Barkan T580 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Barkan T580 (57 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 69 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/57
EN 02
ES 03
FR 04
IT 05
PT 06
DE 07
NL 08
DA 09
SV 10
EL 11
TR 12
RO 13
HU 14
PL 15
CZ 16
SK 17
SL 18
LV 19
BG 20
RU 21
UA 22
KZ 23
HE 24
AR 25
ZH 26
For further information, visit us at:
W W W . B A R K A N M O U NT S . C OM
SAFETY
INSTRUCTIONS
& WARRANTY
European Standard
2
EN
CAUTION! Ignoring the safety and assembly instructions may lead to the falling of the
mount/ shelf and/ or the electrical appliance. If you are not able to/ or lack the experience
to carry out wall or ceiling installation, contact a suitable professional installer or contact
the store of purchase for further advice. If installed by an appropriate professional, please,
make sure he/ she has the necessary experience in assembling mounts and has read and
understood the safety and assembly instructions.
1.
Wall/ ceiling installation surface The supplied screws and bolts are only suitable for
attaching to walls and ceilings made of: concrete, standard 10cm or more concrete
blocks, wood studs/ joists of minimum depth 10cm. (Standard 7cm concrete blocks
are suitable for the installation of xed mounts or movement mounts carrying
electrical appliances weighing a maximum of 25kg). on walls and Do not install
ceilings made of: gypsum board, drywall, light processed blocks, silicate boards/
bricks, a damp wall, weak or very old blocks or wooden panel! For installation on
gypsum or light processed blocks please consult with an authorized installer or
appropriate building specialist to install the product.
2.
Position and height of the installed product Install in such a place where collision
with the product will not lead to injuries. Do not install in hallways or above beds
or chairs.
3. Keep children and unnecessary bystanders away from the assembly area.
4. Tightening of bolts and screws – Carefully tighten all bolts and nuts of 6mm/ ¼ inch
diameter or less, in order to avoid breakage.
5. Installation strength check After installing the mount/ shelf to the wall or ceiling,
perform a strength test of the weight load as indicated in the assembly instructions.
6.
Checking the electrical component attachment to the mount Following the installation
of your home entertainment component, check that it is well connected, securely
attached (per instructions) and can not slip off or disconnect. If unsure regarding
the connection of the component to the mount, consult either the store of purchase
or visit our website at and open the FAQ (frequently asked www.barkanmounts.com
questions) page or contact us through the site.
7.
Mounts with quick connect/ disconnect mechanism After connecting your home
entertainment component to the mount, make sure it is well connected by pulling
slightly on the connection. When disconnecting the component – Whilst holding the
component rmly, remove the security bolt (if one present), press the disconnect
mechanism and remove the component carefully according to the assembly instructions.
8.
Periodic maintenance checks One month after installation, please check that:
A. B. The mount is tight against the wall/ ceiling. The home entertainment component
is well attached to the mount/ shelf. The nuts, bolts and belts (CRT models) have C.
not loosened. Repeat the maintenance checks every six months following installation.
If any faults are found, remove the home entertainment component from the mount
and reassemble the mount as per the assembly instructions.
9.
Movement mounts Oil slightly all pivot points on installation (except the pivot points
inside the LED/ LCD/ Plasma tilt mechanism) and afterwards once a year or whenever
movement becomes difficult.
A. TV (CRT)/ VCR mounts To adjust the viewing angle of the component – push or
pull the mount only. Do not push or pull your home entertainment component.
B. LED/ LCD/ Plasma/ Projector mounts can be turned and tilted by moving the actual
screen or projector. Be careful to carry out all movements gently.
Barkan Mounts Ltd. is not responsible for the installation.
Please ask your installer for an installation warranty certificate.
PRODUCT LIABILITYproduct warranty years appears on product
packaging as well as in company website www.barkanmounts.com
Dear Customer Thank you for purchasing Barkan's high quality product. We wish you many
hours of pleasant viewing and listening. Barkan Mounts Ltd. undertakes to repair or replace
this product in our warehouse, free of charge, to the extent that due to a manufacturing
flaw or improper raw materials. If a claim is made under this guarantee, the product should
be returned prepaid freight, with the original purchasing document to your dealer or to
Barkan distributor.
This warranty does not apply to:
1. Ignoring of safety & assembly instructions.
2. Coating defects.
3. Normal wear. Friction damages.
4. Installing other products to the mount/ shelf, not manufactured by Barkan.
5. Modification or repairs not made by Barkan.
6. Damage caused by accident or force majeure.
7. Damage caused by misuse or abuse or harm to the product.
8.
Mounting the product to the wall/ ceiling. Installing the electrical appliance to the product.
9. Breakage of the plastic covers or glass.
10.
Any damage caused to the electronic equipment or to the surrounding by the use of
this product.
SAFETY INSTRUCTIONS & WARRANTY


Product specificaties

Merk: Barkan
Categorie: Niet gecategoriseerd
Model: T580

Heb je hulp nodig?

Als je hulp nodig hebt met Barkan T580 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Barkan

Barkan

Barkan T580 Handleiding

27 November 2022

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd