Barox VI-UTP-2300W Handleiding

Barox Wifi-repeater VI-UTP-2300W

Lees hieronder de 📖 handleiding in het Nederlandse voor Barox VI-UTP-2300W (2 pagina's) in de categorie Wifi-repeater. Deze handleiding was nuttig voor 53 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Application Drawing

Vi2300W Ethernet Extender over UTP Installation Manual

DO NOT OPEN

RISK OF ELECTRIC SHOCK

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK,

DO NOT REMOVE COVER. NO USER SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

IP Camera-end Installation

The Smart Choice for Transmission Solutions www.vigitron.com

ExtendersEthernet

Important Safety Warning

- When using PoE, the camera has to be powered by PoE also.

- Connect the IP camera RJ45 connector to the “Standard Ethernet” port

of Vi2300W using a standard Cat5/6 cable of maximum 100 m in length.

- Connect one end of the long UTP cable to the “Extended Ethernet” RJ45

connector of Vi2300W.

Unscrew the gasket and insert the UTP cable checking to confirm there is no

spacing between the wire and the insertion hole.

Connect the RJ45 cable and insert it into the RJ45 female connector on the

Vi2300A's body making certain the connection is tight.

Reconnect the gasket by screwing into the Vi2300W body making certain to

limit any wire slack.

IP Camera

Cat-5

Data

NVR Network Switch

Vi2300W

- Read these instructions.

- Keep these instructions.

- Follow all instructions.

- Heed all warnings.

- Do not use this apparatus near water.

- Clean only with a dry cloth.

- Install in accordance with the manufacturer’s instructions.

- This installation should be made by a qualified service person and should

conform to all local codes.

- DO NOT bundle UTP or Coax signals in the same conduit as high-voltage

wiring.

- To reduce the risk of fire or electrical shock, do not expose these products

to rain, moisture, dripping or splashing.

- No objects filled with liquids, such as vases, shall be placed on Vigitron

equipment.

- DO NOT install the unit in a place where the operating ambient tempera

ture exceeds 75° C.

- Make sure that the external power supply output voltage is in the recom

mended range.

- Do not install near any heat sources such as radiators, heat registers,

stoves or other apparatus (including DVRs) that produce heat.

- Protect the power cord from being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit from the

apparatus.

- Only use attachments/accessories specified by the manufacturer.

- Unplug this apparatus during lightning storms or when unused for long

periods of time.

- Refer all servicing to qualified service personnel. Servicing is required

when the apparatus has been damaged in any way, such as a power

supply cord or plug is damaged, liquid has been spilled, or objects have

fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

- The mains plug is used as the disconnect device and shall remain readily

operable.

WARNING! - To assure proper performance, check all gaskets to

eliminate any spacing where water can penetrate.

Up to 3,000 ft.

(914 m) UTP

The MaxiiCopper Model Vi2300W is a revolutionary data transmission

device that extends full-duplex high-speed Ethernet over existing UTP

infrastructures. It extends 10BaseT signals up to 3,000 feet (914m) and

100BaseT up to 2,100 feet (640m). It employs MaxiiCopper innovative

and unique Ethernet extension technology that is designed to take full

advantage of high-bandwidth networking cables and maintain a full-duplex

of 10 or 100 Mb/s Ethernet connection up to the maximum range with

minimum transmission error and latency.

The Vi2300W can connect multiple remote network devices, such as

Mega-pixel IP cameras or VoIP to a central LAN switching fabric with ease.

Its dual-rate capability feature provides an easy way to balance the best

possible network throughput and long-reach distance design. The Vi2300W

is a transceiver device that needs to be deployed on the camera side. It can

be used in conjunction with a Vi2301A or Vi25xx Extended Midspan. No IP

setting or configurations are required and it is completely transparent to the

corporate IP network and higher layer protocols. The UTP cable needs to be

point to point without any branches. Multiple segments can be joined

together using UTP couplers.

Ethernet Switch/NVR-end Installation

- When using PoE, the camera has to be powered by PoE also.

- Connect the RJ45 connector of the Ethernet switch to the “Standard

Ethernet” port of Vi2301A using a standard Cat5/6 cable of maximum

328 feet (100 m) in length.

- Connect one end of the long UTP cable to the “Extended Ethernet” RJ45

connector of Vi2301A.

Unscrew the gasket and insert the UTP cable checking to confirm there is no

spacing between the wire and the insertion hole.

Connect the RJ45 cable and insert it into the RJ45 female connector on the

Vi2300A's body making certain the connection is tight.

Reconnect the gasket by screwing into the Vi2300W body making certain to

limit any wire slack.

Limited Lifetime Warranty

Vigitron, Inc. warrants that all Vigitron products (“Product”), if used in accordance

with these instructions, will be free of defects in material and workmanship for

lifetime defined as the duration period of time until product end of life is announce-

ment. After which Vigitron will continue to provide warranty services for a period of 3

years. Period covering valid warranty will be determined by proof of purchase in the

form of an invoice from an authorized Vigitron dealer.

Warranty will only be provided for as long as the original end user purchaser owns

the product. Warranty is not transferrable. At Vigitron's option, defective product will

be repaired, replaced or substituted with a product of equal value. This warranty

does not apply if, in the judgment of Vigitron, Inc., the Product fails due to damage

from shipment, handling, storage, accident, abuse or misuse, or if it has been used

or maintained not conforming to Product manual instructions, has been modified, or

serial number removed or defaced. Repair by anyone other than Vigitron, Inc. or an

approved agent will void this warranty. Vigitron, Inc. shall not under any circum-

stances be liable to any person for any incidental, indirect or consequential

damages, including damages resulting from use or malfunction of the product, loss

of profits or revenues or costs of replacement goods. The maximum liability of

Vigitron, Inc. under this warranty is limited to the original purchase price of the

Product only.

RoHS

Technical Specifications*

Electrical

Ethernet Interface Standard 10/100BaseT

Ethernet Rate Auto selectable 10/100 Mb/s

UTP** 100 Ohm, 3000 feet (914 m) at 10BaseT

2,100 feet (640 m) at 100BaseT

Connectors Ethernet Interface RJ-45 Connector

Extended Interface RJ-45 Connector

Environmental

Humidity 0 to 95%, non-condensing

Temperature Operating: -40°C to +75°C

Storage: -40°C to +80°C

IP Rating Conforms to IP67

Mechanical

Dimensions 1.82 x 1.7 x 7 in (HxWxL)

46.2 x 43.2 x 177.8 mm

Weight 0.49 lbs., 220 g

Material Plastic

*Specifications subject to change without notice.

**Distance figures are obtained using in house testing mirroring installations. Factors such as cabling, connections,

use of power and environmental conditions may affect actual distances and should be taken into consideration.

TEL (+1) 858 - 484 - 5209 • FAX (+1) 858 - 484 - 1205

7810 Trade Street, Suite 100, San Diego, CA 92121, USA • support@vigitron.com • www.vigitron.com

Manual_Vi2300W_0618

RJ-45 Installation Instruction

Installing cable and connector is critical for maintaining the IP 67

performance of this product. Please follow instructions carefully.

Product specificaties

Merk:	Barox
Categorie:	Wifi-repeater
Model:	VI-UTP-2300W
Kleur van het product:	Blue, Grey
Gewicht:	230 g
Breedte:	40 mm
Diepte:	174 mm
Hoogte:	47 mm
Soort:	Netwerkzender
Internationale veiligheidscode (IP):	IP67
Ethernet LAN, data-overdrachtsnelheden:	10, 100 Mbit/s
Bekabelingstechnologie:	10/100Base-T(X)
Netwerkstandaard:	IEEE 802.3, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u
Power over Ethernet (PoE):	Ja
Maximaal bereik:	500 m
Overdrachtssnelheid:	100 Mbit/s
Bedrijfstemperatuur (T-T):	-40 - 75 °C
Ondersteundende kabel types:	Cat5e, Cat6
Aantal RJ-45-poorten (zender):	2