Barumi EF-BM-5000 Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Barumi EF-BM-5000 (8 pagina's) in de categorie Toilet. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/8
3 STEP INSTALLATION
WHAT TO EXPECT DURING INSTALLATION
THE 3 MAIN STEPS.
REMOVE THE CURRENT TOILET SEAT
Find the bolt caps at the back of the
seat and open them if they’re closed.
Next, firmly grip the nut that is
fastened to the end of the bolt
and begin turning the bolt
counterclockwise to unfasten the
seat. In some cases, if the nut has
wings, you can turn the nut while
holding down the bolt.
Depending on your toilet seat,
you may need to use a phillips
screwdriver and a wrench.
CHECK FOR MISSING PARTS
To ensure your installation is worry-free, please make sure you have all the
necessary parts from the factory by referencing the parts list. Set each part
aside so you can easily access them during installation.
STEP 1 PREPARE!
barumiusa.com • info@barumiusa.com
TM
INSTALLATION GUIDE
CONNECT TO YOUR BATHROOM
OUTLET (BEST OPTION)
If your bathroom is equipped with a
grounded electrical outlet (GFCI), plug your
power cord into it to turn the bidet on.
OUTLET NOT AVAILABLE
If your bathroom is not equipped with a
grounded electrical outlet, an extension cord
may be used to connect the power cord to a
GFCI outlet. Please use a grounded
extension cord.
POSITIONING BRACKET
PLEASE NOTE: Your positioning bracket setup may look different from the image above.
Please make sure each screw is spaced inside the frame identically to each other.
THE POSITIONING BRACKET MUST BE INSTALLED PROPERLY
Before installing the bidet seat, it is imperative the
positioning bracket is installed first AND properly.
If this bracket is not positioned and installed
properly, your bidet seat will not be aligned with
your toilet.
STEP 2 INSTALL!
STEP 3 CONNECT!
Screw M/S
Washer
Bolt bracket
Base bracket
Rubber nut insert
Installation hole
barumiusa.com • info@barumiusa.com
TM
INSTALLATION GUIDE
INSTALLATION PROCEDURE
01
Positioning bracket
Flexible hose
T-valve
Secure bracket (2pcs) Screw M/S (2pcs)
Washer (2pcs)
Rubber insert (2pcs)
Separate water supply hose
Shut off the water valve.
Drain the toilet tank.
Disconnect the hose.
BEFORE INSTALLATION
For optimal performance, please install the product after reading the
installation manual thoroughly.
Plug in the water supply only after installation is complete.
Toilet hose
Water supply valve
1
2
3
barumiusa.com • info@barumiusa.com
TM
INSTALLATION GUIDE
Product specificaties
Merk: | Barumi |
Categorie: | Toilet |
Model: | EF-BM-5000 |
Heb je hulp nodig?
Als je hulp nodig hebt met Barumi EF-BM-5000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Toilet Barumi
17 Juli 2023
17 Juli 2023
17 Juli 2023
17 Juli 2023
Handleiding Toilet
- Toilet Philips
- Toilet IKEA
- Toilet Allibert
- Toilet Axa
- Toilet Dometic
- Toilet Enders
- Toilet Fiamma
- Toilet Geberit
- Toilet Haier
- Toilet Kogan
- Toilet Kohler
- Toilet Milwaukee
- Toilet Miomare
- Toilet Rocktrail
- Toilet Sanibroyeur
- Toilet Sanyo
- Toilet Thetford
- Toilet Tiger
- Toilet Vetus
- Toilet Camry
- Toilet Coleman
- Toilet Brondell
- Toilet Curaqua
- Toilet Duravit
- Toilet Pressalit
- Toilet Schütte
- Toilet SereneLife
- Toilet Campingaz
- Toilet Villeroy And Boch
- Toilet RIDGID
- Toilet Sunwind
- Toilet Gustavsberg
- Toilet Sloan
- Toilet TOTO
- Toilet La Playa
- Toilet Jabsco
- Toilet TMC
- Toilet Summer Infant
- Toilet PolyJohn
- Toilet American Standard
- Toilet Satellite
- Toilet Oatey
- Toilet Stimex
- Toilet MCombo
- Toilet Caroma
- Toilet Gerber
- Toilet Bemis
Nieuwste handleidingen voor Toilet
10 December 2024
5 December 2024
5 December 2024
25 November 2024
25 November 2024
24 November 2024
24 November 2024
23 November 2024
18 November 2024
16 November 2024