Autel MaxiSys Ultra S2 Handleiding

Autel Niet gecategoriseerd MaxiSys Ultra S2

Lees hieronder de 📖 handleiding in het Nederlandse voor Autel MaxiSys Ultra S2 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 6 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

All information, specifications and illustrations in this manual are

based on the latest information available at the time of printing.

Autel reserves the right to make changes at any time without notice.

No part of this manual may be reproduced, stored in a retrieval

system or transmitted, in any form or by any means, electronic,

mechanical, photocopying, recording, or otherwise, without the

prior written permission of Autel.

Indicates a potentially hazardous situation which,

if not avoided, could result in death or serious injury to the

operator or to bystanders.

The safety messages herein cover situations Autel is aware

of. Autel cannot know, evaluate or advise you as to all of the

possible hazards. You must be certain that any condition or

service procedure encountered does not jeopardize your

personal safety.

When an engine is operating, keep the service

area WELL VENTILATED or attach a building exhaust

removal system to the engine exhaust system. Engines

produce carbon monoxide, an odorless, poisonous gas that

causes slower reaction time and can lead to serious

personal injury or loss of life.

Autel®, MaxiSys®, and MaxiDAS® are trademarks of Autel

Intelligent Technology Corp., Ltd., registered in China, the United

States and other countries. All other marks are trademarks or

registered trademarks of their respective holders.

For technical assistance in all other markets, please contact your

selling agent.

Safety messages are provided to help prevent personal injury and

equipment damage. All safety messages are introduced by a

signal word indicating the hazard level.

For your own safety and the safety of others, and to prevent

damage to the equipment and vehicles upon which it is used, it is

important that the safety instructions presented throughout this

manual be read and understood by all persons operating or

coming into contact with the equipment.

There are various procedures, techniques, tools, and parts for

servicing vehicles, as well as in the skill of the individual doing the

work. Because of the vast number of test applications and

variations in the products that can be tested with this instrument,

we cannot possibly anticipate or provide advice or safety

messages to cover every situation.

It is the automotive technician’s responsibility to be knowledgeable

of the system being tested. It is essential to use proper service

methods and test procedures. It is important to perform tests in

an appropriate and acceptable manner that does not endanger

your safety, the safety of others in the work area, the equipment

being used, or the vehicle being tested.

Before using the equipment, always refer to and follow the safety

messages and applicable test procedures provided by the

manufacturer of the vehicle or equipment being tested. Use the

equipment only as described in this manual. Read, understand,

and follow all safety messages and instructions in this manual.

Always perform automotive testing in a safe environment.

Wear safety eye protection that meets ANSI standards.

Indicates an imminently hazardous situation

which, if not avoided, could result in death or serious injury

to the operator or to bystanders.

Keep clothing, hair, hands, tools, test equipment, etc.

away from all moving or hot engine parts.

Operate the vehicle in a well ventilated work area, for

exhaust gases are poisonous.

Put the transmission in PARK (for automatic transmission)

or NEUTRAL (for manual transmission) and make sure the

parking brake is engaged.

Put blocks in front of the drive wheels and never leave the

vehicle unattended while testing.

Be extra cautious when working around the ignition coil,

distributor cap, ignition wires and spark plugs. These

components create hazardous voltages when the engine is

running.

Keep a fire extinguisher suitable for gasoline, chemical, and

electrical fires nearby.

Do not connect or disconnect any test equipment while the

ignition is on or the engine is running.

Keep the test equipment dry, clean, free from oil, water or

grease. Use a mild detergent in a clean cloth to clean the

outside of the equipment as necessary.

Do not drive the vehicle and operate the test equipment at

the same time. Any distraction may cause an accident.

Refer to the service manual for the vehicle being serviced

and adhere to all diagnostic procedures and precautions.

Failure to do so may result in personal injury or damage to

the test equipment.

To avoid damaging the test equipment or generating false

data, make sure the vehicle battery is fully charged and the

connection to the vehicle DLC is clean and secure.

Do not place the test equipment on the distributor of the

vehicle. Strong electro-magnetic interference can damage

the equipment.

support@autel.com

1-855-288-3587 (North America)

+86 (0755) 8614-7779 (China)

IMPORTANT SAFETY INSTRUCTION

6. Docking Station Port

7. Speaker

8. Collapsible Stand — extends from the back to

allow hands-free viewing of the tablet

9. Rear Camera

10. Camera Flash

MAXISYS ULTRA S2

1. 13.7-inch TFT-LCD Capacitive Touchscreen

2. Ambient Light Sensor — detects ambient brightness

3. Power LED

4. Front Camera

5. Microphone

11. Headphone Jack

12. USB Port

13. USB Port

14. Mini SD Card Slot

15. HDMI (High-Definition Multimedia Interface) Port

16. Type-C Charging Port

17. DC Power Supply Input Port

18. Power/Lock Button — long press to turn on & off the

tablet, or short press to lock the screen

The MaxiSys system has two main components:

MaxiSys Tablet — the central processor and monitor

for the system

MaxiFlash VCMI2 — the vehicle communication and

measurement interface

11 12 13 14 15 16 17

MaxiSys Tablet

1. Multimeter Jacks

2. USB Port

3. Hook

4. DC Power Supply Input Port

5. Power Button

6. Power LED refer to Table 1-1 Power LED Description for details—

7. Battery LED refer to Table 1-2 Battery LED Description for details—

8. Waveform Generator LED lights green when operating in the waveform —

generator mode

9. Multimeter LED — lights green when operating in the multimeter mode

Do not disconnect this programming device while the vehicle LED is on! If programming is interrupted while

the vehicle’s ECU is blank or only partially programmed, the module may be unrecoverable.

MAXISYS ULTRA S2

MaxiFlash VCMI2

Lights yellow automatically at power up when VCMI2 is self-testing.

Lights solid green when powered on.

• Lights solid red when system failure occurs.

• Flashes red when VCMI2 is upgrading.

Table 1-1 Power LED Description

LED Color Description

Power

Yellow

Green

Red

• Flashes green when VCMI2 is charging.

• Lights solid green when fully charged or the battery level is above 50%.

Lights yellow when the battery level is above 25% but below 50%.

• Lights red when the battery level is above 10% but below 25%.

• Flashes red when the battery level is below 10%.

Table 1-2 Battery LED Description

LED Color Description

Battery

Green

Yellow

Red

10. Oscilloscope LED flashes green when operating —

in the oscilloscope mode

11. Vehicle LED refer to Table 1-3 Vehicle LED —

Description for details

12. Ethernet Port

13. Vehicle Data Connector (DB26-Pin)

14. Input Channel A

15. Input Channel B

16. Input Channel C

17. Input Channel D

• Lights solid green when connected via USB cable.

• Flashes green when communicating via USB/Ethernet cable.

• Lights solid blue when connected via Ethernet cable/Bluetooth.

• Flashes blue when communicating via Bluetooth.

• Lights solid cyan when connected via Wi-Fi.

• Flashes cyan when communicating via Wi-Fi.

Table 1-3 Vehicle LED Description

LED Color Description

Vehicle

Green

Blue

Cyan

12 13

16 171 2 3 4 5

Product specificaties

Merk:	Autel
Categorie:	Niet gecategoriseerd
Model:	MaxiSys Ultra S2

Heb je hulp nodig?

Als je hulp nodig hebt met Autel MaxiSys Ultra S2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Autel

Autel MaxiSys Ultra S2 Handleiding

24 Maart 2025

Autel MaxiEV ALT100L Handleiding

24 Mei 2024

Autel MaxiEV ITS100 Handleiding

24 Mei 2024

Autel Alpha Handleiding

5 April 2024

Autel MaxiCOM MK900 Handleiding

23 Maart 2024

Autel MaxiCOM MK900-TS Handleiding

23 Maart 2024

Autel MaxiCOM MK908 Pro Handleiding

23 Maart 2024

Autel Mapper Handleiding

5 Januari 2024

Autel MaxiSys MS908S3 Handleiding

27 November 2023

Autel EVO Max 4N Handleiding

3 Augustus 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

WEG MPW18-3-D004 Handleiding

25 Maart 2025

WEG MPW40-3-U001 Handleiding

25 Maart 2025

Ikan PT4500S-TMW Handleiding

24 Maart 2025

ETON UG VW T5 F3.2 Handleiding

24 Maart 2025

Airlive POE-GSH402-BT Handleiding

24 Maart 2025

Silver Cross Geneva Wardrobe Handleiding

24 Maart 2025

Kanto CM-EXT60 Handleiding

24 Maart 2025

Thermador VTN2DA Handleiding

24 Maart 2025

Genexis FiberBox XGS2120 Handleiding

24 Maart 2025

Vello HGS-2 Handleiding

24 Maart 2025