Black And Decker KC1440SK Handleiding
Black And Decker
Cirkelzagen
KC1440SK
Lees hieronder de đ handleiding in het Nederlandse voor Black And Decker KC1440SK (12 pagina's) in de categorie Cirkelzagen. Deze handleiding was nuttig voor 46 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/12
KC1440SK
2
SAFETY INSTRUCTIONS
Warning! When using electric tools, the following
basic safety precautions should always be taken to
reduce the risk of fire, electric shock and personal
injury. Read all these instructions before attempting to
operate this product and save these instructions.
For safe operation:
⢠We recommend that you take appropriate measures
for the protection of hearing if the sound pressure of
85 dB (A) is exceeded.
â˘Keep the work area clean. Cluttered areas and
benches invite injuries.
â˘Consider work area environment. Do not expose
power tools or chargers to rain. Do not use power
tools in damp or wet locations. Keep work area well
lit. Do not use power tools in the presence of
flammable liquids or gases.
â˘Guard against electric shock. Avoid body contact
with earthed or grounded surfaces (e.g. pipes,
radiators, ranges, refrigerators).
â˘Keep children away. Do not let visitors touch the
tool or extension cord. All visitors should be kept
away from work area.
â˘Store idle tools. When not in use, tools and batteries
should be stored in a dry, high or locked place, out
of reach of children.
â˘Do not force the tool. It will do the job better and
more safely at the rate for which it was intended.
â˘Use the right tool. Do not force small tools or
attachments to do the job of a heavy duty tool. Do
not use tools for purposes not intended; for example,
do not use a circular saw to cut tree limbs or logs!
â˘Dress properly. Do not wear loose clothing or
jewellery as they can be caught in moving parts.
Rubber gloves and non-skid footwear are
recommended when working outdoors. Wear
protective hair covering to contain long hair.
â˘Use safety glasses. Use a face or dust mask if the
cutting operation is dusty or if using in enclosed spaces.
â˘Secure your work. Use clamps or a vice to hold your
work. It is safer than using your hand and it frees
both hands to operate the tool.
â˘Do not overreach. Keep proper footing and balance
at all times.
â˘Maintain tools with care. Keep tools sharp and
clean for better and safer performance. Follow
instructions for lubricating and changing
accessories. Keep handles dry, clean and free from
oil and grease.
â˘Remove adjusting keys and wrenches. Form the habit
of checking to see that keys and adjusting wrenches
are removed from tool before switching it on.
â˘Avoid unintentional starting. Do not carry a
tool with a finger on the switch.
â˘Stay alert. Watch what you are doing. Use common
sense. Do not operate when you are tired.
â˘Check damaged parts. Before further use of the tool,
a guard or other part that is damaged should be
carefully checked to determine that it will operate
properly and perform its intended function. Check
for alignment of moving parts, binding of moving
parts, breakage of parts, mounting and any other
conditions that may affect its operation. A guard or
other part that is damaged should be properly
repaired or replaced by an authorised service
centre unless otherwise indicated in this instruction
manual. Have defective switches replaced by an
authorised service agent. Do not use the tool if the
switch does not turn it on and off.
â˘Warning! The use of any accessory or attachment,
other than recommended in this instruction manual,
may present a risk of personal injury.
â˘Have your tool repaired by a qualified person.
Repairs should only be carried out by qualified
persons using original spare parts, otherwise
considerable danger to the user may result.
⢠This electrical appliance is in accordance with the
relevant standards.
Charger plug and cable
⢠Do not tug at the cable to pull the plug from the socket.
⢠Make sure the cable is located so that it will not be
stepped on, tripped over, or otherwise subjected to
damage or stress.
⢠Keep the cable away from heat, oil, sharp edges
and rough surfaces and always ensure it is in
good condition.
ADDITIONAL SAW AND CHARGER SAFETY
INSTRUCTIONS
â˘Danger! 240 volts are present at the charging
terminals. Do not probe with conductive objects or
you will risk an electric shock.
â˘Danger! If the energy pack case is cracked or
damaged, do not insert into the charger or you will
risk an electric shock.
⢠The charger is designed for indoor use only.
â˘Do not operate the charger if it has received a sharp
blow, been dropped, or otherwise damaged in any
way. Take it to a Black & Decker authorised repairer.
Cordless saw user manual
3
ADDITIONAL SAFETY RULES FOR CIRCULAR SAWS
When sawing
⢠Remove all nails and metal objects from the
workpiece before starting work.
⢠Do not attempt to saw extremely small workpieces.
⢠After switching OFF, never attempt to stop the saw
blade by pressing against the side of the blade.
⢠Never put the saw down on a table or work bench
unless switched OFF.
Operational protection devices
⢠The circular saw must only be used for cutting wood
or plastic.
⢠Ensure that all devices screening the saw blade are
in perfect working order.
⢠Never jam the saw blade guards.
⢠Free a jammed saw blade guard immediately and do
not use the saw if the guard is jammed.
⢠Do not remove the riving knife.
⢠The riving knife should be correctly set; the distance
between the toothed rim and the riving knife should
be max. 5 mm and the height difference between the
riving knife and the toothed rim should be max.
5 mm (fig. E).
Checking and changing the saw blade
⢠Only saw blades conforming to the specifications
contained in these operating instructions may be
used.
⢠Saw blades made of high alloy, high speed steel
(HSS steel) should not be used.
⢠Only sharp saw blades in perfect working condition
should be used; cracked or bent saw blades should
be discarded and replaced at once.
⢠Ensure that the saw blade is securely fixed and
rotates in the correct direction.
Special applications
⢠When cutting narrow workpieces (width less than
80 mm) longitudinally, use a rip fence guide (rip
fence spare part not included) along the longitudinal
edge.
⢠When sawing with the workpiece clamped tight,
devices should be used to prevent the workpiece
kicking back.
⢠When sawing circular sections of wood use a
device to hold the workpiece steady on both sides of
the saw blade to prevent slipping.
⢠Ensure that pieces of wood sawn off the workpiece
cannot be caught up by the teeth of the saw blade
and thrown in the air.
ENGLISH
â˘Never attempt to connect two chargers together.
â˘Always disconnect the supply before making or
breaking connections to the battery.
⢠Be aware that this tool is always in an operating
condition, because it does not have to be plugged
into an electrical outlet. Keep the switch control
lever in the âOffâ position when the tool is not in use
or when changing accessories.
⢠When drilling or driving screws into walls, floors
etc., check wherever âliveâ electrical wires may be
encountered. Do not touch any front metal parts of
the tool! Hold the tool only by the plastic housing.
â˘Do not store the tool in locations where the
temperature may reach or exceed 50ËC (120ËF) (such
as outside sheds or metal buildings in summer).
â˘Do not incinerate the saw even if it is severely
damaged or completely worn out. The battery pack
can explode in a fire.
⢠A small leakage of liquid from the battery cells may
occur under extreme usage, charging or
temperature conditions. This does not indicate a
failure. However, if the outer seal is broken and this
leakage gets on your skin:
⢠Wash quickly with soap and water.
⢠Neutralise with a mild acid such as lemon juice
or vinegar.
⢠If battery liquid gets into your eyes, flush them
with clean water for a minimum of 10 minutes and
seek immediate medical attention.
(Medical note: The liquid is a 25-35% solution of
potassium hydroxide.)
â˘Do not attempt to open the housing of your drill or
charger.
⢠The supply cord of the charger should not be
replaced by the customer; if the cord is damaged it
should be replaced at an authorised Black & Decker
service repair agent.
⢠Ensure that the battery pack is correct for the tool.
⢠Ensure that the outside surface of the battery pack
or tool is clean and dry before plugging into the
charger.
⢠Ensure that the battery is charged using the correct
charger provided with the tool or recommended by
the manufacturer. Incorrect use may result in a risk
of electric shock, overheating or leakage of
corrosive liquid from the battery.
â˘Do not attempt to recharge non-rechargeable
batteries.
Product specificaties
| Merk: | Black And Decker |
| Categorie: | Cirkelzagen |
| Model: | KC1440SK |
Heb je hulp nodig?
Als je hulp nodig hebt met Black And Decker KC1440SK stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Cirkelzagen Black And Decker
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
Handleiding Cirkelzagen
- Cirkelzagen Panasonic
- Cirkelzagen DeWalt
- Cirkelzagen Ferm
- Cirkelzagen Hitachi
- Cirkelzagen Makita
- Cirkelzagen Parkside
- Cirkelzagen Skil
- Cirkelzagen Triton
- Cirkelzagen Vonroc
- Cirkelzagen Worx
- Cirkelzagen Hilti
- Cirkelzagen Truper
- Cirkelzagen Fieldmann
- Cirkelzagen Mafell
- Cirkelzagen Malmbergs
- Cirkelzagen Porter-Cable
Nieuwste handleidingen voor Cirkelzagen
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022