BeamZ F1600 Handleiding

BeamZ Niet gecategoriseerd F1600

Lees hieronder de 📖 handleiding in het Nederlandse voor BeamZ F1600 (21 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 93 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/21

F1600 Faze Machine

Ref. nr.: 160.513

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

INSTRUKCJA OBSŁUGI

V1.5

ENGLISH

Congratulations to the purchase of this Beamz product. Please read this manual thoroughly prior to using the product in order to

benet fully from all features.

Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions

to avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.

Keep the manual for future reference.

- Prior to using the product, please ask advice from a

specialist. When the unit is switched on for the rst time,

some smell may occur. This is normal and will disappear

after a while.

- The unit contains voltage carrying parts. Therefore do

NOT open the housing.

- Do not place metal objects or pour liquids into the

product. This may cause electrical shock and

malfunction.

- Do not place the product near heat sources such as

radiators, etc. Do not place the unit on a vibrating

surface. Do not cover the ventilation holes.

- The product is not suitable for continuous use.

- Be careful with the mains lead and do not damage it. A

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the product from a mains outlet,

always pull the plug, never the lead.

- Do not plug or unplug the unit with wet hands.

- If the plug and/or the mains lead are damaged, they

need to be replaced by a qualied technician.

- If the product is damaged to such an extent that internal

parts are visible, do NOT plug the unit into a mains outlet

and DO NOT switch the product on. Contact your dealer.

Do NOT connect the product to a rheostat or dimmer.

- To avoid re and shock hazard, do not expose the

product to rain and moisture.

- All repairs should be carried out by a qualied technician

only.

- Connect the product to an earthed mains outlet (220-

240Vac/50Hz) protected by a -16A fuse. 10

- During a thunderstorm or if the product will not be used

for a longer period of time, unplug it from the mains. The

rule is: Unplug it from the mains when not in use.

- If the product has not been used for a longer period of

time, condensation may occur. Let the unit reach room

temperature before you switch it on.

- Never use the product in humid rooms or outdoors.

- During operation, the housing becomes very hot. Do not

touch it during operation and immediately after.

- To prevent accidents in companies, you must follow the

applicable guide lines and follow the instructions.

- Secure the product with an extra safety chain if the unit is

ceiling mount. Use a truss system with clamps. Make

sure nobody stands in the mounting area. Mount the

eect at least 50cm away from inammable material and

leave at least 1 meter space on every side to ensure

sucient cooling.

- This product contains high intensity LEDs. Do not look

into the LED light to prevent damage to your eyes.

- Do not repeatedly switch the product on and o. This

shortens the life time.

- Keep the unit out of the reach of children. Do not leave

the unit unattended.

- Do not use cleaning sprays to clean switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice from

a specialist.

- Only operate the product with clean hands.

- Do not force the controls.

- If the product has fallen, always have it checked by a

qualied technician before you switch the product on

again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the product with a dry cloth.

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the product o prior to unplugging it from the

mains and/or other equipment. Unplug all leads and

cables prior to moving the product.

- Make sure that the mains lead cannot be damaged when

people walk on it. Check the mains lead before every use

for damages and fault s!

- The mains voltage is 220-240Vac/50Hz. Check if power

outlet match. If you travel, make sure that the mains

voltage of the country is suitable for this product.

- Keep the original packing material so that you can

transport the product in safe conditions

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient

magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should

read and adhere to.

DO NOT LOOK DIRECTLY INTO THE LENS. This can damage your eyes. Persons who are subject to epileptic attacks

should be aware of the eects that this light eect may have on them.

The product has been certied CE. It is prohibited to make any changes to the product. They would invalidate the CE certicate

and their guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and

35°C/95°F .

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your

dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.

Specications can be changed without prior notice.

prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also

invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the

warnings contained in this manual. Beamz cannot be held responsible for personal injuries caused by a disrespect of the safety

recommendations and warnings. This is also applicable to all damages in whatever form.

UNPACKING INSTRUCTION

CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are

present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if

any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing

materials. In the event that e product must be returned to the factory, it is important that the product be returned in the original th

factory box and packing.

If the device has been exposed to drastic temperature uctuation (e.g. after transportation), do not switch it on immediately. The

arising condensation water might damage your device. Leave the device switched o until it has reached room temperature.

POWERSUPPLY

On the label on the backside of the product is indicated on this type of power supply must be connected. Check that the mains

voltage corresponds to this, all other voltages than specied, the light eect can be irreparably damaged. The product must also

be directly connected to the mains and may be used. No dimmer or adjustable power supply.

Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate

electrical ground to avoid the risk of electrocution or re.

INSTALLATION

Attention:

• When smoke machine has a built-in uid tank, then should be transport and operated in an upright position.

• Use only Beamz water-based uid recommended by your dealer. Poor liquid caused permanent damage, bad eect,

clogging, spitting of unevaporated liquid etc.

• Be sure that the smoke machine is positioned on a stable, non-slip surface.

• Be sure that no ventilation slots on the product’s housing are blocked.

• Don’t put any objects on the smoke machine.

• Always install the smoke machine in an area with adequate ventilation.

• Never connect the smoke machine to a dimmer or rheostat.

• In the event of a serious operating problem, stop using the product immediately.

• When mounted at height, use the bracket and use add a safety cable.

• The installation of the smoke machine has to be built and constructed in a way that it can hold 10 times the weight for 1

hour without any harming deformation.

• The operator has to make sure that safety-relating and machine-technical installations are approved by a skilled

person once a year.

• Never aim the smoke at yourself, people or animals.

• Never aim the output nozzle directly at people or at open ames.

• The smoke machine has to be installed out of the reach of people and animals .

• Drain the tank before transporting or storing the product.

• Never drink smoke uid or use it on the inside or outside of a human body. If uid gets in contact with skin or eyes,

rinse thoroughly with water call a doctor immediately!and

• Keep out of the reach of children.

• For indoor use only.

ACCESSORIES

High quality haze uid on water basis, specially designed for Beam haze machin guarantees a trouble-free use. z es

5 liter packaging, ref. no. 160.662

1 liter packaging, ref. no. 160.660

CAUTION: Please consider the respective national norms during the

installation! The installation must only be carried out by an

authorized employee or dealers!

CAUTION: When installing the smoke machine, make sure there is no highly

in inammable material (decoration articles, etc.) in between a

distance of min. 20inch or 0.5 meter.

Product specificaties

Merk:	BeamZ
Categorie:	Niet gecategoriseerd
Model:	F1600
Kleur van het product:	Zwart, zilver
Ingebouwd display:	Ja
Gewicht:	15800 g
Breedte:	370 mm
Diepte:	600 mm
Hoogte:	250 mm
Vermogen:	1600 W
Aan/uitschakelaar:	Ja
Plaatsing:	Horizontaal
Opwarmtijd:	3 min
AC-ingangsspanning:	220 - 240 V
AC-ingangsfrequentie:	50 Hz
Type beeldscherm:	LCD
DMX-ingang:	Ja
DMX-uitgang:	Ja
Aantal DMX-kanalen:	2 kanalen
Vloeistoftank capaciteit:	3.25 l
Hoeveelheid rook uitstoot:	350 m³/min
Type DMX-connector:	XLR3
Type rookmachine:	Rookmachine
Rookrichting:	Horizontale/verticale richting