BenQ LX60ST Handleiding

BenQ Beamers LX60ST

Lees hieronder de 📖 handleiding in het Nederlandse voor BenQ LX60ST (25 pagina's) in de categorie Beamers. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/25

Network Projector Operation Guide

Table of contents2

Table of contents

Preparation.......................................................................................3

Connecting the projector with your computer ........................................3

Wired connection...................................................................................................................... 3

Wireless connection (for selective models)........................................................................ 4

QPresenter ......................................................................................7

Minimum system requirements.....................................................................7

Downloading QPresenter...............................................................................7

Installing QPresenter .......................................................................................7

For PC .......................................................................................................................................... 7

For MAC...................................................................................................................................... 8

Using QPresenter.............................................................................................8

Controlling the projector remotely through

a web browser ............................................................................. 11

Using the web control lock..........................................................................18

Projecting computer screen contents .................................... 20

One projector displaying one computer screen .....................................20

One projector displaying screens of up to 4 computers ......................20

Up to 8 projectors displaying one computer screen .............................21

Up to 255 projectors displaying one computer screen

(for selective models) .................... ..........21......................................................

Using the USB cable to display computer content

(for selective models) .................... ..........22......................................................

Supported Resolutions ..................................................................................22

Using the Projection Login Code ..........22......................................................

Using the USB Camera (for selective models) ........................................23

PJLink Commands........................................................................ 24

Preparation 3

Preparation

Your BenQ projector is equipped with the wired and/or wireless network function. You

can manage and control the projector from one or more remote computers using a web

browser when they are properly connected to the same local area network. You can also

sent the contents of your computer to the projector for projection using the QPresenter.

Connecting the projector with your computer

Wired connection

If you are in a DHCP environment:

1. Take a RJ45 cable and connect one end to the RJ45 LAN input jack of the projector

and the other end to the RJ45 port on your Ethernet or router.

2. Do one of the following:

• Press NETWORK SETTING on the remote control. The Network

Settings page is displayed.

• Press MENU/EXIT and then press / until the SYSTEM SETUP:

Advanced menu is highlighted. Press to highlight Network Settings and

press MODE/ENTER. The Network Settings page is displayed.

3. Highlight Wired LAN and press MODE/ENTER.

4. Make sure the Status is Connect.

5. Press to highlight DHCP and press / to select On.

6. Press to highlight Apply and press MODE/ENTER.

7. Re-enter the Network Settings > Wired LAN page. The IP Address, Subnet

Mask, Default Gateway, and DNS settings will be displayed. Note down the IP

address displayed in the IP Address row.

If the IP Address still does not appear, contact your ITS administrator.

If you are in a non-DHCP environment:

1. Repeat steps 1-4 above.

2. Press to highlight DHCP and press / to select Off.

3. Contact your ITS administrator for information on the IP Address, Subnet Mask,

Default Gateway, and DNS settings.

Wired LAN

Laptop computer

Desktop computer

Projector

RJ45 cable

Product specificaties

Merk:	BenQ
Categorie:	Beamers
Model:	LX60ST
Kleur van het product:	Black, Blue, White
Ingebouwd display:	Nee
Gewicht:	5300 g
Breedte:	339 mm
Diepte:	322.8 mm
Hoogte:	236.9 mm
Geluidsniveau:	33 dB
Gewicht verpakking:	7700 g
Gebruikershandleiding:	Ja
Stroombron:	AC
Automatisch uitschakelen:	Ja
USB-connectortype:	USB Type-B
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Ja
Ondersteunde video-modi:	1080i, 1080p, 480i, 480p, 576i, 576p, 720p
Meegeleverde kabels:	AC, VGA
Geïntegreerde geheugenkaartlezer:	Nee
Zoomcapaciteit:	Ja
Snelstartgids:	Ja
Markt positionering:	Presentatie
Projector helderheid:	2500 ANSI lumens
Projectietechnologie:	DLP
Projector native resolution:	WXGA (1280x800)
Keystone correctie, verticaal:	± 15 °
Geschikt voor schermmaten:	60 - 300 "
Projectie-afstand objectief:	- m
Aantal kleuren:	1.073 biljoen kleuren
Frequentiebereik horizontaal:	31 - 102 kHz
Frequentiebereik verticaal:	23 - 120 Hz
Aantal USB 2.0-poorten:	1
VGA (D-Sub)poort(en):	3
Aantal HDMI-poorten:	1
Soort serieële aansluiting:	RS-232
Microfoon, line-in ingang:	Ja
Audio-ingang (L, R):	2
Composiet video-ingang:	1
S-Video ingang:	1
DVI-poort:	Nee
Aantal Ethernet LAN (RJ-45)-poorten:	1
Zoom type:	Handmatig
Brandpuntbereik:	5.22 mm
Levensduur van de lichtbron:	3500 uur
Type lichtbron:	Lamp
Bevestigingsmogelijkheid voor kabelslot:	Ja
Kabelslot sleuf type:	Kensington
Ingebouwde luidsprekers:	Ja
Gemiddeld vermogen:	20 W
Aantal ingebouwde luidsprekers:	2
Stroomverbruik (in standby):	1 W
Zoomverhouding:	Vast
Throw ratio:	0.36:1
Off-set:	144 procent
Formaat analoog signaal:	NTSC, PAL, SECAM
Volledige HD:	Nee
HDCP:	Nee
Digitale zoom:	2 x
Ingang stroom:	Ja
RS-232 port:	1
3D:	Ja
Lampvermogen:	230 W
Audio-uitgang:	1
Ondersteunde grafische resoluties:	1280 x 768 (WXGA), 1600 x 1200 (UXGA), 640 x 480 (VGA)
Beeldverhouding:	16:10
Contrast ratio (dynamisch):	13000:1
On Screen Display (OSD)-talen:	BUL, CHI (SIMPL), CHI (TR), CZE, DAN, DEU, DUT, ENG, ESP, FIN, FRE, GRE, HUN, INC, ITA, JPN, KOR, NOR, POL, POR, RUM, RUS, SWE, THA, TUR
Ruisonderdrukking:	Ja
On Screen Display (OSD):	Ja
Ondersteunt Windows:	Ja
Stroomverbruik (PowerSave):	160 W
Levensduur van de lichtbron (besparingsmodus):	6500 uur
Preset modes:	Cinema, Dynamic, Presentation, sRGB
Geluidsniveau (spaarzame modus):	32 dB
Afmetingen (B x D x H):	339 x 322.8 x 236.9 mm
Afstandsbediening inbegrepen:	Ja
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Stroomverbruik (typisch):	321 W
Type product:	Projector met korte projectieafstand