BeamZ 2-Some Handleiding

BeamZ Niet gecategoriseerd 2-Some

Lees hieronder de 📖 handleiding in het Nederlandse voor BeamZ 2-Some (9 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/9

V1.1

Light Set 2-Some Clear / Black

Ref. nr.: 3.747 15 / 153.748

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

GEBRAUCHSANLEITUNG

MANUAL DE INSTRUCCIONES

ENGLISH

Congratulations to the purchase of this Beamz Professional light eect. Please read this manual thoroughly prior to using

the unit in order to benefit fully from all features.

Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions

to avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical

shock. Keep the manual for future reference.

- Prior to using the unit, please ask advice from a

specialist. When the unit is switched on for the rst time,

some smell may occur. This is normal and will disappear

after a while.

- The unit contains voltage carrying parts. Therefore do

NOT open the housing.

- Do not place metal objects or pour liquids into the unit

This may cause electrical shock and malfunction.

- Do not place the unit near heat sources such as

radiators, etc. Do not place the unit on a vibrating

surface. Do not cover the ventilation holes.

- The unit is not suitable for continuous use.

- Be careful with the mains lead and do not damage it. A

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the unit from a mains outlet, always

pull the plug, never the lead.

- Do not plug or unplug the unit with wet hands.

- If the plug and/or the mains lead are damaged, they

need to be replaced by a qualied technician.

- If the unit is damaged to such an extent that internal

parts are visible, do NOT plug the unit into a mains outlet

and DO NOT switch the unit on. Contact your dealer. Do

NOT connect the unit to a rheostat or dimmer.

- To avoid re and shock hazard, do not expose the unit to

rain and moisture.

- All repairs should be carried out by a qualified technician

only.

- Connect the unit to an earthed mains outlet

(220- Vac/50Hz) protected by a 10-16A fuse. 240

- During a thunderstorm or if the unit will not be used for a

longer period of time, unplug it from the mains. The rule

is: Unplug it from the mains when not in use.

- If the unit has not been used for a longer period of time,

condensation may occur. Let the unit reach room

temperature before you switch it on. Never use the unit

in humid rooms or outdoors.

- During operation, the housing becomes very hot. Do not

touch it during operation and immediately after.

- To prevent accidents in companies, you must follow the

applicable guide lines and follow the instructions.

- Secure the unit with an extra safety chain if the unit is

ceiling mount. Use a truss system with clamps. Make

sure nobody stands in the mounting area. Mount the

eect at least 50cm away from inammable material and

leave at least 1 meter space on every side to ensure

sucient cooling.

- This unit contains high intensity LEDs. Do not look into

the LED light to prevent damage to your eyes.

- Do not repeatedly switch the fixture on and off. This

shortens the life time.

- Keep the unit out of the reach of children. Do not leave

the unit unattended.

- Do not use cleaning sprays to clean switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice from

a specialist.

- Only operate the unit with clean hands.

- Do not force the controls.

- If the unit has fallen, always have it checked by a

qualied technician before you switch the unit on again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the unit with a dry cloth.

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the unit o prior to unplugging it from the mains

and/or other equipment. Unplug all leads and cables

prior to moving the unit.

- Make sure that the mains lead cannot be damaged when

people walk on it. Check the mains lead before every

use for damages and faults!

- The mains voltage is -240Vac/50Hz. Check if power 220

outlet match. If you travel, make sure that the mains

voltage of the country is suitable for this unit.

- Keep the original packing material so that you can

transport the unit in safe conditions

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of

sucient magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he

should read and adhere to.

DO NOT LOOK DIRECTLY INTO THE LENS. This can damage your eyes. Persons who are subject to epileptic

attacks should be aware of the eects that this light eect may have on them.

The unit has been certied CE. It is prohibited to make any changes to the unit. They would invalidate the CE certicate

and their guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41

and 35 95°C/ °F.

Product specificaties

Merk:	BeamZ
Categorie:	Niet gecategoriseerd
Model:	2-Some
Kleur van het product:	Black, Transparent
Gewicht:	3250 g
Breedte:	430 mm
Diepte:	110 mm
Hoogte:	410 mm
Aantal lampen:	114 lampen
Soort lamp:	LED
Stroombron:	AC
Ingangsspanning:	230 V
Kleur licht:	Blue, Green, Red, White
Frequentie:	50 Hz
Stroomverbruik (typisch):	20 W
Baldiameter:	- "
Flitslichtsnelheidsbereik (flitsen per seconde):	0 - 20