BeSafe iZi Kid X3 i-Size Handleiding

BeSafe Autostoel iZi Kid X3 i-Size

Lees hieronder de 📖 handleiding in het Nederlandse voor BeSafe iZi Kid X3 i-Size (82 pagina's) in de categorie Autostoel. Deze handleiding was nuttig voor 57 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/82
a
f
a
b
b
c
d
g
e
e
h
d
a b
c
i
l
k
m
4 5
6
7
9
10
8
11 12
j
1
2 3
90
95
100
104
108
113
118
123
128
132
137
143
147
156
161
167
8
13
18
23
28
34
39
44
49
55
61
66
71
76
80
85
USER MANUAL
UN regulation no. R129
i-Size
Stature height 61 - 105 cm
Rearfacing
Max. weight 18 kg
Age 6m - 4y
8 9
! Vital information
• It is NOT ALLOWED to mount the seat in a front passenger seat
WITH AN ACTIVATED AIRBAG.
• iZi Kid i-Size can only be installed rearfacing with the ISOfix
anchorage in a car equipped with ISOfix anchorage points.
• iZi Kid i-Size is approved for children with a stature height from 61
to 105 cm, rearfacing with a max. weight up to 18 kg.
• Read the car list to find out whether your car model is approved to use the seat.
• The harness straps must always be locked when the child is in the seat.
• The harness straps must be tightened without slack and not twisted.
• The shoulder pads contain magnets. Magnets can influence electronic
equipment such as pacemakers.
• The floor support must always be used. Make sure that the floor support is fully
pushed down until it touches the floor of the vehicle in front of the seat and that
the indicators on the floor support are always showing green.
• We recommend that this seat is used only for children who can sit upright, so
not younger than 6 months.
• For children under 1 year and/or under 10 kg weight, we recommend that the
most reclined sitting position and the body hugger and baby cushion (extra
available accessory) are used.
• Remove the baby cushion (extra available accessory) when the child is older
than 1 year.
• Remove the body hugger when the child is older than 2 years.
• When the child weighs over 18 kg or the shoulder height grows above the
highest position of the shoulder straps, the child must change to a seat, suitable
for children with a weight above 18 kg.
• After an accident, the seat must be replaced. Although it may look undamaged,
if you were to have another accident, the seat may not be able to protect your
child as well as it should.
• Prevent the seat from becoming trapped or weighed down by luggage, seats
and/or slamming doors.
• Before every use, make sure the harness is not damaged or twisted.
• Make sure you can fit no more than one finger between the harness and your
baby (1 cm).
• DO NOT attempt to dismantle, modify or add any part to the seat. Warranty will
be void if non-original parts or accessories are used.
• Never leave your child unattended in the seat.
• Make sure all passengers are informed about how to release your child in case
of emergency.
• Make sure luggage or other objects are properly secured. Unsecured luggage
13 14
21
28
27
30 31
29
17
20
22
24 25
26
23
15
18
16
SIP+
19
Thank you for choosing BeSafe iZi Kid i-Size
! It is important that you read this user manual BEFORE installing your seat.
Incorrect installation could endanger your child.
10 11
4. When mounting in the front seat of the vehicle, adjust the back rest into an
upright position.
5. Positioned in the front seat of the vehicle, you should position the seat against
the dashboard.
6. If it’s not possible to position the seat against the dashboard, position the seat
as far as possible from the dashboard.
7. Find the ISOfix anchorage points in the vehicle. (4)
8. If your vehicle is not equipped with ISOfix insertion clips insert these to make
installation easier. (5)
9. ISOfix insertion clips are underneath the base.
10. Install the front brace by sliding the two pins into the oval tube under the
front side of the seat. Move the front brace inwards with the ratchet. The
ratchet is used to adjust the front brace in both directions. Slide the switch on
the ratchet up or down to change direction. (6)
11. Pull both ISOfix connectors as far out as possible, by pushing the grey buttons
on top of the base. (7)
12. Remove the caps from the ISOfix connectors by pressing down the ISOfix
release buttons. (8)
13. Click the installation clips on the ISOfix connectors. (9)
14. Fold down the floor support before you install the seat in your vehicle. (10)
15. Place the seat sideways into the car with the front brace towards you.
16. Turn the seat into the right position (with the front brace against the
back rest).
17. Click the ISOfix connectors in the ISOfix anchorage of the vehicle. (11)
18. Remove the installation clips.
19. Make sure that all indicators on both sides are green. (12)
20. Push the seat towards the backrest of vehicle seat till the frontbrace touches
the backrest; the isofix arms slide in and will click into a new position. (13)
21. Move the front brace outwards with the ratchet. Continue tightening until the
brace is pressed well into the back rest of the vehicle seat. (14)
22. Remove the cap around the floor support. An alarm sound will start and stop
when the seat is installed correctly with the floor support in contact with the
floor of the vehicle seat. (15)
23. Adjust the floor support so it is in contact with the floor of the vehicle. (16)
24. The height indicator of the floor support shows green when the floor support
is in contact with the floor. (17)
25. The alarm sound stops when the floor support shows green and is in contact
with the floor.
26. Positioned in the back seat of the vehicle, you should, if possible, push the
front seat of the vehicle backwards, so that it is in contact with the child seat.
If it is not possible to obtain contact with the child seat, push the back rest of
the front seat of the vehicle forward as far as possible.
27. When the child has a stature height of 87 cm. or more, use the seat in the
upright position.
28. When you want to enlarge the available space for your child, keep the isofix
arms totally slided out without pushing the seat towards the backrest, and
tension the frontbrace outwards with the rachet.
29. Make sure the floor support is fully pushed down, in contact with the floor of
the vehicle, and locked.
30. Make sure that all indicators on both sides are green.
31. The seat is delivered with removable SIP+ (side impact protection +). This extra
side impact protection should be used on the doorside of the vehicle. It can be
connected by slotting between the seatshell and the fabric. The seat already
oers high level integrated side impact protection. This extra side impact
protection improves the protection in the side impact still further. (Not on all
models) (18) Do not use the SIP+ on the seat when the space between seat
and door of the vehicle is too small, which might lead to a situation were the
seat is not positioned correctly on the vehicle seat.
Removing the seat
1. If the seat is installed in the back seat of the vehicle, push the front seat of the
vehicle forward as much as possible.
2. Move the front brace inwards with the ratchet. (19)
3. Release the ISOfix connectors by pressing the release mechanism on the ISOfix
connectors. (20)
4. Push the switch on each side and push the ISOfix connectors into the base. (21)
5. Pull the seat back towards the front. Turn the seat so you can easily remove
the seat.
6. Remove the insertion clips from the vehicle. Place them under the base of the
child seat.
7. To remove the front brace from the metal tube, move the front brace outwards
with the rachet, until the lock button of the front brace appears. Push the lock
button down with a small screw driver, while pulling the front brace out. (22)
Positioning of the child
1. Check that the shoulder strap slots are level with your child’s shoulders. (23)
2. The height of the shoulder straps and the head rest can be adjusted by pulling
the release handle upwards at the back of the head rest and pulling the head
rest up or down while keeping the head rest upright. (24)
3. Pull the shoulder straps up while pressing the button of the central
adjuster. (25)
4. Open the harness buckle. (26)
5. Position the shoulder straps over the orange marking at sides of the seat to
keep the harness open while you position the child. (27)
6. When the child is positioned, place the shoulder straps over the child’s
shoulders and close the buckle: CLICK! (28)
7. Pull the harness strap through the central adjuster in the direction of the

Product specificaties

Merk: BeSafe
Categorie: Autostoel
Model: iZi Kid X3 i-Size

Heb je hulp nodig?

Als je hulp nodig hebt met BeSafe iZi Kid X3 i-Size stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Autostoel BeSafe

BeSafe

BeSafe Go Beyond Lite Handleiding

18 Maart 2024
BeSafe

BeSafe Beyond Handleiding

18 Maart 2024
BeSafe

BeSafe Flex FIX 2 Handleiding

18 Maart 2024
BeSafe

BeSafe iZi Turn i-Size Handleiding

8 Juli 2023
BeSafe

BeSafe IZi Kid i-Size Handleiding

8 Juli 2023
BeSafe

BeSafe Stretch B Handleiding

8 Juli 2023
BeSafe

BeSafe IZi Kid X2 i-Size Handleiding

7 Juli 2023
BeSafe

BeSafe iZi Flex FIX i-Size Handleiding

7 Juli 2023
BeSafe

BeSafe IZi Sleep ISOfix Handleiding

7 Juli 2023
BeSafe

BeSafe IZi Plus Handleiding

6 Juli 2023

Handleiding Autostoel

Nieuwste handleidingen voor Autostoel

Cosatto

Cosatto Zoomi 3 i-Size Handleiding

20 Oktober 2024
Lionelo

Lionelo Izzy Handleiding

20 Oktober 2024
Cosatto

Cosatto Zoomi Handleiding

23 September 2024
Cosatto

Cosatto Axkid Minikid 4 Handleiding

23 September 2024
Cosatto

Cosatto All in All Ultra Rotate i-Size Handleiding

23 September 2024
Cosatto

Cosatto All in All 360 Rotate i-Size Handleiding

23 September 2024
Cosatto

Cosatto Acorn 2 i-Size Handleiding

23 September 2024
Mothers Choice

Mothers Choice Cherish II Handleiding

9 September 2024
Mothers Choice

Mothers Choice Drift Handleiding

9 September 2024
Mothers Choice

Mothers Choice Infinity Handleiding

9 September 2024