Bertoni Pilot Handleiding

Bertoni Autostoeltje Pilot

Lees hieronder de 📖 handleiding in het Nederlandse voor Bertoni Pilot (6 pagina's) in de categorie Autostoeltje. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

GROUP 1

(9-18 kg)

MANUAL INSTRUCTION

PILOT

CAR SEAT

IMPORTANT! KEEP FOR FURTHER REFERENCES .

READ CAREFULLY!

Note: The child restraint is only suitable for

use with lap/3-point safety belts, approved

to ECE R16 or equivalent standards.

INSTALLATION OF THE SEAT IN A CAR

RECLINE POSITION ADJUSTMENT

Note There are three feasible positions

when using the car seat in a vehicle:

upright, middle and inclined. See

To achieve that use the lever located in

front of the child restraint. Pull the lever out

and hold it at the same time pull back or

forward the sitting part of the child restraint.

When the sitting part is in desired position

release the lever. The “click” sound means

that the seat is well ﬁxed. See / Fig II / .

./ Fig I /

INSTALLATION IN THE CAR

Note: Child’s weight between 9 to 18 kg,

please make sure to use in forward facing

position.

Warning: For maximum protection install the

car seat onto the center rear seat of the vehicle.

( II )

( I )

For group I kg / 9 - 18 /

Place the car seat in forward facing position on

the seat of the car. See Fig III / / .

l Place the child seat in upright position.

l Place the child seat in forward-facing

position.

l Pull the vehicle seatbelt tight and pass

through the openings of the child seat.

l .Fasten the seatbelt and pull it tight Ensure

that the seatbelt is not twisted.

( III )

Forward - facing position

Note: Be sure to check whether the seatbelts

are snug and ﬂat, not broken and tighten

properly These must be taken on each time .

when a child is ﬁxed in the child restraint.

Note: Do not place your child in a sleeping

bag, blanket or other bulky wrapping before

putting a child in the car seat. To ensure child’s

back is evenly supported do not put more than

one nappy on the child and make sure the

nappy is not likely folded at the back.

1. Press the red button on the buckle of the

safety belt and release shoulder belts.

2. Put shoulder belts aside and place your child

into the seat.

3. Put the shoulder belts on the child’s

shoulders and insert both metal elements into

the buckle until “click” sound is heard.

4. The space between child’s body and

shoulders must be two-ﬁngers width.

5. Pull the shoulder belts to check that the

buckle is well locked.

6. To unfasten the belts press the lever on the

front part of the seat and pull the shoulder belts

out. See Fig IV / / .

PLACING YOUR CHILD INTO A CAR SEAT

Product specificaties

Merk:	Bertoni
Categorie:	Autostoeltje
Model:	Pilot

Heb je hulp nodig?

Als je hulp nodig hebt met Bertoni Pilot stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Autostoeltje Bertoni

Bertoni Uno Handleiding

31 Augustus 2023

Bertoni F1 Handleiding

31 Augustus 2023

Bertoni Pilot Handleiding

31 Augustus 2023

Handleiding Autostoeltje

Nieuwste handleidingen voor Autostoeltje

BeSafe iZi Flex S fix Handleiding

12 Oktober 2023

BeSafe Tablet and Seat Cover Handleiding

12 Oktober 2023

Jane Drive Handleiding

12 Oktober 2023

Jane Grand Handleiding

12 Oktober 2023

Jane Matrix 2 Light Handleiding

12 Oktober 2023

BeSafe combi Handleiding

12 Oktober 2023

BeSafe IZI Modular Isofix base Handleiding

12 Oktober 2023

BeSafe iZi Go X1 - 2015 Handleiding

12 Oktober 2023

Jane Koos Handleiding

12 Oktober 2023

Jane iQuartz Handleiding

12 Oktober 2023