November 2024
23 September 2024
26 Augustus 2024
15 April 2023
20 Februari 2023
15 Februari 2023
Handleiding Audiostreamer
- Audiostreamer Philips
- Audiostreamer Asus
- Audiostreamer Onkyo
- Audiostreamer Pioneer
- Audiostreamer Yamaha
- Audiostreamer Advance Acoustic
- Audiostreamer Aluratek
- Audiostreamer Amazon
- Audiostreamer Argon
- Audiostreamer Audiolab
- Audiostreamer Bose
- Audiostreamer Dane Elec
- Audiostreamer Denon
- Audiostreamer Eminent
- Audiostreamer Harman Kardon
- Audiostreamer Icy Box
- Audiostreamer Imperial
- Audiostreamer KEF
- Audiostreamer Klipsch
- Audiostreamer Konig
- Audiostreamer Lenco
- Audiostreamer Marantz
- Audiostreamer Marmitek
- Audiostreamer Muse
- Audiostreamer NAD
- Audiostreamer Naim
- Audiostreamer Nedis
- Audiostreamer Sangean
- Audiostreamer Sonos
- Audiostreamer Stereoboomm
- Audiostreamer Teac
- Audiostreamer Technics
- Audiostreamer Telestar
- Audiostreamer Teufel
- Audiostreamer Vogels
- Audiostreamer Cambridge
- Audiostreamer Bang And Olufsen
- Audiostreamer Bowers And Wilkins
- Audiostreamer Caliber
- Audiostreamer Block
- Audiostreamer Pro-Ject
- Audiostreamer Clint
- Audiostreamer Chord
- Audiostreamer Russound
- Audiostreamer Travis
- Audiostreamer Esoteric
- Audiostreamer Oehlbach
- Audiostreamer On-Hold Plus
- Audiostreamer Triangle
- Audiostreamer Logitech UE
- Audiostreamer NuPrime
- Audiostreamer WiiM
- Audiostreamer Control4
Nieuwste handleidingen voor Audiostreamer
15 November 2024
18 September 2024
20 Augustus 2024
24 Mei 2024
24 Mei 2024
24 Mei 2024
18 Mei 2024
17 Mei 2024
4 Mei 2024
4 Mei 2024