Bebob BS2 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Bebob BS2 (2 pagina's) in de categorie Batterij-oplader. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
bebob factory GmbH Höglwörtherstr. 350 Tel.: +49 89 27818282– – D-81379 München –
www.bebob.de
April 2020
B P -S2 ortable simultaneous li ion battery
charger
User Manual
WE STRONGLY RECOMMEND THAT YOU
READ THIS INSTRUCTION BEFORE USING
YOUR BEBOB BS2 CHARGER ! PLEASE
KEEP THIS MANUAL FOR FUTURE
REFERENCE
Features
• B- - . 2 Channel Mount simultaneous Li Ion Charger
• - – Built in AC Adapter. 16,5V 5.0A DC XLR4 Output
• 14,4V Powerbase Mode.
Charging
• Never leave batteries unattended while charging
• All Channel Status indicator show green when the charger is turned on with no battery
connected
• The Channel Status indicator turns red when a battery is placed on the corresponding channel
and the charging process has begun
• The Channel Status indicator turns back green when the battery is fully charged
• The Channel Status indicator turns Yellow when a battery is placed on the corresponding
channel and the charging process fails for damage or safety reason.
• Cooling fan will be activated during the charging process
AC Adapter
• s You can use your BS2 either as an AC Adapter or as a charger. Both function aren´t
possible simultaneously
• The charging functions always has priority
• V The AC adapter delivers up to 5,0A under 16,5
bebob factory GmbH Höglwörtherstr. 350 Tel.: +49 89 27818282– – D-81379 München –
www.bebob.de
April 2020
Powerbase
• f Plug of the AC Cord from the charger
• Place one or two full batteries on the charger
• Battery Power will be available over the XLR 4 DC Output.
• Maximum Load depends on the batteries
Safety instructions
• t Only for professional use! Keep Charger out of reach of children and personnel tha has
not been instructed in the use!
• U . se only with recommended batteries
• Keep the charger dry and do not immerse in water.
• Do not cover the charger under use
• A standard three pin AC plug must be used and earth pole must be connected to the earth line.-
• Do not keep in contact with any part of the body while the charger is in working status.
• Do not use or store the charger in unstable, dusty or damp environments.
• Remove the battery from the charger after the charging process is complete.
• Do not attempt to open or repair the charger. Contact your dealer for help if it becomes
defective.
• Handle with care! Do not throw! Do not drop!
Warranty
• The BS2 is covered by a 2 years unconditional warranty on all parts.
• For warranty issues or if you have any additional questions, please contact the appropriate
bebob distributor listed at www.bebob.de.
S pecifications
Model
BS2
Mount
B- Mount
Channel
2 simultaneous
Charging current
16,8V 2.5A
DC Output
16.5V 5.0A
DC Port
XLR4 1 minus 4 plus
AC In
90 264V/47 63Hz 100W- -
Weight
1,0 Kg
Dimensions (WXHXD)
110 x 231x 141mm
Batteries
bebob, idx, sony
Charging time (bebob VS2/VS4)
d epends on the battery capacity
Operating Temp. Range
- 10°C ~ + 35°C


Product specificaties

Merk: Bebob
Categorie: Batterij-oplader
Model: BS2

Heb je hulp nodig?

Als je hulp nodig hebt met Bebob BS2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Batterij-oplader Bebob

Handleiding Batterij-oplader

Nieuwste handleidingen voor Batterij-oplader