Block & Block GAMMA-50 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Block & Block GAMMA-50 (14 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/14
GAMMA-50
User M - English anual
1. INTRODUCCION
Dear client, Thank you for trust on at the time of purchasing your block&block
new GAMMA-50 lifting tower. Prior to handling, read fully and carefully this manual
and follow the safety instructions to obtain the best result using your new tower.
Use only original replacements from block&block. To do so, you should always
buy from authorized distributor. If non-original pieces were used or modications an
to the tower were made the user would lose their guarantee rights. For any other
repair or inquiry you must always indicate the serial number of your lifting tower.
To guarantee maximum security in the usage of GAMMA-50 lifting tower, you
should carry out an annual revision in an authorized service centre by block&block,
where they will check the state of the tower in general and the wires, the winch and
the lock-security in particular.
BLOCK&BLOCK reserves the right to modify the specications and the
pieces of this product without previous notice.
2. TECHNICAL INFORMATION
GAMMA-50 front load lifting tower has been designed to lift sound systems
and aluminium structures at dierent heights.
2.1- GAMMA-50 lifting tower
2.3- Maximum : 300 kg ( / 240 kg (529 lb)./ 180 kg (396 load 661 lb). lb)
2.4- Minimum load: 40 Kg (88.18 lb).
2,5- Maximum height: 6,25 m (20.5 ft).
2.6- Minimum height: 1,90 m (6.23 ft).
2.7- Base area: 2,10 1,80 m (6.88x 5.90 x ft).
2.8- Tower weight 146kg (321.87 : lb).
2.9- Construction materials:
-Steel prole of carbon of S- -J0H type manufactured according to EN 10219 y 275
EN10305.5 standards.
-Aluminium alloys proles 6082/T6, manufactured according to EN 15088, EN 755,
EN 12020-2, EN 573 standards.
2.10- System composed of four aluminium proles powered manually by a winch
with a steel wire of 6mm and guided by steel pulley with ball bearing.
2.11- Winch: 1200 kg of maximum load with automatic brake of load holding.
Declaration of conformity CE, applied standards harmoniz DIN EN 13157, EN ed
12100 I y II, machine directive 2006/42/CE.
2.12- Galvanized steel wire of 7x19+0 type manufactured according to EN
1 -1:2004, 1770 N/mm2 resistence. Wire diametre 3414 : 6 mm.
2.14- Safety mechanical triggers to block the section at dierent heights.
2.15- Safety triggers in the base to anchor the legs.
2.16- Stabilizer legs adjustable by means of threaded rod and steel plates with base
of anti-slipping rubber.
2.17- Antioxidant protection, primered with paint made of resins of epoxy and stove-
nished.
2.18- Bubble level to adjust the verticality of the tower.
2.19- Directional wheels to transport the lift folded.
2.20- Power supply ground terminal


Product specificaties

Merk: Block & Block
Categorie: Niet gecategoriseerd
Model: GAMMA-50

Heb je hulp nodig?

Als je hulp nodig hebt met Block & Block GAMMA-50 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Block & Block

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd