Bitspower BPTA-WDPO11DS-P5D Handleiding

Bitspower Niet gecategoriseerd BPTA-WDPO11DS-P5D

Lees hieronder de 📖 handleiding in het Nederlandse voor Bitspower BPTA-WDPO11DS-P5D (18 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/18

[ 1 ]

Accessories

1 3

BPTA-WDPO11DS-P5D

BPTA-EFW-GS

M6x32 Screw

1 SET

1 PC

8 PCS

Bitspower Sedna O11DS for LIAN

LI O11 Dynamic MINI Series (P5D)

Digital RGB PIN on 1motherboard or 2

other equipment.

motherboard

DRGB Multi Function Controller

(Not included)

BPTA-DRGBMFC

BPTA-EXAIR-GS 1 PC 53PIN/4PIN transfer 4PIN 1 PC

[ 2 ]

Th e w a te r t a nk an d p u m p

can't be disassembled! Once

d i s a s se mbl e d , the r e i s no

guarantee.

Power Supply and Pump

Pump Spec

Rated voltage：12V DC

Power consumption：20W

Maximum 󽗊ow：14.5±15% L/min

Noise：≤ 40dBA

Ambient temperature：-25~70℃

PWM：Yes

MTBF：15,000 hours

Warranty：2 years

A:Negative electrode -

B:Positive electrode +

C:Speed signal

D:Speed control signal

A B C D

Power cord

Press the button to release the

air.

It is recommended to install

the air-exhaust fitting on the

reservoir, above the water line.

It is recommended to install

the water-exhaust fitting at

the lowest point of the water

cooling system.

Re pl a c e w i t h t h e w a t e r -

exhaust part. When screwing

in the part, water will start to

discharge, it is recommended

to connect tubing beforehand

to control the water out󽗊ow.

Unscrew the top of the water-

exhaust 󽗉tting.

BP-ETWTA-EXAIR

[ 3 ]

The warranty will be void if any of the situations below happen.

Water Block

- The CPU block and the screws in it has any trace of disassemble.

- The top plate inlet and outlet ports, due to improper use of external forces, are cracked.

Radiator

- The 󽗉n of the radiator are broken or deformed due to improper use of external forces.

- The inlet and outlet of the radiator are cracked due to improper use of external forces.

Fitting

- There are signs of damage caused by instrument clamping on the 󽗉ttings.

PUMP

- Pump damage from pump operation without any liquid.

- Pump damage caused by water leak on the pump's PCB.

- Water tank has been separated from the pump.

Fan

- Fan damaged by water leak.

Choose your desired dye color and mix it with pure

distilled water. Pour the water mix into the reservoir

via the water filling hole. Once the reservoir is 90%

full, turn on the power supply for the pump to run

and let the air exit the loop. Turn off the power

supply when the reservoir is near empty. Repeat until

all the air has exited the loop.

(In order to power the pump only, connect the power

switch connector to the 24 pin cable of the power

supply. This will allow the power supply to bypass

the motherboard and make the pump work alone.)

refer toBP-WTP-J04

Product Warranty Rules

Water

Product specificaties

Merk:	Bitspower
Categorie:	Niet gecategoriseerd
Model:	BPTA-WDPO11DS-P5D
Kleur van het product:	Transparant
Breedte:	207 mm
Diepte:	317 mm
Hoogte:	66.3 mm
Geluidsniveau:	40 dB
Soort:	Koelplaat/radiatoren
Vermogen:	20 W
Maximale temperatuur (in bedrijf):	70 °C
Meegeleverde kabels:	3-pin, 4-pin
Certificering:	ASUS AURA Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome, BIOSTAR VIVID LED DJ, Razer Chroma
Luchtstroom:	0.87 m³/uur
Aantal per verpakking:	1 stuk(s)
Compatibele producten:	Lian Li O11 DYNAMIC MINI
Mean time between failures (MTBF):	15000 uur
Inclusief schroeven:	Ja
Aantal schroeven:	8
Verlichtings-led:	Ja
Geschikte locatie:	Computer behuizing
AC-ingangsspanning:	12 V
Stroomverbruik (typisch):	20 W
Bedrijfstemperatuur (T-T):	-25 - 70 °C
Spanningclassificatie:	12 V
Connectie draad:	1/4 "
Pulsbreedtemodulatie-ondersteuning:	Ja
Geluidsniveau pomp:	40 dB