Black And Decker AS255 Handleiding


Lees hieronder de ๐Ÿ“– handleiding in het Nederlandse voor Black And Decker AS255 (15 pagina's) in de categorie Strijkijzer. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/15
Please Read and Save this Use and Care Book
Por favor lea este instructivo antes de usar el producto
Veuillez lire et conserver ce guide dโ€™entretien et dโ€™utilisation
Steam Xpressโ„ข
Iron
Plancha
Fer
Accessories/Parts (USA/Canada)
Accesorios/Partes (EE.UU/Canadรก)
Accessoires/Piรจces (ร‰.-U./Canada)
1-800-738-0245
USA/Canada 1-800-231-9786
Mexico 01-800-714-2503
www.blackanddecker.com Model
Modelo
Modรจle
โ‘
AS255
2
1
When using your iron, basic safety precautions should always be followed,
including the following:
โ‘
READ ALL INSTRUCTIONS BEFORE USING.
โ‘Use iron only for its intended use.
โ‘To protect against a risk of electric shock, do not immerse the iron in water
or other liquid.
โ‘The iron should always be turned off (refer to "How to Use" section) before
plugging into or unplugging from an outlet. Never yank cord to disconnect
from outlet; instead grasp plug and pull to disconnect.
โ‘Do not allow cord to touch hot surfaces. Let iron cool completely before
putting away. Loop cord loosely around cord wrap when storing.
โ‘Always disconnect iron from electrical outlet when filling with or emptying
of water, and when not in use.
โ‘Do not operate iron with a damaged cord or if the iron has been dropped
or damaged. To avoid the risk of electric shock, do not disassemble the
iron, take it to a qualified serviceman for examination and repair. Or, call
the appropriate toll-free number listed on the cover of this manual. Incorrect
reassembly can cause a risk of electric shock when the iron is used.
โ‘
Close supervision is necessary for any appliance being used by or near
children. Do not leave iron unattended while connected or on an
ironing board.
โ‘
Burns can occur from touching hot metal parts, hot water, or steam.
Use caution when you turn a steam iron upside down or use the surge
of steam โ€” there may be hot water in the water tank. Avoid rapid
movement of iron to minimize hot water spillage.
SPECIAL INSTRUCTIONS
โ‘
To avoid a circuit overload, do not operate another high-wattage
appliance on the same circuit.
โ‘
If an extension cord is absolutely necessary, a 10-ampere cord should
be used. Cords rated for less amperage may overheat. Care should be
taken to arrange the cord so that it cannot be pulled or tripped over.
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS.
Soft-Touch Parts
Note: The soft-touch parts of this unit are free of natural rubber and latex.
They are safe for individuals allergic or sensitive to these materials.
POLARIZED PLUG (120V Models Only)
This appliance has a polarized plug (one blade is wider than the other). To reduce
the risk of electric shock, this plug will fit into a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to modify the plug in any way.
TAMPER-RESISTANT SCREW
Warning: This appliance is equipped with a tamper-resistant screw to prevent
removal of the outer cover. To reduce the risk of fire or electric shock, do not
attempt to remove the outer cover. There are no user-serviceable parts inside.
Repair should be done only by authorized service personnel.
Note: If the power supply cord is damaged, it should be replaced by qualified
personnel or in Latin America by an authorized service center.
How to Use
This appliance is for household use only.
GETTING STARTED
Remove any labels, stickers or tags attached to the body or soleplate of the iron.
Note: Use ordinary tap water for ironing. Do not use water processed through a
home softening system.
Important: For optimum performance, let the iron stand for 90 seconds before
beginning to iron.
IRONING WITH STEAM
Filling Water Tank
1. Open the water-fill cover (A).
2. Tilt the iron and using a clean measuring cup, pour water
into opening until the water reaches the MAX level mark
on the water tank . Do not overfill.(B)
3. Close the water-fill cover.
4. Plug in the iron. The temperature-ready light glows (C).
Tip: If unsure of a garmentโ€™s fiber, test a small area (on an
inside seam or hem) before ironing.
5. Move the dry/steam selector to the desired steam
level .(D)
6. Turn the fabric-select dial to appropriate steam setting
(between 4 and 6) for your fabric . Read garmentโ€™s label(E)
to help you determine fabric type.
โ€ข The temperature-ready light glows until it reaches the
appropriate temperature.
โ€ข It then glows on and off during ironing. This is normal.
7. When finished ironing, turn the fabric-select dial to lowest
heat setting, move the dry/steam selector to and
unplug the iron.
4
3
Product may vary slightly from what is illustrated.
1. Spray nozzle
2. Water-fill cover
3. Dry/steam selector
4. Spray button
5. Steam button
6. Temperature-ready and auto shutoff light
7. Comfort Gripโ„ข handle
8. 360ยฐ pivoting cord
9. Heel rest
10. Fabric-select dial
11. AUTO CLEANยฎbutton
12. Water tank
13. Soleplate
Steam
Spray
Dry
Symbols
๎€
๎€‚
๎€ƒ
๎€„๎€…๎€†
๎€‡
๎€ˆ
๎€‰
๎€Š
๎€‹
๎€Œ
๎€
๎€Ž
A
๎€Ž
B
๎€Ž
C
๎€Ž
D
๎€Ž
E


Product specificaties

Merk: Black And Decker
Categorie: Strijkijzer
Model: AS255

Heb je hulp nodig?

Als je hulp nodig hebt met Black And Decker AS255 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Strijkijzer Black And Decker

Handleiding Strijkijzer

Nieuwste handleidingen voor Strijkijzer