BlueShape Granite HDplus Handleiding

BlueShape Accu's camera Granite HDplus

Lees hieronder de 📖 handleiding in het Nederlandse voor BlueShape Granite HDplus (16 pagina's) in de categorie Accu's camera. Deze handleiding was nuttig voor 52 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
www.blueshape.net Printed in Malta 2017
PROFESSIONAL BROADCAST
3-STUD CAMERA BATTERIES
All models:
BG090 BG190HD
BG100HD BG190HD SPLASH
BG100HD SPLASH BG270HD
BG150 BG270HD SPLASH
BG180
USER MANUAL
Revision 1.0
- 2 -
LITHIUM-ION BATTERY PACK HANDLING PRECAUTIONS
Danger
1. Do not disassemble or modify the battery pack. The battery pack is equipped with built-in
safety/protection features. Should these features be disabled, the battery pack may leak
corrosive chemicals, overheat, emit smoke, burst and/or ignite.
2. Do not connect the positive (+) and negative (-) terminals to a metal object such as a wire.
Do not transport or store the battery pack together with metal objects such as jewellery,
hairpins, etc. In such cases, short- circuiting or over-current flow may occur causing the
battery pack to leak, overheat, emit smoke, burst and/or ignite. Metal objects such as
wires, jewellery or hairpins may generate heat if they come into contact with the battery.
3. Do not discard the battery pack into fire or heat since this may cause the insulation to melt
down and may also damage the gas release vents and other safety features possibly
leading to chemical leakage, overheating, smoke emission, bursting and/or ignition.
4. Do not use or leave the battery pack near a heat source such as a fire or a heater (> 80°C)
or in a car. If the resin separators should become damaged due to overheating, short-
circuiting may occur inside the battery pack, possibly leading to chemical leakage,
overheating, smoke emission, bursting and/or ignition of the battery pack.
5. Do not immerse the battery pack in fluids, water or seawater and do not allow it to get wet.
Otherwise, the protective features inside the battery may be damaged and abnormal
chemical reactions may occur, possibly leading to leakage, overheating, smoke emission,
bursting and/or ignition.
6. Do not recharge the battery pack near fire or in extremely hot environments. Otherwise,
hot temperatures may trigger its built-in protective features, inhibiting recharging or
damaging these built-in protective features, causing it to be charged with an excessive
current. As a result, abnormal chemical reactions may occur internally, possibly leading to
leakage, overheating, smoke emission, bursting and/or ignition.
7. To recharge the battery pack, use the battery charger specifically designed for the device
and observe the recharging conditions specified by the maker of the charger. A recharging
operation under non-conforming conditions may cause the battery pack to become
overcharged, or charged with an excessive current. Abnormal chemical reactions may
occur, possibly leading to electrolyte leakage, overheating, smoke emission, bursting
and/or ignition.
8. Do not pierce the battery pack with pointed or other sharp objects. Do not strike it with a
hammer, or step on it. Otherwise, the battery pack may become damaged and deformed
internal short-circuiting may occur, possibly leading to chemical leakage, overheating,
smoke emission, bursting and/or ignition.
9. Do not strike or throw the battery pack. An impact may cause leakage, overheating,
smoke emission, bursting and/or ignition. Moreover, if the protective features inside
become damaged, the resulting internally generated high current could lead to abnormal
chemical reactions, electrolyte leakage, overheating, smoke emission, bursting and/or
ignition.
10. Do not use an apparently damaged or deformed battery pack. Otherwise, electrolyte
leakage, overheating, smoke emission, bursting and/or ignition of the battery pack may
occur.
11. Do not directly solder the battery pack. Otherwise, heat may melt down its insulation,
damage its gas release vents or other safety features possibly leading to leakage,
overheating, smoke emission, bursting and/or ignition.
12. Do not reverse the positive (+) and negative (-) terminals. Otherwise, during recharging,
the battery pack will be reverse-charged, abnormal chemical reactions may occur, or
excessively high current may flow during discharging possibly leading to chemical
leakage, overheating, smoke emission, bursting and/or ignition.
13. The positive (+) and negative (-) terminals are arranged in a particular orientation. Do not
force the connection if you may not easily connect the battery pack terminals to the
- 3 -
battery pack charger or other equipment. Confirm that the terminals are correctly
oriented. Reversing the terminals will result in reverse charging, possibly leading to
electrolyte leakage, overheating, smoke emission, bursting and/or ignition of the battery
pack.
14. Do not use the battery pack for other purposes other than those specified. Otherwise, its
guaranteed performance will be lost and/or its service life will be shortened. Depending on
the equipment in which the battery pack is used, excessively high current may flow
through battery pack, possibly damaging it and leading to electrolyte leakage, overheating,
smoke emission, bursting and/or ignition.
15. If the battery pack leaks, and the electrolyte reaches the eyes, do not rub them. Instead,
rinse the eyes with clean running water and immediately seek medical attention. Failure to
do this may result in eye injury.
Warning
1. If recharging operation fails to complete even when a specified recharging time has
elapsed, immediately stop further recharging. Otherwise, electrolyte leakage, overheating,
smoke emission, bursting and/or ignition may occur.
2. Do not put the battery pack into a microwave oven or a pressurised container. Rapid
heating or punctured sealing may lead to electrolyte leakage, overheating, smoke
emission, bursting and/or ignition.
3. If the battery pack leaks or gives off a bad odour, remove it from any exposed flame.
Otherwise, the leaking electrolyte may catch fire, and the battery pack may emit smoke,
burst or ignite.
4. If the battery pack gives off an odour, generates heat, becomes discoloured or deformed,
or in any way appears abnormal during use, recharging or storage, immediately remove it
from the equipment or battery pack charger and stop using it. Otherwise, the problematic
battery pack may develop electrolyte leakage, overheating, smoke emission, bursting
and/or ignition.
Caution
1. Do not use or subject the battery pack to intense sunlight or hot temperatures such as in a
car in hot weather. Otherwise, electrolyte leakage, overheating and/or smoke emission
may occur. Also, its guaranteed performance will be lost and/or its service life will be
shortened.
2. The battery pack incorporates built-in safety devices. Do not use it in a location where
static electricity may be present. Otherwise, the safety devices may be damaged, possibly
leading to electrolyte leakage, overheating, smoke emission, bursting and/or ignition.
3. The guaranteed recharging temperature range is 0°C to 45°C. A recharging operation
outside this temperature range may lead to electrolyte leakage and/or overheating of the
battery pack, and may cause damage to it.
4. If electrolyte leaking from the battery pack contacts your skin or clothing, immediately
wash it away with running water. Failure to do this may result in skin inflammation.
5. Store the battery pack in a location where children cannot reach it. Also, make sure that a
child does not take out the battery pack from the battery pack charger or equipment.
6. If you find discoloration, a bad odour due to leakage, overheating and/or other
irregularities when using the battery pack for the first time return it to your supplier or
vendor.


Product specificaties

Merk: BlueShape
Categorie: Accu's camera
Model: Granite HDplus

Heb je hulp nodig?

Als je hulp nodig hebt met BlueShape Granite HDplus stel dan hieronder een vraag en andere gebruikers zullen je antwoorden