Auralex ProGO 44 Handleiding

Auralex Niet gecategoriseerd ProGO 44

Lees hieronder de 📖 handleiding in het Nederlandse voor Auralex ProGO 44 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Installation & User Guide

Auralex® Acoustics, Inc.

1-800-959-3343 317-842-2600 Auralex.com| |

9955 Westpoint Drive, Suite 101, Indianapolis IN USA 46256

ProGO™ 26 & ProGO™ 44

968-213a.ProGO-26 & 44 UG (01/12/2020 - 6:28 PM)

Thank you for purchasing the Auralex® ProGO. This is a highly effective portable acoustic absorption

device that can be easily positioned anywhere in a room to achieve the desired acoustical tuning.

1. Unpack the ProGO panel assembly and set aside.

2. Retain the Expanded Polystyrene (EPS) packing

pad for stand assembly.

3. Place the 20” (50.8) cm square sheet of EPS on a ﬂat rigid work

surface.

4. Stand the bottom panel on end with the top surface next to the EPS

pad.

5. Insert one of the supplied screws through one of the upper holes in

the base from the bottom side (the side containing the ﬁve sets of

pilot holes).

6. Position one of the upright panels on top of the EPS pad and

perpendicular to the top surface of the bottom panel.

7. Align the tip of the screw with the appropriate pilot hole in the

bottom edge of the upright panel and start by hand.

8. Insert the remaining three screws through the base panel, align

with the corresponding holes and snug by hand.

9. Tighten the screws with a power screw driver.

10. Repeat this process for the remaining upright panel.

The ProGO-26 Contains:

(1) 24” x 72” ProGO absorption panel

(1) 12” x 24” Base plate with eight through

holes. There are ﬁve sets of pilot holes on

the bottom for the addition of the optional

caster kit.

(2) 22” x 7.75” Upright panels

(8) Screws

(4) Rubber isolation feet

NOTE: The four pilot holes in the

bottom, unﬁnished edges of the

upright panels

TOOLS NEEDED: #3 Phillips screw driver. A power driver with adjustable clutch is recommended. Start with a lower

clutch setting to avoid stripping screw heads or the wood panels!

The ProGO-44 Contains:

(1) 48” x 48” ProGO absorption panel

(2) 12” x 24” Base plate with eight through

holes. There are ﬁve sets of pilot holes on

the bottom for the addition of the optional

caster kits.

(4) 22” x 7.75” Upright panels

(16) Screws

(8) Rubber isolation feet

(1) 20” x 20” x 1” (50.8 cm x 50.8 cm

x 2.54 cm) EPS pad

1-800-959-3343 317-842-2600 Auralex.com| |

9955 Westpoint Drive, Suite 101, Indianapolis IN USA 46256

Installation & User Guide

11. Apply the supplied rubber isolation feet to the

bottom corners of the base if casters will not be

added. Delete this step if casters will be installed

and refer to the installation guide supplied with

the ProGO caster kit.

12. Insert the ProGO panel assembly into the space between

uprights of the assembled base.

ProGO-26

ProGO-44

Product specificaties

Merk:	Auralex
Categorie:	Niet gecategoriseerd
Model:	ProGO 44
Kleur van het product:	Zwart
Breedte:	1220 mm
Hoogte:	1220 mm
Montagewijze:	Vrijstaand
Land van herkomst:	Verenigde Staten
Aantal per verpakking:	1 stuk(s)
Dikte:	10 mm
Kleuring:	Monochromatisch
Type product:	Geluidsscherm
Eenvoudig te verplaatsen:	Ja