Blackburn Dayblazer 1000 Handleiding

Blackburn Fietslamp Dayblazer 1000

Lees hieronder de 📖 handleiding in het Nederlandse voor Blackburn Dayblazer 1000 (1 pagina's) in de categorie Fietslamp. Deze handleiding was nuttig voor 5 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

Push to turn on / Cycle Modes / Hold down to turn off

Includes action camera style mount

DAYBLAZER 1000™

USB Rechargeable Front Light

Part# 7134749

The light indicator will blink when charging.

When charging is complete the light indicator with flash green.

GREEN = 100% to 75% Battery Capacity

ORANGE = 75% to 25% Battery Capacity

RED = <25% Battery Capacity

When battery capacity is 25-35 minutes or less, red indicator light will

remain on constant until light reaches 0% or turns off in the selected mode.

MAKE SURE TO FULLY CHARGE LIGHT BEFORE FIRST USE

1. Push button to power on.

2. Click to cycle modes.

3. Hold down 1 second to power off.

Light powers back on in the last mode used.

Ask your retailer for full warranty policy or visit www.blackburndesign.com/warranty

Visit us at blackburndesign.com for product updates

Potential choking hazard to children. This light is extremely WARNINGS:

bright—do not aim directly into eyes. UK ONLY: When used for cycling, this light

should be used in conjunction with a British Standard 6102/3 cycle light.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined

by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between

the equipment and receiver. • Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Shielded

interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules. Specications and designs are subject to change without any notice

or obligation on the part of the manufacturer.