Blackstar LT-BOOST Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Blackstar LT-BOOST (16 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
LT-BOOST
CLASSIC BOOST
Owner’s Manual
HBK-1053 07/13
Blackstar Amplification Ltd, Beckett House, 14 Billing Road, Northampton, NN1 5A UKW,
For the latest information go to: .blackstaramps.comwww
The specifications and information in this publication are subject to change without prior notice.
Suggested Settings
32
All electrical and electronic products should be
disposed of separately from the municipal waste
stream via designated collection facilities appointed
by the government or the local authorities.
N2930
Warning!
Important safety information!
Read the following information carefully. Save all instructions
for future reference.
Do not open the equipment case. There are no user serviceable parts
in this equipment. Refer all servicing to qualied service personnel.
Unauthorised modication of this equipment is expressly forbidden by
Blackstar Amplication Limited.
Do not expose this apparatus to rain, liquids or moisture of any type.
Only use an approved Blackstar DC adapter. Unplug the DC adapter
from the mains supply when not in use.
Introduction
Thank you for purchasing this Blackstar effects pedal. Like all our
products this pedal is the result of countless hours of painstaking
Research and Development by our world-class design team.
Based in Northampton (UK), the Blackstar team are all experienced
musicians themselves and the sole aim of the development process
is to provide guitarists with products which are the ultimate tools for
self-expression.
All Blackstar products are subjected to extensive laboratory and
road testing to ensure that they are truly uncompromising in terms of
reliability, quality and above all TONE.
If you like what you hear and want to nd out more about the Blackstar
range of products please visit our website at www.blackstaramps.com.
Thanks!
The Blackstar Team
Features
The LT BOOST’s gain circuit is designed to push your guitar amp
into smooth overdrive and has been rened to ensure the maximum
delivery of your dynamics and tone.
This is an extremely î›…exible pedal and can be used into a clean amp
as a volume boost, an additional equalisation stage, or to drive your
amplier into dynamic overdrive.
English
English
54
Controls
1. Bass
The tone circuit on the LT BOOST is known as a ‘cut and boost’
circuit. As the name suggests this allows a range of frequencies to be
reduced (i.e. cut) or increased (i.e. boosted). The bass control adjusts
the amount of cut or boost that will be applied to the bass frequencies
of your tone. In the ‘12 o’clock position’ the amount of bass is neither
cut nor boosted. Turn the control left to cut the amount of bass, or
right to increase the amount of bass.
2. Treble
Similarly, the treble control adjusts the amount of cut or boost that will
be applied to the treble frequencies of your tone. In the ‘12 o’clock
position’ the amount of treble is neither cut nor boosted. Turn the
control left to cut the amount of treble, or right to increase the amount
of treble.
3. Gain
The Gain knob controls the amount of gain boost that is applied to the
guitar signal. At low levels, a boosted clean sound will be achieved
and your amp will sound more dynamic and full. As the Gain control
is increased the amplier will start to overdrive and the resulting
distortion will be rich in harmonics and compression.
4. Effect On/Off Switch
Press this switch to turn the effect on or off.
5. Effect On/Off LED
When the LED is on the pedal is on. When the LED is not on the
pedal is off.
6. Input
Plug your guitar in here. Always use a good quality screened guitar
lead. To maximise battery life unplug your cable from the pedal when
not in use.
7. Output
This output is designed to be connected either directly to the input
of your amplier or to the input of another pedal in your signal chain.
Always use a good quality screened guitar lead.
8. DC Inlet
For the input of a 9V DC adapter. Always use a Blackstar approved
9V adapter.
9. Battery Compartment
Insert a 9V PP3 battery here. When the Effect On/Off LED begins to
glow less brightly you should change the battery.
English
English


Product specificaties

Merk: Blackstar
Categorie: Niet gecategoriseerd
Model: LT-BOOST

Heb je hulp nodig?

Als je hulp nodig hebt met Blackstar LT-BOOST stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Blackstar

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd