Barska BA11403 Handleiding

Barska Zaklamp BA11403

Lees hieronder de 📖 handleiding in het Nederlandse voor Barska BA11403 (1 pagina's) in de categorie Zaklamp. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/1
©2011 BARSKA®| La Verne, CA 91750 | USA | www.barska.com BC1916/11
1. Unscrew tail cap of flashlight. Remove battery holder from flashlight.
2. Insert 3 AAA batteries as illustrated. Make sure the negative signs (not included)
of the batteries are on the springs of the battery holder.
3. On the ends of the battery holder there is an indentation of a “+” and “-” sign. Place positive
end of battery holder into the flashlight. Screw tail cap of flashlight back on to flashlight.
· 2 levels of brightness
· Rapid strobe mode
· Zoom function
· Operates on three
AAA batteries
(not included)
- 1” Weaver mounting ring
- Wrist strap
INSTALLING BATTERIES
OPERATION
AAA AA A
AAA
1. To turn flashlight on, press and hold button firmly. You will hear a click.
2. To switch through the various lighting modes gently press the button.
Lighting modes are as follows;
- Flashlight is on: Low Light Mode
- Tap once High Light Mode
- Tap once more Rapid Strobe Mode
3. To turn flashlight off at any of the lighting modes press and hold button firmly. You will hear a
click. Flashlight is now off.
ZOOM
1. Turn flashlight on
2. Hold one end of the flashlight and slowly pull
the other half of the flashlight
MOUNTING FLASHLIGHT
1. With an Allen wrench loosen the top screws of the ring and carefully separate
the top piece of ring from the bottom half.
2. Position the tube of the flashlight in the groove of the bottom half of the ring.
3. Place the top piece of ring with screws over the top of the flashlight and
bottom half of flashlight.
4. With an Allen wrench tighten screws to join the top and bottom halves of the ring together.
Your flashlight is ready to be mounted to a firearm.
5. Loosen the lock nut located on the side of the ring, mount ring with flashlight using the
grooves of the ring to the rail of the firearm and tighten the lock nut in place.
6. To dismantle mounted flashlight, loosen lock nut and remove mounted flashlight from the rail
of firearm. Using an Allen wrench unscrew the screws from the top of the ring and remove
flashlight from ring. Place top half of ring on top of the bottom half of the ring and screw pieces
back together.
Features Includes
WARNING: USE OF FLASHLIGHT FOR AN EXTENSIVE PERIOD OF TIME WILL
CAUSE OVERHEATING. IF OVERHEATING OCCURS, TURN FLASHLIGHT OFF
AND ALLOW IT TO COOL BEFORE RE-USING.

Product specificaties

Merk: Barska
Categorie: Zaklamp
Model: BA11403

Heb je hulp nodig?

Als je hulp nodig hebt met Barska BA11403 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Zaklamp Barska

Barska

Barska BA11403 Handleiding

26 Augustus 2023
Barska

Barska BA12198 Handleiding

26 Augustus 2023

Handleiding Zaklamp

Nieuwste handleidingen voor Zaklamp

Ledlenser

Ledlenser iH8R Handleiding

31 December 2025
Cateye

Cateye Duplex SL-LD400 Handleiding

21 December 2024
Olight

Olight Warrior X 4 Handleiding

18 December 2024
Coast

Coast HP4 Handleiding

18 December 2024
Olight

Olight i3T Plus Handleiding

18 December 2024
WAGAN

WAGAN Solar + LED Floodlight 1600 Handleiding

17 December 2024
Olight

Olight Array 2S Handleiding

17 December 2024
Olight

Olight Perun Mini Handleiding

17 December 2024
Olight

Olight Baton 3 Premium Edition Handleiding

17 December 2024
Coast

Coast G23 Handleiding

17 December 2024