BASSBOSS AT212-MK3 Handleiding

BASSBOSS Speaker AT212-MK3

Lees hieronder de 📖 handleiding in het Nederlandse voor BASSBOSS AT212-MK3 (14 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/14

User ManUal

Dual 12” 2-Way

Powered Loudspeaker

AT212-MK3

AT212-MK3 User Manual

Table of Contents

Overview 2

QuickStartGuide 4

OutboardProcessorWarning 5

SetupProcedure 5

OperationandControls 6

IndicatorLEDs 6

HowtoUsethePresets 7

Pre-InstalledOnboardPresets 8

PowerDistribution 9

Troubleshooting 9

Specifications 10

Warranty 11

SafetyInformation 12

ImportantNotes 13

FCCComplianceNotice 13

Overview

The AT212-MK3 is a very high-output, self-powered, internally processed, bi-amplified, 2-way, broad-

range loudspeaker. The cabinet is lightweight, the setup is easy and the output is smooth with a natural,

musical character. The remarkable power and eiciency of the AT212-MK3 make it ideal for providers

who want to deliver high sound pressure levels but prefer not to move heavy cabinets.

Intended for use with a subwoofer system to complete a 3-way active full-range system, the AT212-MK3

has a tall, slim design that allows the HF horn to stand above crowds when the cabinet is stacked on

subwoofers. The light weight of the cabinet makes stacking by one person possible. The AT212-MK3

cabinets weigh only 99 lbs.

The AT212-MK3 is a vented cabinet that features two high-eiciency 12” woofers. The woofers feature

3.5” voice coils, Neodymium magnets, cast aluminum baskets and ultra-light cones. The compression

driver also features a Neodymium motor structure with a 3” voice coil. It is mated to a 1.4” throat, cast

aluminum horn. The horn is rotatable, providing 80 x 60 degree coverage for multiple applications

including ground stack and horizontal or vertical flying.

Estemanualestádisponibleenespañolennuestrositiowebenbassboss.com/support

Dual 12” 2-Way

Powered Loudspeaker

AT212-MK3

bassboss.com

The AT212-MK3 is the ultimate in plug and play, with universal voltage compatibility and no need for any

outboard gear, other than a sound source. The built-in processing features presets that allow it to run in

multiple configurations. Each preset oers advantages that suit specific applications and preferences.

Power is supplied by an amplifier that can deliver output peaks of 163V, to provide amazing dynamic

resolution and impact. The fully integrated and comprehensive digital processing ensures smooth

response and reliable operation thanks to meticulous filter alignments and five-stage limiters that

protect the drivers from excessive excursion, thermal overload and clipping. The amplifier features a

large heat sink and 2 temperature-controlled fans to ensure consistent operation, even under the most

extreme conditions.

The cones are waterproofed to protect them from accidental exposure to moisture such as rain or spilled

beverages. Weather resistant, IP65 rated power connectors, an internally sealed input section and

waterproof-treated cones are provided to allow operation where rain might be encountered.

The cabinet is built from 18mm and 15mm Birch plywood. It features an 18mm bale and 18mm top and

bottom, with 15mm sides, port walls and braces, all assembled with dado joinery. The cabinet includes

4 steel bar-handles, 4 internally braced steel M10 fly points and a 35mm (1-3/8”) cast metal pole socket.

Although the AT212 cabinet is equipped with a 35mm steel pole socket, DO NOT use this speaker on a

tripod or extension pole. This socket is to be used with a special, short section of pole to prevent it from

moving once stacked on a subwoofer.

The MK3 features an all-new DSP. The comprehensive suite of processing includes multiple presets,

each including multiple protection systems and limiters to prevent driver overload in as many ways

as possible, including thermal, excursion and clipping. There are five levels of protection that actively

prevent overheating of the voice coil, minimize long-term thermal compression and limit excursion.

Because they operate in 5 dierent modes, the limiters are sophisticated enough to have a largely

unnoticable eect on the transient response and allow the subwoofer to deliver peak output safely.

Each preset has a specific high-pass filter frequency and alignment filters that ensure it’s output is

always phase coherent with any BASSBOSS sub. No matter which preset you choose, your BASSBOSS

subs and tops will always play in harmony.

The full-range mode, Preset 1, provides response down to 50Hz (-3dB). Each successive preset filters

the lows out at higher frequencies. As low-frequency demand is reduced, higher sound levels can be

achieved, allowing the AT212-MK3 to be used above multiple subwoofers.

Not including Cardioid, there are up to 56 possible combinations when MK3 tops are used with MK3

subs, but don’t worry, all are compatible. You can’t choose a “wrong” preset, you simply choose the

combination you like best.

The new DSP features an Ethernet interface. This can be used to control the cabinets from a computer

or to load software or firmware updates. The ethernet connectivity, in conjunction with the new DSP

board, will allow signal to be sent via Milan AVB. (Firmware updates will provide access to this feature.)

Within the software, multiple cabinets can be grouped together, allowing them to respond to commands

simultaneously. This permits the levels of groups of loudspeakers to be adjusted together, and yet

independently from the levels of other groups of loudspeakers. In addition to individual and grouped

level controls, presets can be loaded and signal levels and temperatures can be monitored. Each cabinet

includes a two-port switch, so multiple cabinets can be chained on the same data cable.

The MK3 DSP features storage capacity of up to 100 presets, eight of which can be accessed at the touch

of a button with no need for a connected computer. The eight directly accessible presets are compatible

with all the presets in the MK3 Top Boxes and are also compatible with previous generation tops and

subs.

Product specificaties

Merk:	BASSBOSS
Categorie:	Speaker
Model:	AT212-MK3

Heb je hulp nodig?

Als je hulp nodig hebt met BASSBOSS AT212-MK3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Speaker BASSBOSS

BASSBOSS DV12-MK3 Handleiding

9 Juni 2024

BASSBOSS SSP218-MK3 Handleiding

29 Mei 2024

BASSBOSS DJ18-MK3 Handleiding

4 Mei 2024

BASSBOSS SSP118-MK3 Handleiding

4 Mei 2024

BASSBOSS CCM12-MK3 Handleiding

4 Mei 2024

BASSBOSS AT212-MK3 Handleiding

4 Mei 2024

BASSBOSS BB15-MK3 Handleiding

4 Mei 2024

BASSBOSS KRAKEN-MK3 Handleiding

8 April 2024

BASSBOSS DiaMon-MK3 Handleiding

8 April 2024

Handleiding Speaker

Nieuwste handleidingen voor Speaker

Kenwood KFC-PS170C Handleiding

3 December 2024

Bose DesignMax DM5P Handleiding

2 December 2024

Yamaha CHR12 Handleiding

2 December 2024

Yamaha DHR12 Handleiding

2 December 2024

Yamaha DHR15M Handleiding

2 December 2024

Yamaha CHR15M Handleiding

2 December 2024

Yamaha True X Speaker 1A WS-X1A Handleiding

2 December 2024

Yamaha Stagepas 100 Handleiding

2 December 2024

Yamaha NS-2000A Handleiding

2 December 2024

Yamaha DXS15XLF-D Handleiding

2 December 2024