B-tech BT7060 Handleiding

B-tech Flat panel steun BT7060

Lees hieronder de 📖 handleiding in het Nederlandse voor B-tech BT7060 (2 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 53 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

www.btechavmounts.com

v.0209 OR1BX

Asia Pacific

B-Tech International (Hong Kong) Ltd.

23rd Floor, Manulife Tower, North Point, HK

Tel: (+852) 2556 7337 Fax: (+852) 2556 7321

Email: info@btechavmounts.com.hk

Europe

B-Tech PRO-AV bvba

Brixtonlaan 32, Zaventem 1930,Brussels, Belgium

Tel: +32 (0)2 720 92 71 Fax: +32 (0)2 725 42 15

Email: info@btechproav.com

North America

B-Tech Audio Video Mounts.

10 Greg Street, #108, Sparks, NV 89431, USA

Tel: (1)800 975 5812 Fax: (1)800 592 2876

Email: info@btechavmounts.com

Head Oﬃce

B-Tech International Ltd.

Bennett House, Long March, Daventry, Northants NN11 4NR, UK

Tel: +44 (0)1327 300 787 Fax: +44 (0)1327 706 562

Email: info@btechavmounts.co.uk

PAGE 1 / 3

This pack contains:

1 heavy duty collar with covers Caution: Do not exceed the maximum weight limit indicated for this product.

Failure to comply may cause instability and possible serious injury.

Made in China

This collar is intended for use only with the maximum

weights indicated. Use with heavier than the maximum

indicated may result in instability causing possible injury.

• Heavy duty accessory collar for use with 60mm poles

• Provides attachment for B-Tech modulus system mounts

• Double attachment

• Aesthetic cover plates included to hide fasteners

O61

100

Important Safety Instructions.

Read first

Do not attempt to install this product until all instructions and warnings have been read and

properly understood. Please keep these instructions for future reference.

B-Tech International Limited, its distributors and dealers are not liable or responsible for

damage or injury caused by improper installation, improper use or failure to observe these

safety instructions. In such cases, all guarantees will expire.

General

B-Tech International Ltd recommends that a professional AV installer or other suitably qualified

person install this product. Great care must always be taken during installation as most AV

equipment is of a fragile nature, possibly heavy and easily damaged if dropped.

If you do not fully understand the instructions or are not sure how to install this product safely,

then please consult a professional for advice and/or to install this product for you. Failure to

mount this product correctly may cause serious injury or death both during installation and at

any time thereafter.

Do not mount any AV equipment that exceeds the specific weight limit of the product you are

installing. This weight limit will be clearly stated on each product and its packaging and will

vary from product to product.

Product location

Please pay careful attention to where this product is located.

If located in a public or frequently populated area ensure that the product is out of the

immediate reach of people. If any AV equipment is to be suspended over the likely path or

location of people then great care should be taken to secure all parts of the installation from

falling.

Fixing hardware

It is highly recommended that all fixing screws be used where supplied and that the purpose of

all other fixing hardware is fully understood.

The installer must be satisfied that any supplied fixing hardware is suitable for each specific

installation. If any fixing screws or included hardware are deemed not sufficient for a safe

installation then please consult a professional or your local hardware store.

Hazard limitation

Some products have moving parts and the potential to cause injury through the crushing or

trapping of fingers or other body parts.

Particular attention to the nature of moving parts is required especially when assembling

installing and adjusting during set up.

Immediately after installations double-check that the work done is safe and secure. Double-

check all necessary fixings are present and are of ample tightness.

It is recommended that periodic inspections of the product and its fixing points are made as

frequently as possible to ensure that safety is maintained. If in doubt consult a professional AV

installer or other suitably qualified person.

Attention!

For additional security and/or safety, an optional safety bolt is provided (Part 5). The pole may be drilled

through to accomodate this bolt at the installers discretion. The absence of this bolt does not effect the load

bearing capacity or stability of the collar, provided that the four grub screws (Part 2) are sufficiently tightend.

v. 0209 OR1BX

PAGE 2 / 3

PART NAME DESCRIPTION QTY

1 BT7060 COLLAR

TO FIT 60MM POLES

2 M10 X 20mm GRUB SCREWS

TO CLAMP COLLAR TO POLE

3 M8 SPRING WASHER

SITS UNDER SCREW HEADS

4 M8 X 12mm FLAT HEAD CROSS

SCREW

TO ATTACH ACCESSORIES

5 M8 X 80mm SAFETY BOLT

PASSES THROUGH POLE

BT7060 COLLAR COVERS HALF PUSH FIT AROUND COLLAR 2

7 5mm ALLEN KEY

TO TIGHTEN (PARTS 2 & 5)

Spare screws and

washers are provided

for use on the other

side of the collar if two

accessories need to

be attached.

Covers cannot be

used in this situation.

Product specificaties

Merk:	B-tech
Categorie:	Flat panel steun
Model:	BT7060
Kleur van het product:	Zwart
Breedte:	100 mm
Diepte:	84 mm
Hoogte:	51 mm
Aantal per verpakking:	1 stuk(s)
Type product:	Kraag