BDI Mirage 8222 Handleiding

BDI Niet gecategoriseerd Mirage 8222

Lees hieronder de 📖 handleiding in het Nederlandse voor BDI Mirage 8222 (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

HIGH PERFORMANCE

FURNITURE FOR YOUR

HOME THEATER

1/2009

MirageTM

8222

Assembly Instructions

C - Removable Back Panel

x 1

A - Cabinet Assembly x 1

Mirage

™

Home Theater Furniture

Component List

www.bdiusa.com

customerservice@bdiusa.com

Your Mirage™ Home Theater Furniture is engineered for easy

assembly. Carefully follow this procedure to prevent any damage.

Placement and Maintenance

Mirage™ Home Theater Furniture is designed for indoor use on level

floors. Clean glass with glass cleaner. Clean steel parts and wood

veneer with a moist cloth.

Step 1

Unpack and identify the parts listed above.

The assembly workspace should be a non-marring surface such as

carpet. For missing hardware pieces, please contact BDI Customer

Service at: customerservice@bdiusa.com For other concerns, please

contact your BDI Retailer.

Step 2

Shelves Installation

Adjustable Shelf Pins may be repositioned, allowing you to raise

or lower the adjustable shelf to the desired level.

Install inside the left and right cabinet area. Adjustable Shelf (B)

*Note: To place the adjustable shelf inside the cabinet, the shelf may

be tilted sideways to clear the door opening.

D - Phillips Screwdriver

x 1

B - Adjustable Shelf

x 4

B - Adjustable Shelf x 4

C - Removable Back Panel

x 1

A - Cabinet Assembly

x 1

E - Allen Wrench x 1

Level your cabinet (if needed)

The adjustable leveler glides on the bottom of the cabinet

are accessible from inside the cabinet using the Allen

Wrench (E). If your floor is uneven, you may extend one or

more of the levelers (with the provided Allen Wrench (E))

to attain a level, stable cabinet placement.

Step 3

Adjust Door Hinges (if needed)

If the cabinet’s door appears out of alignment, this can be corrected with minor adjustment to the European

hinges on each door.

Because these hinges are infinitely adjustable, adjusting one hinge element can sometimes cause the need

for adjustments to other elements. But with a few adjustments, you can modify the orientation of the cabinet

door to make sure that it hangs evenly.

Use a Phillips screwdriver to adjust Mirage’s door hinges:

By adjusting

• Screw 1, the door will move LEFT or RIGHT within the frame. Make minor adjustments

at both top and bottom hinges for best results.

By adjusting • Screw(s) 2, the door will move UP or DOWN within the frame (the top and bottom

hinges must be adjusted the same degree).

By adjusting • Screw 3 the entire door will move IN or OUT, opening or closing the gap between the

door frame and cabinet. (This screw rarely needs adjustment.)

Step 4

Reverse Door-Swing (if desired)

Mirage Tower features a reversible door assembly so that you can open either from the left or the right.

To reverse the door’s orientation,

Remove the Door by actuating both of its quick-release hinges; carefully place the detached Door 1.

aside.

Using a Philips head screwdriver, remove both Hinge Plates from the interior wall of the cabinet by 2.

loosening the screws holding it in place.

Install both Hinge Plates to the opposite interior wall at the pre-determined locations. 3.

Re-install the Door by connecting each Door Hinge to the relocated Hinge Plates. 4.

Mirage Tower features an opening at the top area of the back surface that can accommodate a small fan

for the purpose of active cooling. BDI does not supply fans, but you may find several on the market which

are compatible with the size and shape of this opening.

2. 2.

Product specificaties

Merk:	BDI
Categorie:	Niet gecategoriseerd
Model:	Mirage 8222
Kleur van het product:	Zwart
Gewicht:	54431 g
Breedte:	560 mm
Diepte:	560 mm
Hoogte:	1020 mm
Verstelbare plateaus:	Ja
Inbegrepen aantal schappen:	7
Laden:	Nee