Biostar A10N-8800E Handleiding

Biostar Niet gecategoriseerd A10N-8800E

Lees hieronder de 📖 handleiding in het Nederlandse voor Biostar A10N-8800E (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

How to update BIOS?

There are three ways to update the BIOS:

BIOS Update Utility, BIOS Online Update Utility and BIOS Flasher.

BIOS update utility

1. Installing BIOS Update Utility from the DVD Driver.

2. Download the proper BIOS from www.biostar.com.

tw .

3. Open BIOS Update Utility and click the Update

BIOS button on the main screen.

4. A warning message will show up to request your

agreement to start the BIOS update. Click Yes to start

the update procedure.

5. Choose the location for your BIOS le in the system.

Please select the proper BIOS le, and then click on

Open. It will take several minutes, please be patient.

6. After the BIOS Update process is nished, click on

OK to reboot the system.

7. While the system boots up and the full screen logo shows up, please press the

<Delete> key to enter BIOS setup.

After entering the BIOS setup, please go to the Save & Exit, using the Restore

Defaults function to load Optimized Defaults, and select Save Changes and Reset to

restart the computer. Then, the BIOS Update is completed.

Backup BIOS

Click the Backup BIOS button on the main screen for

the backup of BIOS, and select a proper location for

your backup BIOS le in the system, and click Save.

Online Update Utility

1. Installing BIOS Update Utility from the DVD

Driver.

2. Please make sure the system is connected to

the internet before using this function.

3. Open BIOS Update Utility and click the Online

Update button on the main screen.

4. An open dialog will show up to request your

agreement to start the BIOS update. Click Yes to

start the online update procedure.

5. If there is a new BIOS version, the utility will ask

you to download it. Click Yes to proceed.

6. After the download is completed, you will be

asked to program (update) the BIOS or not. Click

Yes to proceed.

7. After the updating process is nished, you will

be asked you to reboot the system. Click OK to

reboot.

8. While the system boots up and the full screen logo shows up, press <Delete>

key to enter BIOS setup.

After entering the BIOS setup, please go to the Save & Exit, using the Restore

Defaults function to load Optimized Defaults, and select Save Changes and Reset to

restart the computer. Then, the BIOS Update is completed.

BIOSTAR BIOS asher

BIOSTAR BIOS Flasher is a BIOS ashing utility providing you an easy and simple

way to update your BIOS via USB pen drive.

1. This ulity only allows storage device with FAT32/16 format and single paron.

2. Shung down or reseng the system while updang the BIOS will lead to system boot

failure.

The BIOSTAR BIOS Flasher is built in the BIOS ROM. To enter the utility, press <F12>

during the Power-On Self Tests (POST) procedure while booting up.

Updating BIOS with BIOSTAR BIOS Flasher

1. Go to the website to download the latest BIOS le for the motherboard.

2. Then, copy and save the BIOS le into a USB ash (pen) drive.

3. Insert the USB pen drive that contains the BIOS le to the USB port.

4. Power on or reset the computer and then press <F12> during the POST process.

5. After entering the POST screen, the BIOS-

FLASHER utility pops out. Choose [fs0] to search for

the BIOS le.

6. Select the proper BIOS le, and a message asking

if you are sure to ash the BIOS le. Click Yes to start

updating BIOS.

7. A dialog pops out after BIOS ash is completed,

asking you to restart the system. Press the [Y] key to

restart system.

8. While the system boots up and the full screen logo shows up, press <Delete>

key to enter BIOS setup.

After entering the BIOS setup, please go to the Save & Exit, using the Restore Defaults

function to load Optimized Defaults, and select Save Changes and Reset to restart the

computer. Then, the BIOS Update is completed.

All the informaon and content above about the soware are subject to be changed

without noce. For beer performance, the soware is being connuously updated. The

informaon and pictures described above are for your reference only. The actual informaon

and sengs on board may be slightly dierent from this manual.

Product specificaties

Merk:	Biostar
Categorie:	Niet gecategoriseerd
Model:	A10N-8800E
Breedte:	170 mm
Diepte:	170 mm
Frequentie van processor:	2.1 GHz
Processorfamilie:	AMD FX™
Processormodel:	8800P
Aantal processorkernen:	4
Ethernet LAN:	Ja
Meegeleverde kabels:	SATA
Aantal USB 2.0-poorten:	2
VGA (D-Sub)poort(en):	1
Aantal HDMI-poorten:	1
Aantal Ethernet LAN (RJ-45)-poorten:	1
Aantal poorten USB 3.2 Gen 1 (3.1 Gen 1) Type A:	2
Processor socket:	NA (geïntegreerde CPU)
Processorfabrikant:	AMD
Audio-uitgangskanalen:	8.0 kanalen
Snelle installatiehandleiding:	Ja
Ethernet interface type:	Gigabit Ethernet
Geheugen slots type:	DIMM
Audiochip:	Realtek ALC887
Meegeleverde drivers:	Ja
Grafische adapter-familie:	AMD
Geheugen kanaal:	Dubbelkanaals
Ondersteunde opslagstationinterfaces:	M.2, SATA III
PS/2 poort(en):	2
Component voor:	PC
LAN controller:	Realtek RTL8111H
Aantal SATA III connectors:	2
Non-ECC:	Ja
Compatibele processors:	AMD Athlon FX
Ondersteunde geheugen types:	DDR4-SDRAM
Processorgeneratie:	6th Generation AMD FX™ Series
Moederbord chipset familie:	AMD
Moederbord form factor:	mini ITX
Supported memory clock speeds:	2133 MHz
Aansluiting voor CPU koeler:	Ja
USB 2.0 aansluitingen:	2
USB 3.2 Gen 1 (3.1 Gen 1)-aansluitingen:	2
Seriële port via interne header:	Ja