Baby Lock Accomplish 2 Handleiding

Baby Lock Naaimachine Accomplish 2

Lees hieronder de 📖 handleiding in het Nederlandse voor Baby Lock Accomplish 2 (3 pagina's) in de categorie Naaimachine. Deze handleiding was nuttig voor 49 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
• Pull up the thread antenna to its highest position. Place the thread
spool on the first spool pin. Pass the thread up through the first
triangular hole on the antenna and then down through eyelet
and around the tension disk.
• Pass the thread through the bobbin winding thread guide as
shown on the machine.
• Bring thread through the top thread notch on the bobbin.
Position bobbin on post.
• Pull latch lever to hold bobbin in place and return it to its
original position.
• Pass thread through the quick bobbin threading device until
the thread is cut.
• Press the bobbin winding clutch up against empty bobbin.
Start winding the bobbin a few rotations, then stop and trim the
extra thread next to the notch on the bobbin.
• Stop the winding process when the bobbin is full, then manually
move the bobbin winding clutch back to its original position.
Remove bobbin and cut the thread.
• To locate the bobbin case, raise the needle plate, lower the
door and place the bobbin inside the bobbin case. Bobbin
should be positioned so it winds to the left. Run the thread
through the thread notch and under latch spring, so that a
length of thread is exposed.
1.
2.
3.
4.
5.
let’s get to the basics
Your machine is out of the box and you have plenty of ideas waiting to get out,
right? Let’s get the basics out of the way. Before you start sewing, you’ll have
to wind a bobbin and then thread your machine. But don’t be intimidated – it’s
easier than you think with Accomplish 2’s friendly features. Once you’ve followed
these quick and easy steps, simply select a stitch and you’re ready to sew!
the bobbin
D02F7J-001
the needle
• Thread through antenna and eyelet as shown in directions.
Thread the tension guide with thread from the top down,
repeating until all three holes are threaded. 1.
2.
3.
4.
5.
• Bring thread down and around the tension assembly,
making sure to catch the tension spring before traveling up
to the take-up lever.
• Bring up the bobbin thread by holding the needle thread
and turning the hand wheel one full rotation towards you.
The bobbin thread will loop around the needle thread. Pull
the loop through to retrieve the bobbin thread.
• Turn handlewheel counterclockwise, or toward you, to
bring needle and take-up lever to the highest position.
Thread take-up lever.
• Lower the presser foot. Pull down the needle threader, bring
the thread around the needle threader and in front of the eye
of the needle.


Product specificaties

Merk: Baby Lock
Categorie: Naaimachine
Model: Accomplish 2

Heb je hulp nodig?

Als je hulp nodig hebt met Baby Lock Accomplish 2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Naaimachine Baby Lock

Handleiding Naaimachine

Nieuwste handleidingen voor Naaimachine