Barox VI-COAX-2400A Handleiding

Barox Wifi-repeater VI-COAX-2400A

Lees hieronder de 📖 handleiding in het Nederlandse voor Barox VI-COAX-2400A (2 pagina's) in de categorie Wifi-repeater. Deze handleiding was nuttig voor 55 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Application Drawing

Vi2400A Ethernet Extender over Coax Installation Manual

DO NOT OPEN

RISK OF ELECTRIC SHOCK

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK,

DO NOT REMOVE COVER. NO USER SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

IP Camera-end Installation

The Smart Choice for Transmission Solutions www.vigitron.com

The MaxiiCopper Mini Model Vi2400A is a very compact data transmission

device that extends full-duplex High-Speed Ethernet over existing coax

infrastructures. It extends 10BaseT signals up to 5,000 ft (1,524m) and

100BaseT up to 1,800 ft (548m). It can fit in most camera housings and

junction boxes. With Pass Through PoE (PTP™), it can handle up to 30W

PoE power. It employs MaxiiCopper

™

innovative and unique Ethernet

extension technology that is designed to take full advantage of

high-bandwidth networking cables and maintain a full-duplex 10 or 100Mb/s

Ethernet connection up to the maximum range with minimum transmission

error and latency. Vi2400A can connect multiple remote network devices

such as Mega-pixel IP cameras or VoIP to a central LAN switching fabric

with ease. Its automatic dual-rate capability feature balances the best

possible network throughput and long-reach distance.

The Vi2400A is a transmitter device and needs to be deployed on the

camera end. The data rate between the remote and central locations is

automatically set based on the distance. It is equipped with LEDs to provide

link status and configured data rate. No IP setting or configurations are

required and it is completely transparent to the corporate IP network and

higher layer protocols. The Coax cable needs to be point to point without

any branches and multiple segments can be joined together using barrel

connectors.

ExtendersEthernet

Important Safety Warning

- Ground the unit through the earth ground screw.

- Connect the IP camera RJ45 connector to the 10/100BaseT Ethernet port

of Vi2400A using a standard Cat5/6 cable of maximum 100 m in length.

- Connect one end of the long coax cable to the BNC connector of

Vi2400A.

The link LED on the 10/100 connector should be “ON” to indicate proper

connection between the camera and Vi2400A.

Ethernet Switch/NVR-end Installation

- Use a Vi2401A/Vi2404A/Vi2408A or Vi2416A on the receiving side.

- If using a Vi2401A set the Master/Slave dip switch to “Slave” mode and

Set the Remote/Local switch to Local.

- Connect the RJ45 connector of the Ethernet switch to the 10/100BaseT

Ethernet port of Vi2401A using a standard Cat5/6 cable of maximum

100 m in length.

- Connect one end of the long coax cable to the BNC connector of Vi24xxA.

The link LED on the 10/100 Ethernet connector should be “ON” to indicate

proper connection between the switch and Vi24xxA. Also the Traffic LED

on the Coax side should be on and flashing to indicate proper connection.

While the Link LED, Orange for 100BaseT and Green for 10BaseT, in a

steady state will indicate confirmed connection between extenders.

IP Camera

Up to 5,000 ft.

(1,515 m) Coax

Cat-5

Data

NVR Network Switch

Vi2400A

Vi2401A

- Read these instructions.

- Keep these instructions.

- Heed all warnings.

- Follow all instructions.

- Do not use this apparatus near water.

- Clean only with a dry cloth.

- Install in accordance with the manufacturer’s instructions.

- This installation should be made by a qualified service person and should

conform to all local codes.

- DO NOT bundle UTP or Coax signals in the same conduit as high-voltage

wiring.

- To reduce the risk of fire or electrical shock, do not expose these products

to rain, moisture, dripping or splashing.

- No objects filled with liquids, such as vases, shall be placed on Vigitron

equipment.

- DO NOT install the unit in a place where the operating ambient tempera

ture exceeds 75°C.

- Make sure that the external power supply output voltage is in the recom

mended range.

- Do not install near any heat sources such as radiators, heat registers,

stoves or other apparatus (including DVRs) that produce heat.

- Protect the power cord from being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit from the

apparatus.

- Only use attachments/accessories specified by the manufacturer.

- Unplug this apparatus during lightning storms or when unused for long

periods of time.

- Refer all servicing to qualified service personnel. Servicing is required

when the apparatus has been damaged in any way, such as a power

supply cord or plug is damaged, liquid has been spilled, or objects have

fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

- The mains plug is used as the disconnect device and shall remain readily

operable.

WARNING! - To reduce the risk of fire or electric shock, do not expose

this apparatus to rain or moisture. This apparatus shall not be exposed to

dripping or splashing and no objects filled with liquids, such as vases shall

be placed on the apparatus.

WARNING! - This apparatus is a Class I product. This product must

be connected to a mains socket outlet thru an AC to DC Power supply.

WARNING! - The mains plug is used as the disconnect device and

shall remain readily operable.

PART No. Description

Vi2400A

Single port Mini Coax Ethernet Extender

Vi2404A

4-port Coax Ethernet Extender

Vi2408A 8-port

Coax

Ethernet Extender, 19”, 1U

Vi2416A 16-port Coax Ethernet Extender,

19”, 1U

Limited Lifetime Warranty

Vigitron, Inc. warrants that all Vigitron products (“Product”), if used in accordance

with these instructions, will be free of defects in material and workmanship for

lifetime defined as the duration period of time until product end of life is announce-

ment. After which Vigitron will continue to provide warranty services for a period of 3

years. Period covering valid warranty will be determined by proof of purchase in the

form of an invoice from an authorized Vigitron dealer.

Warranty will only be provided for as long as the original end user purchaser owns

the product. Warranty is not transferrable. At Vigitron's option, defective product will

be repaired, replaced or substituted with a product of equal value. This warranty

does not apply if, in the judgment of Vigitron, Inc., the Product fails due to damage

from shipment, handling, storage, accident, abuse or misuse, or if it has been used

or maintained not conforming to Product manual instructions, has been modified, or

serial number removed or defaced. Repair by anyone other than Vigitron, Inc. or an

approved agent will void this warranty. Vigitron, Inc. shall not under any circum-

stances be liable to any person for any incidental, indirect or consequential

damages, including damages resulting from use or malfunction of the product, loss

of profits or revenues or costs of replacement goods. The maximum liability of

Vigitron, Inc. under this warranty is limited to the original purchase price of the

Product only.

Technical Specifications*

RoHS

Drawings

Electrical

Ethernet Interface Standard 10/100BaseT

Ethernet Rate Auto select 10/100 Mb/s

Full speed / full duplex at maximum rated distance

Coax (data only)** 75 Ohm, 5000 ft (1,524 m) at 10BaseT

1,800 ft (548 m) at 100BaseT

Coax (with PoE)** 3,000 ft (914m) at 10 BaseT

1,800 ft (546m) at 100 BaseT

Power Supply 12 VDC, 1.8 W w/POE af/at, 1.5 W w/external power supply

Connectors Ethernet Interface: RJ-45 Connector

Extended Interface: 11” mini Coax and Female BNC

Power: IEC380-8 inlet

Environmental

Humidity 0 to 95%, non-condensing

Temperature Operating: -40°C to +75°C

Storage: -40°C to +85°C

Mechanical

Dimensions 0.83x1.6x2.2 in., 2.1x4.0x5.6 cm (HxWxL)

Weight 0.212 lb, 96 g

Material Extruded Aluminum

Accessories

12 VDC wall-mount power supply (optional)

*Specifications subject to change without notice.

**Distance figures are obtained using in house testing mirroring installations. Factors such as cabling, connections,

use of power and environmental conditions may affect actual distances and should be taken into consideration.

Ordering Information

Ethernet Status LEDs

TEL (+1) 858 - 484 - 5209 • FAX (+1) 858 - 484 - 1205

7810 Trade Street, Suite 100, San Diego, CA 92121, USA • support@vigitron.com • www.vigitron.com

Manual_Vi2400A_1118

LED Name Color Status Function

OFF Power is OFF

ON Power is ON

OFF No Traffic

FLASHING Traffic

GREEN ON Connection is OK, 10BaseT Mode

ON Connection is OK, 100BaseT Mode

OFF No connection

FLASHING Connection is OK with Traffic

OFF No connection

ON Connection is OK

Link

(Standard Side)

Power RED

Traﬃc

(Extended Side) YELLOW

10/100 BaseT

(Extended Side)

Traﬃc

(Standard Side) GREEN

YELLOW

RED

Ethernet Switch/NVR-end Installation (Cont.)

- If the Vi2400A receives power using PoE, make certain the power adaptor

is not connected. The Vi2400A and camera will receive power from the

PSE source.

- If a PSE source such as a PoE network switch is not available, external

power must be provided to the Vi2400A.

CAUTION:

If the external power adaptor is connected with no power applied the

Vi2400A will not reference to a PoE source and the system will be

inoperative.

Extended

Ethernet

Traffic Link

Traffic

10/100

Vi2401A

Single port Coax Ethernet Extender

Note:

Single pair wire application designs need to be confirmed by Vigitron tech support.

Left View

0.97"

2.86"

0.9”

Mounting Pattern

Top View

1.75”

11"

Ethernet & PoE Extender over Coax

Vi2400

Made in U.S.A.

Power

Right View

Power

12DC

Product specificaties

Merk:	Barox
Categorie:	Wifi-repeater
Model:	VI-COAX-2400A
Kleur van het product:	Zwart
Gewicht:	100 g
Breedte:	55 mm
Diepte:	45 mm
Hoogte:	27 mm
Soort:	Netwerkzender
LED-indicatoren:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	1
Ethernet LAN, data-overdrachtsnelheden:	10, 100 Mbit/s
Bekabelingstechnologie:	10/100Base-T(X)
Netwerkstandaard:	IEEE 802.3, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u
Maximaal bereik:	500 m
Overdrachtssnelheid:	100 Mbit/s
AC-ingangsspanning:	12 V
Stroomverbruik (typisch):	2 W
Bedrijfstemperatuur (T-T):	-40 - 75 °C
Aantal RJ-45-poorten (zender):	1